LG 37LD650H User manual

www.lg.com
OWNER’S MANUAL
LED LCD TV/LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
ENGLISH

HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or regis-
tered trademarks of HDMI Licensing LLC.
Separate purchase
Wall Mounting Bracket
(32LD6***, 32LV3***)
LSW100B or
LSW100BG
(37/42/47LD6***, 37LV3***) (42/47LV3***)
LSW200B or
LSW200BG
LSW400B or
LSW400BG

I
CONTENTS
CONTENTS
PREPARATION
LCD TV Models : 32/37/42/47LD6***.............. A-1
LED LCD TV Models : 32/37/42/47LV3***....A-13
EXTERNAL EQUIPMENT SETUP
Antenna Connection............................................1
Connecting with a Component cable..................2
Connecting with an HDMI cable .........................3
Connecting with an HDMI to DVI cable ..............4
Connecting with a Euro Scart cable ...................5
Usb setup ............................................................6
Connecting with AN RF Cable ............................6
Connecting with a D-sub 15 pin cable................7
Speaker output Setup .........................................7
Insertion of A CI Module......................................8
Headphone Setup ...............................................8
Digital audio out Setup........................................9
Supported Display Resolution...........................10
Screen Setup for PC mode...............................12
Network setup ...................................................16
WATCHING TV / PROGRAMME CONTROL
Turning on the TV .............................................17
Initializing Setup ...............................................17
Programme Selection........................................17
Volume Adjustment ...........................................17
Quick Menu .......................................................18
On Screen Menus Selection and adjustment...19
Auto programme tuning ...................................21
Manual programme Tuning...............................22
Programme Edit ...............................................26
Booster ..............................................................28
CI [Common Interface] Information...................29
Selecting the Programme List...........................30
Input List............................................................31
Input Label ........................................................32
Data Service......................................................33
SIMPLINK..........................................................34
AV Mode............................................................38
Initializing(Reset to original factory settings) ....39
TO USE A USB DEVICE
When connecting a USB device .......................40
Movie list ...........................................................42
Photo list............................................................53
Music list............................................................63
Extra Contents ..................................................72
DivX Registration Code.....................................73
Deactivation.......................................................74
EPG(ELECTRONIC PROGRAMME
GUIDE)(IN DIGITAL MODE)
Switch on/off EPG.............................................76
Select a programme..........................................76
Button Function in NOW/NEXT Guide Mode ...76
Button Function in 8 Day Guide Mode .............77
Button Function in Date Change Mode ............78
Button Function in Extended Description Box ..78
PICTURE CONTROL
Picture Size (Aspect Ratio) Control ..................79
Picture Wizard...................................................81
Energy Saving...................................................82
Preset Picture Settings .....................................83
Manual Picture Adjustment ...............................84
Picture Improvement Technology......................86
Expert Picture Control.......................................87
Picture Reset.....................................................90
Trumotion ..........................................................91
Demo Mode.......................................................92
Power Indicator .................................................93

II
CONTENTS
CONTENTS
SOUND & LANGUAGE CONTROL
Auto Volume Leveler.........................................94
Clear Voice II.....................................................95
Preset Sound Settings-Sound Mode ................96
Sound Setting Adjustment -User Mode ............97
Infinite Sound ....................................................97
Balance .............................................................98
DTV Audio Setting (in digital mode only)..........99
Selecting Digital Audio out ..............................100
Audio Reset.....................................................101
Audio Description (In digital mode only).........102
I/II
Stereo/Dual Reception (In Analogue Mode Only)..103
NICAM Reception (In Analogue Mode Only)..104
Speaker Sound Output Selection ...................104
On-Screen Menu Language / Country Selection.. 105
Language Selection ........................................106
TIME SETTING
Clock Setup.....................................................108
Auto on/off time setting ...................................109
Sleep Timer setting .........................................110
Alarm setting ................................................... 111
PARENTAL CONTROL / RATINGS
Set Password & Lock System.........................112
Block Programme............................................113
Parental Control (In Digital Mode only)...........114
External Input Blocking ...................................115
Key Lock..........................................................116
TELETEXT
Switch on/off ...................................................117
SIMPLE Text....................................................117
TOP Text..........................................................118
FASTEXT ........................................................118
Special Teletext Functions ..............................119
DIGITAL TELETEXT
Teletext within Digital Service .........................120
Teletext in Digital Service................................120
APPENDIX
Troubleshooting...............................................121
Maintenance....................................................123
Product Specifications ...................................124
IR Codes .........................................................128
External Control Device Setup........................129
Open source software notice ..........................136

