Panasonic CF-T5 Series User manual

Please read these instructions carefully before using this product and save this manual for future use.
Contents
Getting Started
Useful Information
Troubleshooting
Getting StartedUseful InformationTroubleshootingAppendix
Appendix
OPERATING INSTRUCTIONS
Personal Computer
Model No. CF-T5 series
Introduction .................................................2
Read Me First ..............................................3
Description of Parts .......................................9
First-time Operation .....................................11
On-screen Manual.......................................16
Handling and Maintenance .............................17
Expanding Memory......................................19
Hard Disk Backup Function (Recover Pro)...........21
Hard Disk Data Erase Utility ...........................23
Reinstalling Software....................................24
Troubleshooting (Basic)/Error Code/Message.......26
Hardware Diagnostics...................................30
LIMITED USE LICENSE AGREEMENT ..............32
Specifications ............................................33
For further information about the com-
puter, you can refer to the on-screen
manual.
To access the on-screen manual
Îpage 16 “On-screen Manual”
CF-T5mk2_EN.book 1 ページ ２００７年１１月２８日 水曜日 午後１時１４分

2
Getting Started
Introduction
Thank you for purchasing this Panasonic computer. For optimum performance and safety, please read these instruc-
tions carefully.
Terms and illustrations in these instructions
zSome illustrations are simplified to help your understanding and may look different from the actual unit.
zIf you do not log on as an administrator, you cannot use some functions or cannot display some screens.
zRefer for the latest information about optional products to the catalogs, etc.
zIn these instructions, the names and terms are referred as follows.
• “Microsoft®Windows®XP Professional Service Pack 2 with Advanced Security Technologies” as “Windows” or
“Windows XP”
zThe display modes are referred as follows. ( ) indicates the terms in [Intel®Graphics Media Accelerator Driver for
mobile] screen. To display the screen, select [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA
Driver for Mobile].
• Internal LCD (Notebook): The computer’s display
• External display (Monitor): External display
• Simultaneous display (Intel®Dual Display Clone): The same screen is displayed on the internal LCD and the
external display.
• Extended desktop: The extended working area across the internal LCD and the external display.
Copyright
This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may
be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.
No patent liability is assumed with respect to the use of the information contained herein.
© 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Disclaimer
Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd.
assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the com-
puter and the manuals.
Trademarks
Microsoft®, Windows®, IntelliMouse and the Windows logo are registered trademarks of Microsoft Corporation of the
United States and/or other countries.
Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation.
SD Logo is a trademark.
Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorpo-
rated in the United States and/or other countries.
Computrace®is a registered trademark of Absolute®Software Corp.
Bluetooth™ is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd.
Panasonic®is a registered trademark of Matsushita Electric Industrial Co., Ltd.
Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective
own companies.
: Conditions that may result in minor or moderate injury.
: Useful and helpful information.
Enter : Press [Enter] key.
Fn + F5 : Press and hold [Fn] key, and then press [F5] key.
[start] - [Run] : Click [start], and then click [Run].
Î: Page in these Operating Instructions.
Î: Reference to the on-screen manuals.
CAUTION
NOTE
CF-T5mk2_EN.book 2 ページ ２００７年１１月２８日 水曜日 午後１時１４分

3
Getting Started
Read Me First
(For model with a “CE” mark on the bottom of the computer)
Declaration of Conformity (DoC)
“Hereby, we declare that this Personal Computer is in compliance with the essential requirements
and other relevant provisions of the Directive 1999/5/EC.”
Hint:
If you want to get a copy of the original DoC of our products which relates to the R&TTE, please con-
tact our web address: http://www.doc.panasonic.de
Contact and Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Service Europe, a division of
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany
Network connection.
The terminal equipment is intended for connection to the following public network;
In all the countries of European Economical Area;
- Public Switched Telephony Networks
Technical Features.
The terminal equipment includes the following features;
- DTMF dialing
- Maximum bitrate receiving mode: 56 kbit/s
- Maximum bitrate sending mode: 33.6 kbit/s
This product is designed to interwork with the Public Switched Telecommunication Networks in UK, Ireland, Nether-
lands, Sweden, Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Germany, Spain, Portugal, Iceland,
Greece, Italy, Norway, Austria, Poland, Hungary, Czech, Slovakia, Slovenia, Estonia, Latvia, Lithuania, Cyprus, Malta,
Rumania, Bulgaria and Liechtenstein.
18-E-2
(Only for model with a “CE ” mark on the bottom of the computer)
Declaration of Conformity (DoC)
Hereby, we declare that this Personal Computer is in compliance with the essential requirements
and other relevant provisions of the Directive 1999/5/EC.
Hint:
If you want to get a copy of the original DoC of our products which relates to the R&TTE, please contact to our web
address: http://www.doc.panasonic.de
Contact and Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Service Europe, a division of
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany
25-E-1-2
Information of Countries intended for radio application:
The United Kingdom, The Netherlands, Sweden, The Federal Republic of Germany, France, Finland, The Kingdom of
Belgium, Italy, Norway, The Swiss Confederation, Spain, Austria, Portuguese Republic, Czech Republic, Romania, The
Republic of Estonia, Ireland, The Republic of Latvia, The Republic of Lithuania, The Republic of Poland, Denmark, The
Republic of Hungary, The Grand Duchy of Luxembourg, Greece, Slovak Republic, The Republic of Slovenia
Models for Europe
CF-T5mk2_EN.book 3 ページ ２００７年１１月２８日 水曜日 午後１時１４分

