Panasonic TH-24L400H User manual

Operating Instructions
TH-24L400H
TH-32L400H
72-32L40H-E69Z3
English
(image: TH-32L400H)

2
Contents
Safety Precautions··································3
Setting Up the TV····································5
Connecting the TV ··································6
Initial Setup·········································· 8
Operating the TV··································· 9
Watching External Inputs ······················· 10
Using Media Player ······························· 11
Using the Menu Functions ····················· 13
Additional Information··························· 16
Troubleshooting ··································· 17
Maintenance········································· 18
Specifications······································· 19
Notice for Digital terrestrial broadcasting
functions
TH-32L400H

Safety Precautions
3
Safety Precautions
■Mains plug and lead
Warning
Note
■Take care
Warning
Warning
100-240 V,

Safety Precautions
4
To prevent the
spread of fire, keep
candles or other
open flames away
from this product at
all times
■Suffocation / Choking Hazard
Warning
■Display
Caution
■Pedestal
Warning
Caution
■Ventilation
Caution
10 10 10
10
■Moving the TV
Caution
■When not in use for a long time
Caution
■Use conditions
Caution
■Battery for the Remote Control
Caution
Note
TV stand is for explanation only, not match with
actual design.

●
(ST3 x 12) x 4
●
inch model Pedestal
●
(ST4 x 15) x 4
●
inch model
24-
32- Pedestal
Setting Up the TV
5
Setting Up the TV
Supplied accessories
Operating Instructions
Remote Control
(p. 9)
Batteries (AAA) × 2
(p. 5)
Pedestal
(p. 5)
Note
Preparation
RC200PS002
Attaching the pedestal
Inserting remote’s batteries
1 Lay the TV on a foam mat or thick soft cloth on a
table.
2 Remove the assembly screws from the TV.
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
Removing the pedestal from the TV
Pull out the base from the TV.
3
CH

a
b
Setting Up the TV | Connecting the TV
6
Wall mounting the TV (optional)
●When optional accessories such as wall brackets etc.
are used, always read and follow the manufacturer
installation and usage instructions.
●Do not mount the unit directly below ceiling lights
(such as spotlights or halogen lights) which typically
give off high heat. Doing so may warp or damage
plastic cabinet parts.
●When installing wall brackets you must ensure the
wall bracket is not electrically grounded to metal wall
studs. