Panasonic TX-L32DT35E User manual

T
QB0E2153U1G
Operating Instructions
LCD Television
T hank you for purchasing this Panasonic product.
Please read these instructions carefully beforeoperating this productand retain
them for futurereference.
T he images shownin this manual arefor illustrativepurposes only.
Please refer to Pan European Guarantee Card if you need to contactyour local
Panasonic dealer for assistance.
English
M odel No.
TX-L32DT35E
TX-L37DT35E
Contents
Be Sure to Read
Safety Precautions······················································2
M aintenance································································3
Quick Start Guide
Accessories ···································································3
Identifying Controls···················································5
B asic Connection························································7
Auto Setup····································································9
U sing “VIERA Connect”···········································13
H ow to Use VIERA TOOLS······································13
V iewing 3D images··················································14
H ow to Use Menu Functions ································17
Specifications·····························································24
For more detailed instructions, refer to the Operating
Instructions on the CD-ROM.
To view the Operating Instructions on the CD-ROM, you
need a computer equipped with a CD-ROM drive, and
Adobe® Reader® (Version 8.0 or later is recommended)
installed on your computer.
D epending on the operating system or settingson your
computer, the Operating Instructions may not start
automatically.
I nthis case, open the PDF fileunder the “MANUAL” folder
manually to view the instructions.

Safety Precautions
2
Safety Precautions
Warning
Handling the mains plug and lead
•
I nsertthe mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.)
•
E nsurethat the mains plug is easily accessible.
•
D onot touchthe mains plug with awet hand.This may cause electrical shock.
•
D onot damagethe mains lead, damaged lead may cause fireor electrical shock.
• D onot movethe TV with the lead plugged into asocket outlet.
• D onot placeaheavy objecton the lead or placethe lead near ahightemperatureobject.
• D onot twist the lead, bend it excessively or stretchit.
• D onot pull on the lead.Hold onto the mains plug body when disconnecting the plug.
• D onot use adamaged mains plug or socket outlet.
• E nsurethe TV does not crush the mains lead.
If you find any
abnormality,
remove the mains plug
immediately!
AC 220-240 V
50 / 60 Hz
Power source / Installation
•
T his TV is designed for:
• AC 220-240 V, 50 /60 Hz
• T able-top use
Do not remove covers and
NEVER modify the TV yourself
•
H ighvoltagecomponents may cause seriouselectrical
shock, donot removethe rear cover as liveparts are
accessiblewhen it is removed.
•
T hereareno user serviceableparts inside.
•
H avethe TV checked, adjusted or repaired at your local
Panasonic dealer.
Do not expose the TV to direct sunlight and
other sources of heat
•
Avoid exposing the TV to directsunlight and other sources
of heat.
To prevent the spread
of fire, keep candles or
other open flames away
from this product at all
times
Do not expose to rain or
excessive moisture
•
T oprevent damagewhichmight resultin electric shock or
fire, donot expose this TV to rain or excessivemoisture.
•
T his TV must not be exposed to dripping or splashing
water and objects filled with liquid, suchas vases, must
not be placed on top of or abovethe TV.
Do not place foreign objects inside the TV
•
D onot allow any objects to drop into the TV throughthe
air vents as fireor electric shock may result.
Do not place the TV on sloped or unstable
surfaces, and ensure that the TV does not
hang over the edge of the base
•
T he TV may fall or tip over.
Use only original dedicated stand /
mounting equipment
•
U sing an unapproved stand or other fixtures may make
the TV unstable, risking injury.Besureto ask your local
Panasonic dealer to perform the setupor installation.
•
U se approved stands(p.4) /wall-hanging brackets.
Do not allow children to handle SD Card or
dangerous parts
•
A swith any small object, the SD Card could be swallowed
by young children. Please removeSD Card immediately
after use and storeoutof reachof children.
•
T his productcontains possibly dangerousparts that
can be breathed in or swallowed by young children
accidentally.Keep these parts outof reachof young
children.

Safety Precautions | Maintenance | Accessories
3
Caution
When cleaning the TV, remove the mains
plug
•
Cleaning an energized TV may cause electric shock.
Remove the mains plug from the wall socket
when the TV is not in use for a prolonged
period of time
•
T his TV will still consumesomepower even in the Off mode,
as long as the mains plug is still connected.
Do not expose your ears to excessive volume
from the headphones
•
Irreversibledamagecan be caused.
Do not apply strong force or impact to the
display panel
•
T his may cause damageresulting in injury.
Do not block the rear air vents
•
Adequate ventilation is essential to prevent failureof
electronic components.
•
V entilation should not be impeded by covering the
ventilation openingswith itemssuchas newspapers, table
cloths and curtains.
•
We recommend that agap of at least 10 cm is leftall
around this TV even when placed insideacabinet or
between shelves.
•
When using the stand, keep the spacebetween the
bottom of the TV and the surfacewherethe TV is set.
•
If stand is not used, ensurethe vents in the bottom of the
TV arenot blocked.
M inimum distance
10
10
10
10
(cm)
Maintenance
First, remove the mains plug from the socket outlet.
Display panel, Cabinet, Stand
Regular care :
G ently wipe the surfaceof the display panel, cabinet,
or stand by using asoftcloth to clean the dirtor
fingerprints.
For stubborn dirt :
D ampen asoftcloth with clean water or diluted neutral detergent
(1 partdetergent to 100 parts water).Then wring the cloth and
wipe the surface. Finally, wipe away all the moisture.
Caution
•
D onot use ahard cloth or rubthe surfacetoo hard.This may cause scratches on the surface.
•
T akecarenot to subjectthe TV’ssurfaces to water or detergent. A liquid insidethe TV could lead to productfailure.
•
T akecarenot to subjectthe surfaces to insectrepellent, solvent, thinner or other volatilesubstances. This may degrade
surfacequality or cause peeling of the paint.
•
T he surfaceof the display panel is specially treated and may be easily damaged.Takecarenot to tap or scratchthe surface
with your fingernail or other hard objects.
•
D onot allow the cabinet and stand to makecontactwith arubber or PVC substancefor along time. This may degrade
surfacequality.
Mains plug
Wipe the mains plug with adry cloth at regular intervals. Moistureand dust may lead to fireor electrical shock.
Accessories
Standard accessories
Remote Control Batteries for the
Remote Control (2)
•
R6
(p.5)
Stand
(p.4)
Operating Instructions
•
N2QAYB000572
Pan European Guarantee
Card
•
Accessories may not be placed all together.Takecarenot to throw them away unintentionally.
•
T his productcontains possibly dangerousparts (suchas plastic bags), that can be breathed in or swallowed by young
children accidentally.Keep these parts outof reachof young children.

Accessories
4
Attaching the stand
Warning
Do not disassemble or modify the stand.
•
O therwise the TV may fall over and becomedamaged, and personal injury may result.
Caution
Do not use any other TV and displays.
•
O therwise the TV may fall over and becomedamaged, and personal injury may result.
Do not use the stand if it becomes warped or physically damaged.
•
If you use the stand whileit is physically damaged, personal injury may result. Contactyour nearest Panasonic dealer
immediately.
During set-up, make sure that all screws are securely tightened.
•
If insufficient careis taken to ensurescrewsareproperly tightened during assembly, the stand will not be strong enoughto
supportthe TV, and it might fall over and becomedamaged, and personal injury may result.
Ensure that the TV does not fall over.
•
If the TV is knocked or children climbonto the stand with the TV installed, the TV may fall over and personal injury may result.
Two or more people are required to install and remove the TV.
•
If twoor morepeoplearenot present, the TV may be dropped, and personal injury may result.
Do not tilt the TV by placing
something between the stand
and the floor. TV may fall over and
become damaged, and personal
injury may result.
Stand is very heavy. Please
handle with both hands as
shown in image.
Assembly screw (4)
M4 × 30
Stand
•
TBL5ZX0173 (TX-L32DT35E)
•
TBL5ZX0172 (TX-L37DT35E)
Securing the TV
U se the assembly screwsto fasten securely.
•
M akesurethat the screwsaresecurely tightened.
•
C arry outthe work on ahorizontal and level surface.
•
D epending on the length of the screw driver you use, it is
difficultto tighten the twoscrewsat the bottom.Makesure
all screwsaresecurely tightened.
F oam mat or thick softcloth
B ack of the TV
To prevent from falling, please secure the TV to the wall by using strong string or wire.
•
Putthe strong string or wirethroughthe hole
on the bottom rear of the TV as shownin the
illustration.

Identifying Controls
EXIT
OPTION
TEXT
REC
PROGRAMME
STTL INDEX HOLD
BACK/
RETURN
ASPECT
INPUT
LAST VIEW
TV
G
U
I
D
E
V
I
E
R
A
T
O
O
L
S
V
I
E
R
A
L
i
n
k
DVD/VCR TV
AVTV
abc def
jkl ghi mno
tuvpqrs wxyz
DIRECT TV REC MENU
1 15
16
18
19
20
21
22
23
25
26
27
17
24
2
4
6
11
3
5
7
8
9
10
12
13
14
5
Identifying Controls
Remote Control
1 Standby On / Off switch
•
Switches TV Onor Off standby
2 3D button
•
Switches to the viewing mode
between 2D and 3D
3 [Main Menu]
•
Press to access Picture, Sound,
Timer and SetupMenus
4 Aspect
•
C hanges aspectratio
5 Information
•
D isplayschannel and
programmeinformation
6 VIERATOOLS
•
D isplayssomespecial feature
icons and accesses easily
7 [VIERA Link Menu]
8 OK
•
C onfirmsselections and choices
•
Press after selecting channel
positions to quickly change
channel
•
D isplaysthe Channel List
9 [Option Menu]
•
E asy optional setting for
viewing, sound, etc.
10 Teletext
•
Switches to teletextmode
11 Subtitles
•
D isplayssubtitles
12 Numeric buttons
•
C hanges channel and teletext
pages
•
Sets characters
•
When in Standby mode,
switches TV On(Press for about
1 second)
13 Sound Mute
•
Switches sound mute Onor Off
14 Volume Up / Down
15 Input mode selection
•
TV - switches DVB-S/DVB-C /DVB-T
/Analoguemode
•
AV - switches to AV inputmode
from InputSelection list
16 Direct TV Recording
•
R ecordsprogrammeimmediately in
DVD Recorder /VCR with Q-Link or
VIERA Link connection
17 [VIERA Connect]
•
D isplaysVIERAConnecthome
screen
18 Exit
•
R eturns to the normal viewing
screen
19 TV Guide
20 Cursor buttons
•
M akes selections and adjustments
21 Return
•
R eturns to the previousmenu /
page
22 Coloured buttons
(red-green-yellow-blue)
•
U sed for the selection, navigation
and operation of variousfunctions
23 Hold
•
Freeze/unfreezepicture
•
H oldsthe current teletextpage
(teletextmode)
24 Index
•
R eturns to the teletextindex page
(teletextmode)
25 Last view
•
Switches to previously viewed
channel or inputmode
26 Channel Up / Down
27 Connected equipment operations
■Installing / removing remote’s batteries
1
Pull open
H ook
Caution
•
I ncorrectinstallation may cause battery leakageand corrosion, resulting
in damageto the remote control.
•
D onot mix old and new batteries.
•
R eplaceonly with sameor equivalent type. Donot mix different battery
types (suchas alkaline and manganese batteries).
•
D onot use rechargeable(Ni-Cd) batteries.
•
D onot burnor break upbatteries.
•
D onot expose batteries to excessiveheat suchas sunshine, fireor the like.
•
M akesureyou dispose of batteries correctly.
•
E nsurebatteries arereplaced correctly, thereis danger of explosion and
fireif battery is reversed.
•
D onot disassembleor modify the remote control.
2
N ote the correct
polarity (+ or -)
Close