4
Read Me First
Getting Started
Warning
This apparatus must be earthed for your safety.
To ensure safe operation the three-pin plug must be inserted only into a standard three-pin power point which is effec-
tively earthed through the normal household wiring.
Extension cords used with the equipment must be three-core and be correctly wired to provide connection to earth.
Wrongly wired extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily does not imply that the power point is earthed and that the installa-
tion is completely safe.
For your safety, if you have any doubt about the effective earthing of the power point, consult a qualified electrician.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 3 amp fuse is fitted
in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 3 amps and that it is
approved by ASTA or BSI to BS 1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the
fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE
SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP
SOCKET.
If a new plug is to be fitted please observe the wiring code as shown below. If in any doubt please consult a qualified
electrician.
Warning: THIS APPLIANCE MUST BE EARTHED.
Important
The wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identify-
ing the terminals in your plug, proceed as follows: The wire which is coloured GREEN-and-YELLOW must be con-
nected to the terminal in the plug which is marked by the letter E or by the safety earth symbol coloured GREEN or
GREEN-and-YELLOW.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured
BLACK.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured RED.
The mains plug on this equipment must be used to disconnect the mains power.
Please ensure that a socket outlet is available near the equipment and shall be easily accessible.
How to replace the fuse
Open the fuse compartment with a screwdriver and replace the fuse.
Warnings
zThis equipment is not designed for connection to an IT power system.
(An IT system is a system having no direct connections between live parts and Earth; the exposed-conducive-parts
of the electrical installation are earthed.
An IT system is not permitted where the computer is directly connected to public supply systems in the U.K.)
zDisconnect the mains plug from the supply socket when the computer is not in use.
This equipment is produced to BS800/1983.
8-E-1
Models for UK
02_PL_W5mk2-T5mk2.fm 4 ページ ２００７年１１月２８日 水曜日 午後１時３２分

5
Getting Started
When using your telephone equipment, basic safety pre-
cautions should always be followed to reduce the risk of
fire, electric shock and injury to persons, including the fol-
lowing:
1. Do not use this product near water, for example, near
a bath tub, wash bowl, kitchen sink or laundry tub, in a
wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk
of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the
vicinity of the leak.
4. Use only the power cord and batteries indicated in this
manual. Do not dispose of batteries in a fire. They may
explode. Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
19-E-1
<Only for model with wireless LAN/Bluetooth>
This product and your Health
This product, like other radio devices, emits radio fre-
quency electromagnetic energy. The level of energy emit-
ted by this product however is far much less than the
electromagnetic energy emitted by wireless devices like
for example mobile phones.
Because this product operates within the guidelines found
in radio frequency safety standards and recommenda-
tions, we believe this product is safe for use by consum-
ers. These standards and recommendations reflect the
consensus of the scientific community and result from
deliberations of panels and committees of scientists who
continually review and interpret the extensive research lit-
erature.
In some situations or environments, the use of this prod-
uct may be restricted by the proprietor of the building or
responsible representatives of the organization. These sit-
uations may for example include:
zUsing this product on board of airplanes, or
zIn any other environment where the risk of interference
to other devices or services is perceived or identified
as harmful.
If you are uncertain of the policy that applies on the use of
wireless devices in a specific organization or environment
(e.g. airports), you are encouraged to ask for authoriza-
tion to use this product prior to turning on the product.
Regulatory Information
We are not responsible for any radio or television interfer-
ence caused by unauthorized modification of this product.
The correction of interference caused by such unautho-
rized modification will be the responsibility of the user. We
and its authorized resellers or distributors are not liable for
damage or violation of government regulations that may
arise from failing to comply with these guidelines.
26-M-1
Lithium Battery!
This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only
be exchanged by authorized service personnel.
Warning! A risk of explosion from incorrect installation or misapplication may possibly occur.
15-E-1
This symbol on the products and/or accompanying documents means that used electrical and electronic
products should not be mixed with general household waste.
Please dispose of this item only in designated national waste electronic collection schemes, and not in
the ordinary dust bin.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for fur-
ther information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of dis-
posal.
36-E-1
Important Safety Instructions
Information to the User
Lithium Battery
Information on Disposal for Users of Waste Electrical & Electronic Equipment
(private households)
CF-T5mk2_EN.book 5 ページ ２００７年１１月２８日 水曜日 午後１時１４分

6
Read Me First
Getting Started
This computer is not intended for use in medical equip-
ment including life-support systems, air traffic control sys-
tems, or other equipment, devices or systems that are
involved with ensuring human life or safety. Panasonic
cannot be held responsible in any way for any damages
or loss resulting from the use of this unit in these types of
equipment, devices or systems, etc.
If a Malfunction Occurs, Immediately Unplug the AC
Plug and the Battery Pack
• The Product is damaged
• Foreign object inside this product
• Smoke emitted
• Unusual smell emitted
• Unusually hot
Continuing to use this product while any of the above con-
ditions are present may result in fire or electric shock.
•I
f a malfunction occurs, immediately turn the power off and
unplug the AC plug, and then remove the battery pack.
Then contact your technical support office.
Do Not Touch This Product and Cable When It Starts
Thundering
Electric shock may result.
Do Not Connect the AC Adaptor to a Power Source
Other Than a Standard Household AC Outlet
Otherwise, a fire due to overheating may result. Connect-
ing to a DC/AC converter (inverter) may damage the AC
adaptor. On an airplane, only connect the AC adaptor/
charger to an AC outlet specifically approved for such use.
Do Not Do Anything That May Damage the AC Cord,
the DC Plug, or the AC Adaptor
Do not damage or modify the cord, place it near hot tools,
bend, twist, or pull it forcefully, place heavy objects on it,
or bundle it tightly.
Continuing to use a damaged cord may result in fire, short
circuit, or electric shock.
Do Not Pull or Insert the DC Plug If Your Hands Are Wet
Electric shock may result.
Clean the DC Plug of Dust and Other Debris Regularly
If dust or other debris accumulates on the plug, humidity, etc.
may cause a defect in the insulation, which may result in a fire.
• Pull the plug, and wipe it with a dry cloth.
Pull the plug if the computer is not being used for a long
period of time.
Insert the AC Plug Completely
If the plug is not inserted completely, fire due to overheat-
ing or electric shock may result.
• Do not use a damaged plug or loose AC outlet.
Do Not Place Containers of Liquid or Metal Objects on
Top of This Product
If water or other liquid spills, or if paper clips, coins, or foreign
matter get inside
this product , fire or electric shock may result.
• If foreign matter has found its way inside, immediately turn
the power off and unplug the AC plug, and then remove the
battery pack. Then contact your technical support office.
Do Not Disassemble This Product
There are high-voltage areas inside which may give you
an electric shock if you should touch them. Do not touch
the pins and circuit boards inside, and do not allow foreign
matter to enter inside.
Also, remodeling or disassembly may cause a fire.
Keep SD Memory Cards Away from Infants and Small
Children
Accidental swallowing will result in bodily injury.
In the event of accidental swallowing, see a doctor imme-
diately.
Do Not Place This Product on Unstable Surfaces
If balance is lost, this product may fall over or drop, result-
ing in an injury.
Avoid Stacking
If balance is lost, this product may fall over or drop, result-
ing in an injury.
Do Not Keep the Computer Wherever There is a Lot of
Water, Moisture, Steam, Dust, Oily Vapors, etc.
Otherwise, possibly resulting in fire or electric shock.
Do Not Leave This Product in High Temperature Envi-
ronment Such as in a Sun-Heated Car, for a Long
Period of Time
Leaving this product where it will be exposed to extremely
high temperatures such as in a sun-heated car or in direct
sunlight may deform the cabinet and/or cause trouble in the
internal parts. Continued use in such a resulting condition
may lead to short-circuiting or insulation defects, etc. which
may in turn lead to a fire or electric shocks.
Hold the Plug When Unplugging the AC Plug
Pulling on the cord may damage the cord, resulting in a
fire or electric shock.
Do Not Move This Product While the DC Plug Is Connected
The AC cord may be damaged, resulting in fire or electric shock.
• If the AC cord is damaged, unplug the DC plug immediately.
Precautions
THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS
PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAF-
FIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT
COCKPIT EQUIPMENT/SYSTEMS*1. PANASONIC WILL
NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING
FROM THE USE OF THIS PRODUCT ARISING OUT OF
THE FOREGOING USES.
*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2
Electrical Flight Bag (EFB) Systems and Class1 EFB Systems
when used during critical phases of flight (e.g., during take-off and
landing) and/or mounted on to the aircraft. Class1 EFB Systems
and 2 EFB Systems are defined by FAA: AC (Advisory Circular)
120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36.
Panasonic cannot guarantee any specifications, tech-
nologies, reliability, safety (e.g. Flammability/Smoke/
Toxicity/Radio Frequency Emission, etc) requirements
related to aviation standards that exceed the specifica-
tions of our COTS (Commercial-Off-The-Shelf) products.
39-E-1
CF-T5mk2_EN.book 6 ページ ２００７年１１月２８日 水曜日 午後１時１４分

7
Getting Started
Use Only the Specified AC Adaptor With This Product
Using an AC adaptor other than the one supplied
(attached to your product or supplied by Panasonic) may
result in a fire.
Do Not Subject the AC Adaptor to Any Strong Impact
Using the AC adaptor after a strong impact such as being
dropped may result in electric shock, short circuit, or fire.
Take a Break of 10-15 Minutes Every Hour
Using this product for long periods of time may have detri-
mental health effects on the eyes or hands.
Do Not Turn the Volume Up to Loud When Using
Headphones
Listening at high volumes that overstimulate the ear for
long periods of time may result in loss of hearing.
Use the Modem with a Regular Telephone Line
Connection to an internal phone line (on-premise
switches) of a company or business office, etc. or to a dig-
ital public phone or use in a country or area not supported
by the computer may result in a fire or electric shocks.
Do Not Connect a Telephone Line, or a Network Cable
Other Than the One Specified, into the LAN Port
If the LAN port is connected to a network such as the
ones listed below, a fire or electric shock may result.
• Networks other than 100BASE-TX or 10BASE-T
• Phone lines (Telephone lines, internal phone lines (on-
premise switches), digital public phones, etc.)
Do Not Use with Exposing the Skin to This Product
for a Long Period of Time
Using this product with exposing the skin to the heat
source of this product or AC adaptor for a long period of
time can cause a low-temperature burn.
zDo not place the computer near a television or radio
receiver.
zKeep the computer away from magnets. Data stored
on the hard disk may be lost.
11-E-1
Interface Cable
Use of an interface cable longer than 3 m (9.84 feet) is
not recommended.
CF-T5mk2_EN.book 7 ページ ２００７年１１月２８日 水曜日 午後１時１４分

8
Read Me First
Getting Started
Do Not Use with Any Other Product
The battery pack is rechargeable and was intended for
the specified product. If it is used with a product other
than the one for which it was designed, electrolyte leak-
age, generation of heat, ignition or rupture may result.
Do Not Charge the Battery Using the Methods Other
Than Those Specified
If the battery is not charged using one of the specified
methods, electrolyte leakage, generation of heat, ignition
or rupture may result.
Do Not Throw the Battery Pack into a Fire or Expose It
to Excessive Heat
Generation of heat, ignition or rupture may result.
Avoid Extreme Heat (Near the Fire, in Direct Sunlight,
for Example)
Electrolyte leakage, generation of heat, ignition or rupture
may result.
Do Not Insert Sharp Objects into the Battery Pack,
Expose It to Bumps or Shocks, Disassemble, or Mod-
ify It
Electrolyte leakage, generation of heat, ignition or rupture
may result.
Do Not Short the Positive (+) and Negative (-) Con-
tacts
Generation of heat, ignition or rupture may result. Do not
place the battery pack together with articles such as neck-
laces or hairpins when carrying or storing.
Do Not Use This Product with a Battery Pack Other
Than the One Specified
Use only the specified battery pack (CF-VZSU37U) with
your CF-T5. Use of battery packs other than those manu-
factured and supplied by Panasonic may present a safety
hazard (generation of heat, ignition or rupture).
zDo not touch the terminals on the battery pack. The
battery pack may no longer function properly if the
contacts are dirty or damaged.
zDo not expose the battery pack to water, or allow it to
become wet.
zIf the battery pack will not be used for a long period of
time (a month or more), charge or discharge (use) the
battery pack until the remaining battery level becomes
30% to 40% and store it in a cool, dry place.
zThis computer prevents overcharging of the battery by
recharging only when the remaining power is less than
approx. 95% (when Economy Mode (ECO) is enabled:
75%) of capacity.
zThe battery pack is not charged when the computer is
first purchased. Be sure to charge it before using it for
the first time. When the AC adaptor is connected to the
computer, charging begins automatically.
zShould the battery leak and the fluid get into your
eyes, do not rub your eyes. Immediately flush your
eyes with clear water and see a doctor for medical
treatment as soon as possible.
NOTE
zThe battery pack may become warm during
recharging or normal use. This is completely nor-
mal.
zRecharging will not commence if internal tempera-
ture of the battery pack is outside of the allowable
temperature range (0 °C to 55 °C). (ÎRefer-
ence Manual “Battery Power”)
Once the allowable range requirement is satisfied,
charging begins automatically. Note that the
recharging time varies based on the usage condi-
tions. (Recharging takes longer than usual when
the temperature is 10 °C or below.)
zIf the temperature is low, the operating time is
shortened. Only use the computer within the allow-
able temperature range.
zThe battery pack is a consumable item. If the
amount of time the computer can be run by using a
particular battery pack becomes dramatically
shorter and repeated recharging does not restore
its performance, the battery pack should be
replaced with a new one.
zWhen transporting a spare battery inside a pack-
age, briefcase, etc., it is recommended that it be
placed in a plastic bag so that its contacts are pro-
tected.
zAlways power off the computer when it is not in
use. Leaving the computer on when the AC adap-
tor is not connected will exhaust the remaining bat-
tery capacity.
Precautions (Battery Pack)
CF-T5mk2_EN.book 8 ページ ２００７年１１月２８日 水曜日 午後１時１４分

9
Getting Started
Description of Parts
A :Function Key
ÎReference Manual “Key Combinations”
B :Keyboard
C :LED Indicator
: Caps lock
: Numeric key (NumLk)
: Scroll lock (ScrLk)
: Hard disk drive status
ECO : Economy Mode (ECO) status
ÎReference Manual “Battery Power”
: Battery status
ÎReference Manual “Battery Power”
D :Power Switch
Îpage 12
Power Indicator
• Off: Power off/Hibernation
•Green:Poweron
• Blinking green: Standby
E : Wireless Switch
<Only for model with wireless LAN/Bluetooth>
Switch the wireless devices to on (right side) or to off
(left side).
ÎReference Manual “Disabling/Enabling Wire-
less Communication” “Wireless LAN”
F : Touch Pad
ÎReference Manual “Using the Touch Pad”
G :LCD/Touchscreen
ÎReference Manual “Using the Touchscreen”
H :Speaker
I : LAN Port
If the Mini Port Replicator is connected to the computer,
connect the LAN cable to the LAN port on the Mini Port
Replicator. You cannot use the LAN port on the computer.
ÎReference Manual “LAN”
J : Modem Port
• Be sure to use the included modem telephone cable,
and insert the ferrite core side of modem telephone
cable into the modem port on the computer.
• Do not move/remove the ferrite core of modem tele-
phone cable.
ÎReference Manual “Modem”
K :Security Lock
You can connect a Kensington cable. Refer to the instruc-
tion manual of the cable. The security lock and cable is a
theft prevention device. Matsushita Electric Industrial Co.,
Ltd. will bear no responsibility in the event of theft.
L : USB Ports
ÎReference Manual “USB Devices”
M :Wireless LAN Antenna
<Only for model with wireless LAN>
ÎReference Manual “Wireless LAN”
N :Bluetooth Antenna
<Only for model with Bluetooth>
ÎSupplementary Instructions of “Bluetooth”
90 mm or less
CF-T5mk2_EN.book 9 ページ ２００７年１１月２８日 水曜日 午後１時１４分