A-1
PREPARATION
LCD TV MODELS : 32/37/42/47LD6***
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
■Image shown may differ from your TV.
Owner’s Manual Batteries
(AAA)
Remote Control
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any stains
or fingerprints on the
surface of the TV with
the polishing cloth.
Do not use excessive
force. This may cause
scratching or discoloura-
tion.
AV MODE INPUT
ENERGY
SAVING
EXIT
OK
BACK
PORTAL
Q.MENU
1
.,;@
2
abc
3
def
4
ghi
5
jkl
6
mno
7
pqrs
8
tuv
0
[
9
wxyz
LIST
Q.VIEW
GUIDE
AD ALARM
INFO
MARK
RATIO
MUTE
DELETE
CHAR/NUM
P
TV/
RAD
P
A
G
E
MENU
Ferrite Core
( This item is not included
for all models. )
Install the power plug closely.
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Power Cord
Protection cover
Bolts for stand assembly
(M4x20)
x 8
Protective Bracket and
Bolt for Power Cord
(This feature is not
available for all models.)
1-screw for stand fixing Cable HolderPlug in type Holder
PREPARATION
Only 32/37/42LD6***

A-2
PREPARATION
PREPARATION
FRONT PANEL CONTROLS
■Image shown may differ from your TV.
NOTE
►TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of
brightness of the picture is reduced, and this will reduce the overall running cost.
CAUTION
►Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall.
►Do not drag the TV. The floor or the product may be damaged.
SPEAKER
Power/Standby Indicator
(Can be adjusted using the Power
Indicator in the OPTION menu.)
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER

A-3
PREPARATION
CABLE MANAGEMENT
AC IN
1
2
HDMI/DVI IN
(RGB)
LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
CABLE MANAGEMENT
AC IN
1
2
HDMI/DVI IN
(RGB)
LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
14
CABLE MANAGEMENT
AC IN
1
2
HDMI/DVI IN
(RGB)
LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
811
7
1
9 10
ANTENNA IN
12
BACK PANEL INFORMATION
32/37/42LD6***
■Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(► p.124 to 127) Never attempt to operate
the TV on DC power.
Antenna Input
Connect antenna or cable to this jack.
LAN
Network connection.
Also used for video, photo and music files on
a local network.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
Component Input
Connect a component video/audio device to
these jacks.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
SPEAKER OUTPUT(STEREO)
The phone socket for external speaker is on
this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
8
9
10
11
12
13
14
7
243 56
13

A-4
PREPARATION
PREPARATION
CABLE MANAGEMENT
AC IN
1
2
HDMI/DVI IN
(RGB)
LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
CABLE MANAGEMENT
AC IN
1
2
HDMI/DVI IN
(RGB)
LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
15
CABLE MANAGEMENT
AC IN
1
2
HDMI/DVI IN
(RGB)
LAN
AUX LAN
USB IN
H/P
SPEAKER
OUT
VOLUME CONTROL
STEREO (8 )
ANTENNA
IN
811
7
1
9 10
13
47LD6***
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(► p.124 to 127) Never attempt to operate
the TV on DC power.
LAN
Network connection.
Also used for video, photo and music files on
a local network.
AUX LAN
Network connection.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
Component Input
Connect a component video/audio device to
these jacks.
Euro Scart Socket (AV1)
Connect scart socket input or output from an
external device to these jacks.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
SPEAKER OUTPUT(STEREO)
The phone socket for external speaker is on
this jack.
Antenna Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD
SLOT.
(This feature is not available in all countries.)
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
8
9
10
11
12
13
14
15
7
12
4
356
14
2

A-5
PREPARATION
STAND INSTALLATION
Fix the 4 bolts securely using the holes in
the back of the TV.
■Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened.
(If not tightened fully, the product can tilt forward after the product installation.)
If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening
part of the bolt.
4
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
Assemble the TV as shown.
1
3
Assemble the parts of the Stand Body with
the Stand Base of the TV.
2
Stand Body
Stand Base
Tighten the stand with the
four screws (provided as
parts of the TV).
x 4
M4 X 20

A-6
PREPARATION
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
■Image shown may differ from your TV.
1Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
Secure the power cable with the Protective
Bracket/Bolt or the Plug in type Holder. It
will help prevent the power cable from being
removed by accident.
AC IN
AC IN
AC IN
AC IN
AC IN
Protective Bracket/Bolt
(This feature is not available
for all models.)
Plug in type Holder
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
or
AC IN
AC IN
AC IN
AC IN
AC IN
Install the Cable Management Clip as shown.
If your TV has the Cable Holder, install it as
shown and bundle the cables.
Cable Management Clip
AC IN
AC IN
AC IN
AC IN
AC IN
Cable Holder
2
Put the cables inside the Cable
Management Clip and snap it closed.
3
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
►Do not hold the Cable Management Clip when moving the TV.
- If the TV is dropped, you may be injured or the product may be broken.
►With some TVs, the Plug in type Holder and the Cable Holder are included. If these holders
are inserted into the hole provided on back of the TV, they cannot be removed.
NOTE
32/37/42LD6***
1Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
Secure the power cable with the Protective
Bracket/Bolt. It will help prevent the power
cable from being removed by accident.
AC IN
AC IN
AC IN
AC IN
AC IN
Protective Bracket/Bolt
(This feature is not available
for all models.)
AC IN
AC IN
AC IN
AC IN
AC IN
Put the cables inside the Cable
Management Clip and snap it closed.
2
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
47LD6***