Identifying Controls
9 10 11
F
TV
AV
7
8
6
12
1
2
3
4
5
13
6
T V
1 CI slot
2 HDMI4 terminal
3 SD Card slot
4 USB 3 port
5 Headphones jack
6 Function select
•
[Volume] /[Contrast] /[Brightness] /[Colour] /
[Sharpness] /[Tint] (NTSC signal) /[Bass]∗/[Treble]∗/
[Balance] /[Auto Setup]
∗
[Music] or [Speech] modein the Sound Menu
7 C hannel Up/Down, Valuechange(when using the F
button), Switching the TV On(press either button for
about1 second when in Standby mode)
8 Changes the input mode
9 Remote control signal receiver
•
D onot placeany objects between the TV remote
control signal receiver and remote control.
10 C.A.T.S. (Contrast Automatic Tracking System)
sensor
•
Senses brightness to adjust picturequality when [Eco
Mode] in the PictureMenu is set to [On] (p.18)
11 Power and Timer LED
•
Red : Standby
Green : On
Orange : Timer Programming On
Orange (flash) :
R ecording of Timer Programming, DirectTV
Recording or One TouchRecording in progress
Red with orange flash :
Standby with Timer Programming On, DirectTV
Recording or One TouchRecording
•
T he LED blinkswhen the TV receives acommand
from the remote control.
12 Mains power On / Off switch
•
U se to switchthe mains power.
If you turned the TV Off during Standby modeby the
remote control last time, the TV will be in Standby
modewhen you turnthe TV Onwith Mains power On
/Off switch.
13 Infrared transmitter for 3D Eyewear
•
D onot placeany objects between the transmitter
and 3D Eyewear.
Using the On Screen Displays - Operation guide
M any features availableon this TV can be accessed via the OnScreen Display menu.
Operation guide
O peration guidewill helpyou to operate by using the
remote control.
Example:[Sound Menu]
Main Menu
Picture
Sound
Timer
Setup
1/2
0
0
0
0
11
M odeMusic
B ass
Treble
B alance
H eadphone Volume
Surround
Auto Gain Control
V olumeCorrection
Speaker Distanceto Wall
Off
Off
Over 30cm
Select
EXIT Selects the basic sound mode. P ageup
C hange
RETURN
P agedown
O peration guide
How to use remote control
MENU
O pen the main menu
M ovethe cursor /selectthe menu item /selectfrom a
rangeof options
M ovethe cursor /adjust levels/selectfrom arangeof
options
Access the menu /storesettingsafter adjustments have
been madeor options havebeen set
BACK/
RETURN
R eturnto the
previousmenu
EXIT
Exit the menu system
and returnto the normal
viewing screen
Auto power standby function
T he TV will automatically goto Standby modein the following conditions :
• no signal is received and no operation is performed for 30 minutes in AnalogueTV mode
• [Off Timer] is activein the Timer Menu (p.20)
• no operation is performed for the period selected in [Auto Standby] (p.20)
•
T his function does not affectthe recording of Timer Programming, DirectTV Recording and One TouchRecording.

Basic Connection
7
Basic Connection
External equipment and cables shownarenot supplied with this TV.
Please ensurethat the unit is disconnected from the mains socket beforeattaching or disconnecting any leads.
T herearesomerestrictions on placement for viewing 3D images. For details(p. 14, 16)
Example 1 Example 2
Connecting dish or aerial
Connecting DVD Recorder / VCR
and Player
TV only
T oensureyour satellite dish is correctly installed, please
consultyour local dealer.
•
Also please consultthe received satellite broadcasting
companies for details.
TV, DVD Recorder / VCR and Player
RF IN
RF OUT
R ear of the TV
Cable
Terrestrial aerial
AC 220-240 V
50/60 Hz
M ains lead
RF cable
RF cable
DVD Recorder or
VCR
Player /
3D-compatible player
Fully wired
SCART cable
Fully wired HDMI
compliant cable
■How to use the clamper
bundling the mains lead
To loosen :
k nob
K eep pushing the
knob
Bundle the cables
hooks
Set the tip in the
hooks
To remove from the TV:
K eep pushing both side
snaps
snaps
•
D onot bundlethe Satellite cable, RF cableand mains lead together (could cause distorted image).
•
F ix cables with clampersas necessary.
•
When using the optional accessory, follow the option’sassembly manual to fix cables.
•
F or digital cable, digital
terrestrial and analogue
broadcasts
R ear of the TV
Terrestrial aerial
AC 220-240 V
50/60 Hz
M ains lead
RF cable
•
F or digital satellite broadcasts
Satellite dish
Satellite cable
Cable

Basic Connection
8
Example 3
Connecting DVD Recorder / VCR and Set top box
TV, DVD Recorder / VCR and Set top box
RF IN
RF OUT
R ear of the TV Terrestrial aerial
M ains lead
AC 220-240 V
50/60 Hz
Fully wired HDMI
compliant cable
Fully wired
SCART cable
Fully wired
SCART cable
Set top box DVD Recorder or
VCR
RF cable
RF cable
Cable
■Connecting to the network environment (Network connections)
T oenablethe network servicefunctions (VIERA Connect, etc.), you need to connectthe TV to abroadband network
environment.
•
If you donot haveany broadband network services, please consultyour retailer for assistance.
•
C onnectwith LAN cable(Wired connection) or Wireless LAN Adaptor (Wireless connection).
•
Setupof the network connection will startafter the tuning (when first using the TV) (p. 10 - 12)
I nternet
environment
I nternet
environment
Wired connection
Wireless connection
Access point
LAN cable(Shielded)
•
U se the Shielded Twist Pair (STP) LAN cable.
Wireless LAN Adaptor and Extension cable
•
C onnectto the USB 1, 2 or 3 port.
R ear of the TV
Note
•
T owatch3D contents (p. 14)
•
C onnectto the TV’sAV1 for aDVD Recorder /VCR supporting Q-Link.
•
F or HDMI-compatibleequipment, possibleto connectto HDMI terminals(HDMI1 /HDMI2 /HDMI3 /HDMI4) by using HDMI
cable.
•
P l ease also read the manual of the equipment being connected.
•
K eep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.Otherwise,
distortion of image/sound may occur or operation of other equipment may be interfered.

Auto Setup
9
Auto Setup
Searchand storeTV channelsautomatically.
•
T hese steps arenot necessary if the setuphas been completed by your local dealer.
•
Please complete connections (p.7, 8) and settings(if necessary) of the connected equipment beforestarting Auto Setup. For
detailsof settingsfor the connected equipment, read the manual of the equipment.
1 Plug the TV into mains socket and switch On
•
T akes afew secondsto be displayed
•
If the red LED showson the TV, press the Standby On/Off switchon the remote
control for about1 second.
2 Select the language
Menüsprache
DeutschD anskPolskiSrpyski
E nglish Svenskač eština Hrvatski
Français N orsk MagyarSlovenščina
Italiano SuomiSlovenčina Latviešu
E spañol TürkçeБългарски eesti keel
P ortuguêsЕλληνικά RomânăLietuvių
N ederlands
select
set
3 Select your country
Country
G ermanyD enmark Poland
Austria Sweden Czech
FranceN orwayHungary
I taly FinlandSlovakia
Spain Luxembourg Slovenia
P ortugalBelgium Croatia
SwitzerlandNetherlandsE stonia
M alta TurkeyLithuania
A ndorraGreeceO thers
select
set
•
D epending on the country you select,
selectyour Region or storethe Child Lock-
PIN number (“0000” cannot be stored) by
following the on screen instructions.
4 Select the mode you want to tune
TV Signal Selection
DVB-C
DVB-S
DVB-T
Analogue
Start Auto Setup
tune /skip tuning
select
:tune (searchfor the availablechannels)
:skip tuning
5 Select [Start Auto Setup]
TV Signal Selection
DVB-C
DVB-S
DVB-T
Analogue
Start Auto Setup
access
select
•
Auto Setupwill startto searchfor TV channelsand storethem.
T he stored channelsand sorted channel order vary depending on the country, area,
broadcasting system and conditions of signal reception.
Auto Setup screen varies depending on the country you select.
1 DVB-S Search Mode 2 DVB-S Satellite Search
Search Mode
Free Channels
All Channels
0% 100%
Astra19.2°E
Hot Bird 13°E
Searching Satellite
Press EXIT to skip Satellite installation
Satellite
DVB-S Auto Setup
Satellite C hecking LNB2
Progress
T his will takeupto 40 minutes.
set
selectmode

Auto Setup
10
5 3 [DVB-S Auto Setup] 4 [DVB-C Network Settings]
0% 100%
Astra19.2° E
1
2
3
100
100
CBBC Channel
BBC Radio Wales
E4
100
Searching
DVB-S Auto Setup
Satellite
Progress
T his will takeabout30 minutes.
N o. C hannel NameType
Free TV
Free TV
Free TV
Quality
Free TV:3Pay TV:0Radio: 0
•
D epending on the country you select, selectyour cableprovider
beforehand by following the on screen instructions.
Frequency Auto
N etwork ID
StartAuto Setup
Auto
DVB-C Network Settings
access
select
[StartAuto Setup]
abc def
jkl ghi mno
tuvpqrs wxyz
N ormally set [Frequency] and [Network ID] to [Auto].
If [Auto] is not displayed or if necessary, enter [Frequency] and [Network
ID] specified by your cableprovider with numeric buttons.
5 [DVB-C Auto Setup] 6 [DVB-T Auto Setup]
0% 100%
1
2
3
100
100
CBBC Channel
BBC Radio Wales
E4
100
Searching
DVB-C Auto Setup
Progress
T his will takeabout3 minutes.
N o. C hannel NameType
Free TV
Free TV
Free TV
Quality
Free TV:3Pay TV:0Radio: 0
CH 5 69
62
62
62
100
100
CBBC Channel
BBC Radio Wales
E4
100
62 100Cartoon Nwk
Searching
CH Channel NameType
Free TV
Free TV
Free TV
Free TV
Quality
Free TV:4 P ay TV:0 R adio: 0
DVB-T Auto Setup
Progress
T his will takeabout3 minutes.
•
D epending on the country you select, the channel selection screen will
be displayed after DVB-T Auto Setupif multiplechannelshavethe same
logical channel number.Selectyour preferred channel or exit the screen
for automatic selections.
7 [Analogue Auto Setup] 8 Preset Download
CH 29
CH 33 BBC1
CH 2 78 41CC 1
Searching
CH Channel Name
A nalogue: 2
Analogue Auto Setup
Scan
T his will takeabout3 minutes.
If Q-Link, VIERALink or similar technology compatiblerecorder is
connected, channel, language, country /region settingsareautomatically
downloaded to the recorder.
0% 100%
Sending Preset Data
Please wait!
R emote control unavailable
•
I f d ownloading has failed, you can download later throughthe Setup
Menu.[Download] (p.21)
6 Setup the network connection
Setupthe network connection to enablethe network servicefunctions suchas VIERA Connect, etc.(p.13).
•
T osetupthe wireless connection, the Wireless LAN Adaptor (optional accessory) is required.
Please note that this TV does not supportwireless public access points.
•
E nsurethe network connections (p. 8) and network environment arecompleted beforestarting setup.
Select the network type
Network Setup
SelectWired or Wireless
WiredWireless Set later
[Wired] “Wired connection”(p. 8)
[Wireless] “Wireless connection”(p. 8)
access
select•
T osetuplater on or skip this step
Select[Set later] or
EXIT
■[Wired]
1 .Select[Auto]
C heck network cableconnection.
C heck acquired IP address.
C heck for devices using sameIP address.
C heck gateway connection.
C heck server connection.
Connection Test : succeeded
T he test is successful
and the TV is connected
to the network.
: failed
C heck the settingsand
connections. And then
select[Retry].
Acquire IP Address
Auto M anual
access
select
Automatically setupis done and the test of the network
connection starts.
•
T oset manually, select[Manual] and set eachitem.
2 .Goto the nextstep 7
(Press twice)