10
Description of Parts
Getting Started
EXT.
A :DC-IN Jack
B :External Display Port
If the Mini Port Replicator is connected to the com-
puter, connect the external display to the external dis-
play port on the Mini Port Replicator. You cannot use
the external display port on the computer.
ÎReference Manual “External Display”
C :Mini Port Replicator Connector
Connect the Mini Port Replicator (optional).
ÎReference Manual “Mini Port Replicator”
D :SD Memory Card Slot
ÎReference Manual “SD Memory Card”
E : PC Card Slot
ÎReference Manual “PC Cards”
F : SD Memory Card Indicator
Blinking: During access.
Î
Reference Manual “SD Memory Card”
G :Microphone Jack
A condenser microphone can be used. If other types
of microphones are used, audio input may not be pos-
sible, or malfunctions may occur as a result.
• When recording in stereo using a stereo microphone:
Double-click in the notification area, click
[Options] - [Properties], and add a check mark for
[Recording], click [OK] - [Options] - [Advanced Con-
trols] - [Advanced], remove a check mark for [Mono
Microphone], and then click [Close].
•
When using a monaural microphone with a 2-terminal plug:
With the settings outlined above, only audio on the
left track will be recorded.
When monitoring the microphone audio using head-
phones, sounds on the left track cannot be heard,
regardless of the above settings. This is a result of the
computer’s specifications, and is not a malfunction.
H :Latch
When closing the display, press down firmly from
above until the latch is firmly closed (locked).
I : Headphone Jack
You can connect headphones or amplified speakers.
When they are connected, audio from the internal
speakers is not heard.
J : RAM Module Slot
Îpage 19
K :Battery Latches
Îpage 11
L : Hand Strap
Îpage 15
M :Battery Pack
CF-T5mk2_EN.book 10 ページ ２００７年１１月２８日 水曜日 午後１時１４分

11
Getting Started
First-time Operation
Preparation
ACheck and identify the supplied accessories.
If you do not find the described accessories, contact your technical support office.
BRead the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging
(Îpage 32).
ATurn the computer over and slide the left latch (A) to the unlocked position
().
BInsert the battery pack in the correct direction until it securely fits the connec-
tor.
CSlide the left latch (A) to the locked position ( ).
(Right latch is locked automatically.)
CAUTION
zMake sure the latch is securely locked. Otherwise the battery pack may fall when
you carry the computer.
zDo not touch the terminals of the battery pack and the computer. Doing so can
make the terminals dirty or damaged, and may cause malfunction of the battery
pack and the computer.
APress and hold the latch (B) located at the front.
BLift open the display.
CAUTION
zDo not open the display wider than necessary (140° or more), and do not apply
excessive pressure to the LCD. Do not open or close the computer holding the
edge of the LCD segment.
AC Adaptor AC Cord
Soft Cloth Stylus
Operating Instructions (This book)
Product Recovery DVD-ROM
Windows®Book
Battery Pack
Modem Telephone
Cable
Model No: CF-AA1623A Model No: CF-VZSU37
ÎReference Manual
“Using the Touchscreen”
1 Insert the battery pack.
1
2 Open the display.
2
03_Getting_Started_W5mk2-T5mk2.fm 11 ページ ２００７年１１月２８日 水曜日 午後１時２７分

12
First-time Operation
Getting Started
The battery charging starts automatically.
CAUTION
zDo not disconnect the AC adaptor and do not switch the wireless switch to on
until the first-time operation procedure is completed.
zWhen using the computer for the first time, do not connect any peripheral device
except the battery pack and AC adaptor.
zHandling the AC adaptor
Problems such as sudden voltage drops may arise during periods of thunder and
lightning. Since this could adversely affect your computer, an uninterruptible
power source (UPS) is highly recommended unless running from the battery
pack alone.
Slide and hold the power switch for approximately one second until the
power indicator lights.
CAUTION
zDo not slide the power switch repeatedly.
zThe computer will forcibly be turned off if you slide and hold the power switch for
four seconds or longer.
zOnce you turn off the computer, wait for ten seconds or more before you turn on
the computer again.
z Do not perform the following operation until the hard disk drive indicator turns off.
• Connecting or disconnecting the AC adaptor
• Sliding the power switch
• Touching the keyboard, touch pad or touchscreen
• Closing the display
zDo not change the Setup Utility until completing step 5. If you do so, Windows
setup may not operate properly.
Follow the on-screen instructions.
zThe computer will restart after the setup is complete.
To go to the next step, wait until the hard disk drive indicator has turned
off.
CAUTION
zWhen you set date/time/time zone and click [Next], the screen may not go to the
next step for a few minutes. Do not touch the keyboard, touch pad or touch-
screen, and wait until the screen changes.
zWhen using the included stylus, avoid touching the screen with you hands, etc.
This can cause input errors.
<For MUI OS model>
zThe keyboard will operate as the US keyboard until the keyboard setting is
changed. Because of this, some alphabets shown on display may differ from
inputted ones.
To avoid the accidental selections, during setting up Windows,
• Use the touch pad to make some selections.
• Press the NumLock key and input in the Ten-key mode to input numbers.
zTo match the languages, change the language settings after setting up Windows
(Îpage 13). Do not change the settings in [To change system or these settings,
click Customize] of [Regional and Language Options] during setting up Win-
dows.
3 Connect your computer to a power outlet.
3
4 Turn on the computer.
5 Setup Windows.
4
CF-T5mk2_EN.book 12 ページ ２００７年１１月２８日 水曜日 午後１時１４分