Auto Setup
11
6 ■[Wireless]
Select the connection type
Connection Type
Please selectnetwork connection type.
Searchfor access point
WPS(Push button)
access
select
[Search for access point]
Access points found automatically arelisted.
1 .Selectyour desired access point
1
2
3
Access Point A
SSID
Access Point B
Access Point C
11n(2.4GHz)
11n(5GHz)
11n(5GHz)
Available Access Points
N o. Wireless type E ncrypt R eception
access
select
:Encrypted access point
•
T osearchaccess points again
(yellow)
•
F or the information of the
highlighted access point
•
T oset manually
(red)
2 .Access the encryption key inputmode
SSID :Access Point A
Encryption Key Setting
C onnection will be madewith the following settings:-
Authentication type :WPA-PSK
E ncryption type :TKIP
Please inputthe encryption key.
E ncryption key
•
If the selected access point is not encrypted, the confirmation screen
will be displayed.Itis recommended to selectthe encrypted access
point.
3 .Enter the encryption key of the access point
A B C D E F G H I J K L M N O P Q R ST
U V WX Y Z 0 1 2 3 4 5 6 7 8 9 ! :#
a b c d ef g h i j k l m n o p q r s t
u v w x y z ( ) + - .* _
Access Point Settings
E ncryption key
Set characters Store
BACK/
RETURN
select
set
•
Y ou can set charactersby using numeric buttons.
4 .Select[Yes]
N o
Access Point Settings
E ncryption key is set to:-
XXXXXXXX
Select'Yes' to confirm.
Select'No' to change.
Y es
set
select
•
T ore-enter the encryption key, select[No].
•
If the connection has failed, check the encryption key, settings
and positions of your access point. And then, follow the on screen
instructions.
5 .After the access point setting is finished, perform the connection test
C heck access point connection.
C heck acquired IP address.
C heck for devices using sameIP address.
C heck gateway connection.
C heck server connection.
Connection Test : succeeded
T he test is successful and the TV is connected to the
network.
: failed
C heck the settingsand connections. And then select
[Retry].
•
T oset manually, select[Manual] and set eachitem.
6 .Goto the nextstep 7
(Press twice)

Auto Setup
12
6 [WPS(Push button)]
1 .Press the WPSbutton on the access point until the light flashes
2 .Connectthe Wireless LAN Adaptor and the access point
1) Please press the ‘WPS’ button on the access
point until its light ashes.
2) When the light is ashing select‘Connect’ on
TV.
If you areunsure, please check the instruction
manual of the access point.
WPS(Push button)
C onnect
•
E nsurethat your access point supports WPSfor this setup.
•
WPS:Wi-FiProtected Setup™
•
If the connection has failed, check the settingsand positions of your
access point. And then, follow the on screen instructions.
3 .After the access point setting is finished, perform the connection test
C heck access point connection.
C heck acquired IP address.
C heck for devices using sameIP address.
C heck gateway connection.
C heck server connection.
Connection Test : succeeded
T he test is successful and the TV is connected to the
network.
: failed
4 .Goto the nextstep 7 C heck the settingsand connections. And then select
[Retry].
•
T oset manually, select[Manual] and set eachitem.
(Press twice)
7 Select [Home]
Select[Home] viewing environment to use in your homeenvironment.
Please select your viewing environment.
H omeShop
set
select
■[Shop] viewing environment (for shop display only)
[ Shop] viewing environment is the demonstration modeto explain main features of this TV.
Select [Home] viewing environment to use in your home environment.
•
Y ou can returnto viewing environment selection screen at the stageof Shop confirmation screen and Automatic
DemoOff /Onselection screen.
1 Return to viewing environment selection
screen
2 Select [Home]
Please select your viewing environment.
H omeShop
set
select
Shop
Y ou haveselected shop mode
BACK/
RETURN
Automatic Demo
Off O n
T ochangeviewing environment later on, you will need to initialise all settingsby accessing Shipping Condition.
[Shipping Condition](p.23)
Auto Setup is now complete and your TV is ready for viewing.
If tuning has failed, check the connection of the satellite cable, RF cable, and then, follow the on screen instructions.
Note
•
T oretune all channels[Auto Setup](p.21, 22)
•
T oadd the availableTV modelater [Add TV Signal] (p.21, 22)
•
T oinitialise all settings[Shipping Condition](p.23)

Using“VIERA Connect” | How to Use VIERA TOOLS
13
Using“VIERA Connect”
VIERA Connectis agateway to the internet services uniqueto Panasonic and has expanded VIERA CAST features greatly.
VIERA Connectallowsyou to access somespecific websites supported by Panasonic, and enjoy internet contents suchas
photos, videos, games, etc.from VIERA Connecthomescreen.
•
T his TV has no full browser function and all features of websites may not be available.
1
Turn power on
•
Press for about1 second
•
M ains power On/Off switchshould be On. (p.6)
Every timeyou turnon the TV, VIERA Connectintroduction
banner appears. The banner is subjectto change.
E njoy selected internet content with VIERA Connect.
Simply press the OK /INTERNET button
2
Access VIERA Connect
Whilethe banner is displayed•
T he button designvaries
depending on the remote
control.
or
INTERNET
Example:
Welcome to VIERA Connect™
VIERA Connect™home screen is subject to change without notice.
The services through VIERA Connect™are operatedbytheirrespective serviceproviders,andservice may
be discontinuedeithertemporarilyorpermanentlywithout notice. Therefore,Panasonic will make no
warrantyforthe content orthe continuityofthe services.
All features ofwebsites orcontent ofthe service maynot be available.
Some content maybe inappropriate forsome viewers.
Some content mayonlybe available forspecic countries andmaybe presentedin specic languages.
ENTER
Don’t showthis message again
•
D epending on the usageconditions, it may takea
whileto read all the data.
•
M essages might be displayed beforeVIERAConnect
homescreen.
Please read these instructions carefully and follow the
on screen instructions.
Example:VIERAConnecthomescreen
MORE
BACK
•
T ogoto the nextlevel
[MORE]
•
T oback to the previouslevel
[BACK]
■To exit from
VIERA Connect
EXIT
•
T oset the VIERA
Connectinstruction
banner display off
[VIERA Connect
Banner] (p. 23)
How to Use VIERA TOOLS
Y ou can access somespecial features easily by using the VIERATOOLSfunction.
1 Display icons of the feature
V
I
E
R
A
T
O
O
L
S
2 Select a feature
VIERA Link Control
access
select
3 Follow the operations of each feature
■To return to TV
EXIT
or
V
I
E
R
A
T
O
O
L
S