13
Getting Started
NOTE
Install Adobe Reader to read the Important Tips and the Reference Manual.
Click [start] - [Run], input the following, then click [OK].
English: [c:\util\reader\m\AdbeRdr70_enu_full.exe]
Czech: [c:\util\reader\cs\AdbeRdr70_cze_full.exe]
Croatian: [c:\util\reader\yx\AdbeRdr70_hrv_full.exe]
Danish: [c:\util\reader\da\AdbeRdr70_dan_full.exe]
Dutch: [c:\util\reader\nl\AdbeRdr70_nld_full.exe]
Finnish: [c:\util\reader\fi\AdbeRdr70_suo_full.exe]
French: [c:\util\reader\f\AdbeRdr70_fra_full.exe]
German: [c:\util\reader\g\AdbeRdr70_deu_full.exe]
Greek: [c:\util\reader\el\AdbeRdr70_gre_full.exe]
Hungarian: [c:\util\reader\hu\AdbeRdr70_hun_full.exe]
Italian: [c:\util\reader\t\AdbeRdr70_ita_full.exe]
Norwegian: [c:\util\reader\no\AdbeRdr70_nor_full.exe]
Polish: [c:\util\reader\pl\AdbeRdr70_pol_full.exe]
Portuguese: [c:\util\reader\pt\AdbeRdr70_ptb_full.exe]
Romanian: [c:\util\reader\ro\AdbeRdr70_rum_full.exe]
Russian: [c:\util\reader\ru\AdbeRdr70_rus_full.exe]
Spanish: [c:\util\reader\p\AdbeRdr70_esp_full.exe]
Slovenian: [c:\util\reader\sl\AdbeRdr70_slv_full.exe]
Swedish: [c:\util\reader\s\AdbeRdr70_sve_full.exe]
Turkish: [c:\util\reader\tr\AdbeRdr70_tur_full.exe]
<Languages installed in this computer>
Change the language settings in the following menu.
[Start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Regional
and Language Options]
• [Regional Options] - [Standards and Formats]
• [Languages] - [Language used in menus and dialogs]
• [Languages] - [Details] - [Default input language]
• [Advanced] - [Language for non-unicode Programs]
NOTE
zWhen you use MUI OS and localized OS versions together on the same net-
work, use English computer names on localized versions of Windows.
zSome UI (User Interface) strings remain in English even if the user’s UI is set to
another language.
For more information, refer to “c:\windows\mui\relnotes.txt”.
zIf you change the language in [Languages] - [Language used in menus and dia-
logs], the desktop color will be changed when logging on to Windows next time.
The desktop color can be changed by following the procedure below.
Click [start] - [Control Panel] - [Appearance and Themes] - [Display] - [Desktop]
and select color from [Color], then click [OK].
Click [start] - [Control Panel] - [User Accounts] - [Create a new account].
CAUTION
z Remember your password. If you forget the password, you cannot use the Windows
operation system. Creating a password reset disk beforehand is recommended.
6 <For MUI OS model>
Install Adobe Reader
7 <For MUI OS model>
Change the language settings
·English ·Bulgarian ·Croatian ·Czech ·Danish ·Dutch ·Estonian ·Finnish ·French
·German ·Greek ·Hungarian ·Italian ·Latvian ·Lithuanian ·Norwegian ·Polish
·Portuguese ·Romanian ·Russian ·Spanish ·Swedish ·Slovak ·Slovenian ·Turkish
8 Create a new account.
CF-T5mk2_EN.book 13 ページ ２００７年１１月２８日 水曜日 午後１時１４分

14
First-time Operation
Getting Started
AClick [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen
Calibration Utility].
BUsing the stylus, touch each of the 12 “+” target marks one by one until it
blinks, and then click [Calibration].
CClick [Save & Exit].
NOTE
zRegarding Windows XP
You can select the Classic view of Control Panel or the Classic Start menu. You can also change the way a user logs
on or off. This manual explains using the Windows XP default setting (not Classic view or Classic Start menu etc.).
zWindows Update
You can update to the latest patches and service packs for Windows with the following menus.
[start] - [All Programs] - [Windows Update]
Do not apply “Driver Updates” even if a message to update a driver appears. If a driver update is required,
contact your technical support office.
zIf the message “Your computer might be at risk” is displayed
Select (red icon) on the notification area and make the appropriate settings. The Windows Security Center reg-
ularly gives you notice so that you can make the optimum settings. This is not an error message and you can use the
computer. However, making appropriate measures is recommended to reduce the risk of virus and other attacks.
zPC Information Viewer
This computer periodically records the management information including the hard disk information such as number
of hours powered-on, number of times powered-on, internal temperature, replacement sector. The maximum data
volume for each record is 750 byte. These information are only used for estimating the cause when the hard disk
goes down by any possibility. They are never sent to outside via network nor used for any other purpose except for
the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information
history] in [Hard Disk Status] of PC Information Viewer, and click [OK].
(ÎReference Manual “Check the Computer’s Usage Status”)
When Starting Up/Shutting Down
zWhen the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet. About 1.5
W of power is consumed simply by having the AC adaptor plugged into an electrical outlet.
zNote that the computer consumes electricity even when the computer power is off. If the battery pack is fully
charged, the battery will fully discharge in the following period of time:
• When power is off: Approx. 3 months
• In standby: Approx. 6 days
• In hibernation: Approx. 8 days
If
the LAN cable is not connected to the LAN port, the period of time listed above will become slightly longer.
If “Wake up from LAN” is disabled, the period of time in standby will become slightly longer, and the period of
time in hibernation will become about the same as that in power-off.
CAUTION
zDo not do the following
• Connecting or disconnecting the AC adaptor
• Sliding the power switch
• Touching the keyboard, touch pad, touchscreen or external mouse
• Closing the display
9 Perform the touchscreen calibration.
CF-T5mk2_EN.book 14 ページ ２００７年１１月２８日 水曜日 午後１時１４分