Viewing 3D images
14
Viewing 3D images
Y ou can enjoy viewing 3D images with contents or programmes corresponding to the 3D effectby wearing the 3D Eyewear.
T his TV supports [FrameSequential]∗1, [Sideby Side]∗2and [Top and Bottom]∗33D formats.
∗ 1 :The 3D format that the images for the leftand right eyes arerecorded with the highdefinition quality and alternately
played back
∗ 2, ∗3 :Other available3D formats
•
H ow to view the 3D images (p.15)
Caution
To enjoy 3D images safely and comfortably, please read these instructions fully.
Viewing 3D Content
•
D onot use the 3D Eyewear if you haveahistory of over-
sensitivity to light, heartproblems, or haveany other
existing medical conditions.
•
Please stop using the 3D Eyewear immediately, if you
feel tired, arenot feeling well or experienceany other
uncomfortablesensation.
•
When you set the effectby using [3D Adjustment], take
into account that the vision of 3D images varies among
different individuals.
•
T akean appropriate break after viewing a3D movie.
•
T akeabreak of between 30 - 60 minutes after viewing
3D content on interactivedevices suchas 3D games or
computers.
•
B ecareful not to strikethe TV screen or other people
unintentionally.When using the 3D Eyewear the distance
between the user and screen can be misjudged.
•
T he 3D Eyewear must only be wornwhen viewing 3D
content.
•
If you donot look toward the TV screen for awhilewhen
viewing 3D images, the 3D Eyewear may be turned off
automatically.
•
If you suffer from any eyesight problems(short/
far-sighted, astigmatism, eyesight differences in leftand
right), please ensureto correctyour vision beforeusing the
3D Eyewear.
•
Stop using the 3D Eyewear if you can clearly see double
images when viewing 3D content.
•
D onot use the 3D Eyewear at adistanceless than the
recommended distance.
T he recommended viewing distanceis at least 3 times of
imageheight.
TX-L32DT35E :1.2 m or more
TX-L37DT35E :1.4 m or more
When the top and bottom area of the screen is blackened,
suchas movies, view the screen at adistanceat least 3
times further than the height of the actual image. (That
makes the distancecloser than aboverecommended
figure.)
3D Eyewear Use
•
P ay special attention when children areusing the 3D
Eyewear.
3D Eyewear should not be used by children younger than
about5 - 6 yearsold, as aguideline. All children must be
fully supervised by parents or guardians who must ensure
their safety and health throughoutthe using 3D Eyewear.
•
B eforeusing the 3D Eyewear, ensureno breakableobjects
surrounding the user to avoid any accidental damageor
injury.
•
R emovethe 3D Eyewear beforemoving around to avoid
falling or accidental injury.
•
Alwaysstorethe 3D Eyewear in the case supplied with the
3D Eyewear when not in use.
•
U se the 3D Eyewear only for the intended purpose and
nothing else.
•
D onot use 3D Eyewear in the condition of high
temperature.
•
D onot use if the 3D Eyewear is physically damaged.
•
D onot use any devices that emit the infrared signalsnear
the 3D Eyewear, as this may cause the 3D Eyewear false
operations.
•
D onot use devices (suchas mobilephones or personal
transceivers) that emit strong electromagnetic waves
near the 3D Eyewear as this may cause the 3D Eyewear to
malfunction.
•
D onot expose the infra-red receiver section to bright light
suchas directsunshine and fluorescent light. The 3D image
may not be displayed correctly.
•
Stop using the 3D Eyewear immediately if amalfunction or
faultoccurs.
•
Stop using the 3D Eyewear immediately if you experience
any redness, pain, or skin irritation around the nose or
temples.
•
I nrarecases, the materialsused in the 3D Eyewear may
cause an allergic reaction.

Viewing 3D images
15
To view the 3D images
Y ou can enjoy the 3D images in avariety of ways.
(FrameSequential, Sideby Sideand Top and Bottom arethe supported 3D format.)
■Playing back 3D-compatible Blu-ray disc (Frame Sequential format)
•
C onnectthe 3D-compatibleplayer via afully wired HDMI compliant cable.
•
If inputmodeis not switched automatically, selectthe inputmodeconnected to the player.
•
If you use the non 3D-compatibleplayer, the images will be displayed on 2D mode.
■3D-supported broadcast
•
Please consultthe suppliersof contents or programmes for availability of this service.
■3D photos and 3D videos taken by 3D-compatible Panasonic products
•
Availablein Media Player and Network services
■2D images converted to 3D
U se a2D-to-3D conversion function [2D 3D] modein [3D ModeSelection]
1 Turn the 3D Eyewear on
2 Put on the 3D Eyewear
3 Watch the 3D images
•
Safety precautions will be displayed when you first watchthe 3D image. Select[Yes] or [No] to continueto view 3D
images.
If you select[Yes], this messagewill be displayed again in the samecondition after Mains power On/Off switchis
nextturned On. Select[No] if you donot wish to display this messageagain.
4 Turn off the 3D Eyewear after using it
Note
•
3D Eyewear is not included.Please purchase as necessary.
•
F or moredetail aboutusing and wearing the 3D Eyewear, please refer to the manual of the 3D Eyewear.
Changing 2D - 3D mode
Y ou can easily changethe viewing modebetween 2D and 3D using the 3D button.
Selectthe mode
2D
3D
3D
2D
3D Mode Selection
set
select•
I temsof [3D ModeSelection] vary
depending on the condition.
[3D] / [2D] / [2D 3D] :
D isplaysthe appropriate imagethat you desirewithoutselecting 3D format
•
T his modemay not work properly depending on the sourceimageformat. Inthis case, selectthe appropriate 3D format
manually.
■To change 3D format manually
When the imageis not changed properly using [3D], [2D] or [2D 3D] mode, use this manual setting.
During the aboveoperation Selectthe mode
(red)
2D 3D
3D Mode Selection (Manual)
T op and Bottom - 2D
T op and Bottom - 3D
Sideby Side- 2D
Sideby Side- 3D
FrameSequential - 2D
FrameSequential - 3D
Original
set
select