15
Getting Started
The hand strap is convenient for computing while standing.
To carry the computer, put your hand between the computer and the
hand strap to prevent it from falling, and firmly hold the computer
when using it.
zYou can adjust the length of the hand strap by the following steps.
1 Peel back the tape (A) on the hand strap.
2 Adjust the length of the band.
3 Close the tape on the hand strap firmly.
Using the Hand Strap
CF-T5mk2_EN.book 15 ページ ２００７年１１月２８日 水曜日 午後１時１４分

16
Useful Information
On-screen Manual
You can access the Reference Manual and the Important Tips on the computer screen after completing the “First-time
Operation”.
When you access the Reference Manual and the Important Tips for the first time, the License Agreement of the Adobe
Reader may be displayed. Read it carefully and select [Accept] to proceed.
Reference Manual
The Reference Manual contains the practical information to help you fully enjoy the computer’s performance.
To access the Reference Manual:
Click [start] - [Reference Manual].
NOTE
z[ACPI Multiprocessor PC] is actually displayed on the screen, however [ACPI Uniprocessor PC] is written on the
Reference Manual “USB Devices”.
Important Tips
The Important Tips will provide you with the helpful information about the battery and touchscreen. Read to use the bat-
tery pack in the optimum condition to obtain longer operation time.
To access the Important Tips:
Double-click on the desktop.
zAlternatively click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips].
NOTE
zWhen Adobe Reader update notice is displayed, we recommend you follow the on-screen procedure and update.
See http://www.adobe.com/ for the latest version of Adobe Reader.
Contents
zRead Me First
zUsing the Touch Pad
zUsing the Touchscreen
zDisplay Rotation
zKey Combinations
zBattery Power
zComputing on the Road
zStandby or Hibernation Functions
zSecurity Measures
zPC Cards
zSD Memory Card
zSD Security
zMini Port Replicator
zExternal Display
zUSB Devices
zModem
zLAN
zDisabling/Enabling Wireless Com-
munication
zWireless LAN
zSetup Utility
zIcon Enlarger
zLoupe Utility
zDMI Viewer
zRecover Pro
zTroubleshooting (Advanced)
zCheck the Computer’s Usage Sta-
tus
zProtecting Your Computer from
Viruses
zUpdate Windows to its Latest Ver-
sion
zTechnical Information
CF-T5mk2_EN.book 16 ページ ２００７年１１月２８日 水曜日 午後１時１４分

17
Useful Information
Handling and Maintenance
zPlace the computer on a flat stable surface. Do not place the computer upright. If the computer is exposed to an
extremely strong impact, it may become inoperable.
zTemperature: Operation: 5 °C to 35 °C
Storage: -20°C to 60 °C
Humidity: Operation: 30% to 80% RH (No condensation)
Storage: 30% to 90% RH (No condensation)
Even within the above temperature/humidity ranges, using for a long time in an extreme environment will result in
the product deterioration and will shorten the product life.
zDo not place the computer in the following areas, otherwise the computer may be damaged.
• Near electronic equipment. Image distortion or noise may occur.
• Near magnets or in magnetic fields.
• In extremely high or low temperature.
zAs the computer can become hot during operation, keep it away from items that are sensitive to heat.
This computer is designed to minimize shock to parts such as the hard disk drive, but no warranty is provided against
any trouble caused by shock. Be extremely careful when handling the computer.
zWhen carrying the computer:
• Turn off the computer.
• Remove all external devices, cables, cards and other protruding things.
• Do not drop or hit the computer against solid objects.
• Do not leave the display open.
• Do not grip the display part.
zWhen you board an airplane, take the computer with you and never put it in your
checked luggage. When using the computer on airplane, follow the airline’s instructions.
zWhen carrying a spare battery, put it in a plastic bag to protect its terminals.
zThis computer contains a magnet and magnetic products at the locations circled in the illustra-
tion at right. Avoid leaving metallic object or magnetic media in contact with these areas.
zThe touch pad is designed to be used with a finger tip. Do not place any object on its surface
and do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g.,
nails, pencils and ball point pens).
zAvoid any harmful substances such as oil from getting into the touch pad. The cursor may not
work correctly.
zIf the computer is being carried in a soft bag with the battery pack removed, avoid undue pressure on the body of the
computer in a crowded place, etc., as this may result in damage to the LCD.
When using peripheral devices
Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction
manuals of the peripheral devices.
zUse the peripheral devices conforming to the computer’s specifications.
zConnect to the connectors in the correct direction.
zIf it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of pins, etc.
zIf screws are included, fasten them securely.
Preventing your computer from unauthorized use via wireless LAN/Bluetooth
<Only for model with wireless LAN/Bluetooth>
zBefore using wireless LAN/Bluetooth, make the appropriate security settings such as data encryption.
Computrace®Software
Computrace®software tracks your stolen computer.
Perform the following steps before installing Computrace®software.
zComputrace®software is not included or installed in this computer.
CAUTION
zYou will be unable to set [Computrace (R) BIOS Module] to [Disable] once you have set to [Enable]. Do not change
the setting when not used.
• Even if you have set [Computrace (R) BIOS Module] to [Enable], this setting may return to [Disable] after repairs to
the motherboard, etc. have been made.
Operation Environment
Handling Cautions
CF-T5mk2_EN.book 17 ページ ２００７年１１月２８日 水曜日 午後１時１４分