Viewing 3D images
16
Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format
If the pictureappearsto be abnormal, refer to the tablebelow to choose the correct3D mode.
[3D Mode Selection]
Source image
format
[Original]
[Frame
Sequential
- 3D]
[Side by Side
- 3D]
[Top and
Bottom - 3D] [2D 3D]
Frame Sequential
N ormal 3D∗1
Side by Side (Full)
N ormal 3D∗1
Side by Side
N ormal 3D∗1
Top and Bottom
N ormal 3D∗1
Normal format (2D)
N ormal 3D
∗ 1 :When selecting [FrameSequential - 2D], [Sideby Side- 2D] or [Top and Bottom - 2D], the images will be displayed without
3D effect.
•
D epending on the player or broadcasts, the imagemay be different from the aboveillustrations.
Available range for the 3D Eyewear
If the 3D Eyewear is placed outsidethe coveragearea for about5 minutes, the 3D Eyewear will be turned off automatically.
:Coveragearea for using the 3D Eyewear
35°35°
View from the top
A pprox.
3 .2 m
A pprox.
3 .2 m A pprox.
3 .2 m
View from the side
20°
20°
A pprox.3.2 m
Note
•
Y ou cannot view the 3D images with the 3D Eyewear too far from the TV, because of the difficulty of receiving infrared signals
from the TV.
•
T he rangemay be shortened depending on the obstacles between the infrared sensorson the TV and the 3D Eyewear, the
dirton the infrared sensorsor the surrounding environment.
•
If you donot look toward the TV screen for awhilewhen viewing 3D images, the 3D Eyewear may be turned off automatically
even if in the coveragearea.

How to Use Menu Functions
17
How to Use Menu Functions
V ariousmenusallow you to makesettingsfor the picture, sound, and other functions.
1 Display the menu
MENU
•
D isplaysthe functions that can be set (varies according to the inputsignal)
2 Select the menu
Example:[PictureMenu]
Main Menu
Picture
Sound
Timer
Setup
access
select
3 Select the item
Example:[PictureMenu]
1/2
60
30
5
0
0
V iewing ModeDynamic
C ontrast
Brightness
C olour
Sharpness
T int
C olour Balance
V ivid Colour
EcoModeOff
Off
Warm
access
select
■Choose from among alternatives
C olour BalanceN ormal
C ool
Warm store
select
■Adjust using the slide bar
5
Sharpness
M oved
store
change
■Go to the next screen
C hild Lock Access
D isplaysthe nextscreen access
■Enter characters by free input menu
Y ou can enter names or numbersfreely for someitems.
A B C D E F G H I J K L M N O P Q R ST
U V WX Y Z 0 1 2 3 4 5 6 7 8 9 ! :#
a b c d ef g h i j k l m n o p q r s t
u v w x y z ( ) + - .* _
User input
N ame
Set charactersone by one Store
BACK/
RETURN
select
set
•
Y ou can set charactersby using numeric buttons.
■To reset the settings
•
T oreset the picturesettingsonly
[Reset to Defaults] in the Picture Menu (p.19)
•
T oreset the sound settingsonly
[Reset to Defaults] in the Sound Menu (p.20)
•
T oinitialise all settings
[Shipping Condition] in the Setup Menu (p.23)
■To return to TV at any
time
EXIT
■To return to the
previous screen
BACK/
RETURN
■To change menu
pages
u p
d own

How to Use Menu Functions
18
Menu list
Menu Item Adjustments / Configurations (alternatives)
Picture
Viewing Mode
B asic picturemode
[Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Game] / [Photo] / [Professional1]
/ [Professional2]
I neachViewing Modeand input, [Contrast], [Brightness], [Colour], [Sharpness], [Tint],
[Colour Balance], [Vivid Colour], [EcoMode], [P-NR] and [3D-COMB] can be adjusted
and stored to suit your particular viewing requirement.
[Dynamic] :
Provides enhanced picturecontrast and sharpness when viewing in abright room.
[Normal] :
R ecommended for viewing under normal ambient room lighting conditions.
[Cinema] :
F or watching movies in adarkened room with the improved performanceof contrast,
black and colour reproduction
[True Cinema] :
Precisely reproduces the original quality of the imagewithoutany revision.
[Game] :
F ast response signal specifically to providesuitableimages for playing games
[Photo] :
Set [Reversal Film Effect] to [On] to providethe suitableimagequality for photos
[Professional1 / 2]:
Allowsyou to set the professional picturesettingsin [Advanced Settings], [Lock
Settings] and [Copy Adjustment]
Contrast, Brightness,
Colour, Sharpness
I ncreases or decreases the levelsof these options according to your personal
preference
Tint With an NTSC signal sourceconnected to the TV, the picturehuecan be adjusted to
suit your taste
Colour Balance Allowsyou to set the overall colour tone of the picture[Cool] / [Normal] / [Warm]
Vivid Colour Automatically adjusts coloursto vivid ones [Off] / [On]
Reversal Film Effect Provides the pictureeffectsuchas the reversal film [Off] / [On]
Eco Mode
Automatic Brightness Control function
Adjusts picturesettingsautomatically dependent on ambient lighting conditions
[Off] / [On]
P-NR
P ictureNoise Reduction
Automatically reduces unwanted picturenoise and flicker noise in the contoured parts
of apicture[Off] / [Min] / [Mid] / [Max]
3D-COMB M akes still or slow moving pictures look morevivid [Off] / [On]
3D Settings
2D 3D Depth Selects alevel of 3D-imagedepth for viewing converted 2D images
[Min] / [Mid] / [Max]
3D Adjustment Adjustment of the 3D effect(except in [2D 3D] mode) [Off] / [On]
[Effect] : Adjust the 3D depth according to the contents or to your preference.
Picture Sequence Select[Reverse] if you feel that the sense of depth is unusual (except in [2D 3D]
mode) [Normal] / [Reverse]
Edge Smoother Set to [On] if you feel the contoured parts of an imagearenot smooth enough(except
in [2D 3D] mode) [Off] / [On]
3D Detection
Automatically detects the 3D format signals[Off] / [On] / [On (Advance)]
[On (Advance)] : Detects the 3D format signalsand displaysthe 3D image
automatically.
[On] : Detects the particular 3D format signals(FrameSequential, etc.) and displaysthe
3D imageautomatically.

How to Use Menu Functions
19
Picture
3D Settings
3D Signal Message Selects whether to giveanotification messagewhen asignal of 3D format is found
[Off] / [On]
Safety Precautions D isplaysthe precautions for viewing 3D images
Screen Display Turns the screen off when you select[Off]
[Off] / [On]
Area Dimmer Control Automatically controlsdark areas according to the images [Off] / [On]
Advanced Settings
Intelligent Frame
Creation
Automatically compensates the pictureframerate and removes juddering movements
to makethe images smooth [Off] / [Mid] / [Max]
24p Smooth Film Automatically compensates the pictureframerate to makethe 24psourcemovie
images smooth [Off] / [Mid] / [Max]
Film Cadence
Detection Automatically makes the film sourcemovie images clear [Off] / [On]
3D Refresh Rate
R educes juddering and flicker noises of the 3D images when using the 3D Eyewear
[Auto] / [100Hz] / [120Hz]
[100Hz] :
If the room is lit by fluorescent lights /dimmers(50 Hz) and light appearsto flicker.
[120Hz] :
If the inputsignal is 50 Hz and flicker noises appear.
Resolution Enhancer E nhances the pictureresolution to makethe imagesharper [Off] / [Mid] / [Max]
16:9 Overscan
Selects the screen area displaying the image[Off] / [On]
[On] :
E nlarged the imageto hidethe edgeof the image.
[Off] :
D isplayed the imagein the original size.
AV Colour System Selects optional colour system based on video signalsin AV mode
[Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC]
DVI Input Setting C hanges the black level in the imagefor HDMI inputmodewith DVI inputsignal
manually [Normal] / [Full]
Reset to Defaults Press the OK button to reset the present PictureViewing Modeof the selected inputto
the defaultsettings
Sound
Mode
Selects the basic sound mode[Music] / [Speech] / [User]
[Music] :
Improves sound quality for watching music videos, etc.
[Speech] :
Improves sound quality for watching news, drama, etc.
[User] :
Adjusts the soundsmanually by using the equaliser to suit your favourite sound
quality.
Bass I ncreases or decreases level to enhanceor minimise lower, deeper sound output
Treble I ncreases or decreases level to enhanceor minimise sharper, higher sound output
Equaliser Adjusts the frequency level to suit your favourite sound quality
Balance Adjusts volumelevel of right and leftspeakers
Headphone Volume Adjusts the volumeof the headphones

How to Use Menu Functions
20
Sound
Surround
Surround sound settings[Off] / [V-Audio] / [V-Audio Surround] / [V-Audio
ProSurround]
[V-Audio] :
Provides adynamic enhancer of width to simulate improved spatial effects
[V-Audio Surround] :
Provides adynamic enhancer of width and depth to simulate improved spatial effects
[V-Audio ProSurround] :
Provides amoreprogressiveenhancer and reverberation to simulate improved spatial
effects
Auto Gain Control Adjusts the current volumelevel if it is extremely different from the previousviewed
channel or inputmode[Off] / [On]
Volume Correction Adjusts the volumeof individual channel or inputmode
Speaker Distance to Wall Adjusts the low frequency sound [Over 30cm] / [Up to 30cm]
MPX
Selects multiplex sound mode(if available)
[Stereo] : Use this normally
[Mono] : When stereo signal cannot be received
[M1] /[M2] : Availablewhilemono signal is transmitted
Audio Preference
Selects the initial setting for audio tracks[Auto] / [Multichannel] / [Stereo] / [MPEG]
[Auto] : Automatically selects the audio tracksif programmehas morethan twotracks.
The priority is given in the following order - Dolby Digital Plus, HE-AAC, Dolby
Digital, MPEG.
[Multichannel] : T he priority is given to multi-channel audio track.
[Stereo] : T he priority is given to stereo (2ch) audio track.
[MPEG] : T he priority is given to MPEG.
SPDIF Selection
SPDIF :A standard audio transfer fileformat
Selects the initial setting for digital audio outputsignal from DIGITAL AUDIO OUT and
HDMI2 (ARC function) terminals[Auto] / [PCM]
[Auto] : D olby Digital Plus, Dolby Digital and HE-AAC (48 kHz) multi-channel areoutput
as Dolby Digital Bitstream.
MPEG is outputas PCM.
[PCM] : Digital outputsignal is fixed to PCM.
HDMI1 / 2 / 3 / 4 Input
Selectto fit the inputsignal [Digital] / [Analogue]
[Digital] : HDMI cableconnection
[Analogue] : HDMI-DVI adaptor cableconnection
SPDIF Delay Adjusts the delay timeof the sound outputfrom DIGITAL AUDIO OUT and HDMI2 (ARC
function) terminalsif the sound does not synchronizethe image
Reset to Defaults Press the OK button to reset the present Sound Mode, [Balance], [Headphone Volume]
and [Surround] to the defaultsettings
Timer
Timer Programming Sets atimer to remind watching or record forthcoming programmes
Off Timer Sets the timeuntil the TV automatically goes to Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)
Auto Standby Sets the timethe TV automatically goes to Standby modewhen no operation is
performed for the selected times [Off] / [2] / [4] (hours)
Setup
Eco Navigation Automatically sets the TV to the most suitableenergy-saving mode
Recording Setup F ormats the connected USB HDD and sets the condition
Link Settings
VIERA Link Sets to use VIERA Link functions [Off] / [On]
HDMI Content Type Adjusts the picturesettingsaccording to the content type signal from the connected
equipment via HDMI cable[Off] / [Auto]
AV1 out C hooses the signal to be transmitted from the TV to Q-Link [TV] / [AV2] / [Monitor]
[Monitor] : Imagedisplayed on screen