18
Handling and Maintenance
Useful Information
NOTE
zConsult Absolute Software Corp. before disposal.
zRefer to the following URL for Computrace®software for installation and available service regions. Note that this
service is only available in certain regions.
http://www.absolute.com
1 Turn on or restart the computer, and press F2 while [Panasonic] boot screen is dis-
played.
The Setup Utility starts up.
zIf the password is requested, enter the Supervisor Password.
2 Select the [Security] menu, then select [Computrace (R) Sub-Menu] and press Enter .
3 Select [Computrace (R) BIOS Module], and set to [Enable].
4 At the confirmation message, select [Execute] and press Enter .
5 At the reconfirmation message, select [Execute] and press Enter .
6 Press F10 .
At the confirmation message, select [Yes] and press Enter .
The computer restarts.
To clean display (LCD)
Use the soft cloth included with the computer. (For more information, refer to “Suggestions About Cleaning the LCD
Surface” that comes with the soft cloth.)
To clean the touch pad
Wipe lightly with a gauze or other dry, soft cloth.
To clean areas other than the LCD panel and touch pad
Wet a soft cloth with water or a diluted kitchen cleanser (neutral), wring the cloth out thoroughly, and wipe the dirty area
gently. Using a detergent other than a neutral kitchen cleanser (e.g., a weak alkali cleanser) may adversely affect
painted surfaces
CAUTION
zDo not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc.
Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to
the surface.
zDo not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause
malfunction or damage.
Maintenance
CF-T5mk2_EN.book 18 ページ ２００７年１１月２８日 水曜日 午後１時１４分

19
Useful Information
Expanding Memory
Use RAM modules that comply with the specifications below. Using any other module may cause malfunction or result
in computer failure.
RAM module specifications:
DDR2 SDRAM, 172 pins, Micro DIMM, 1.8 V, PC2-4200
CAUTION
zUse recommended RAM module products. Do not use non-recommended RAM modules. Non-recommended RAM
modules may not operate properly, and may cause damage to your computer. Some non-recommended RAM mod-
ules may overheat, causing the cover to warp. Refer to various sources for recommended RAM module.
zRAM modules are extremely sensitive to static electricity. There are cases where static electricity generated by the
human body has adversely affected such RAM modules. When inserting or removing a RAM module, do not touch
the terminals or internal components, insert objects other than the module, or allow foreign particles to enter. Doing
so has been known to cause damage, fire or electric shock.
zMatsushita Electric Industrial Co., Ltd. will bear no responsibility whatsoever for failures or damage caused by the
use of non-recommended RAM modules, or by incorrect installation or removal of such RAM modules. Before
installing a RAM module, confirm the product type and the correct installation method.
Preparation
ATurn off your computer.
• Do not use the standby or hibernation.
BDisconnect the AC adaptor and remove the battery pack.
CRemove the screw (A) and the cover on the bottom of the computer.
• Use the appropriate screw driver so as not to strip the thread of screw.
1 Place the RAM module lightly in parallel with the RAM module slot so that the notch (B)
of the RAM module and the protrusion (C) of the RAM module slot is in the same direc-
tion.
zThe gold terminals are visible at this point.
zRAM module is at an angle of 20º -30ºwith the horizontal line.
2 Insert the RAM module parallel to the slot firmly until the
gold terminals are invisible.
zIf it is hard to insert the RAM module, do not try forcibly but check the
module’s direction.
Inserting the RAM Module
CF-T5mk2_EN.book 19 ページ ２００７年１１月２８日 水曜日 午後１時１４分

20
Expanding Memory
Useful Information
3 Press the RAM module down until the right and left hooks (D)
lock into place.
zWhen pressing down the module, the right and left hooks will open slightly and
will return after locking.
zIf it is hard to press down the RAM module, do not try forcibly but check the
module’s direction.
4 Set the cover and battery pack back.
NOTE
zIf the RAM module is recognized correctly, the total size of this computer’s memory and RAM module memory is dis-
played on the [Information] menu of the Setup Utility.
If the RAM module is not recognized, turn off the computer and insert it again.
1 Carefully open the left and right hooks (E).
The RAM module will be raised.
2 Carefully remove the RAM module from the slot.
3 Set the cover and battery pack back.
Removing the RAM Module
CF-T5mk2_EN.book 20 ページ ２００７年１１月２８日 水曜日 午後１時１４分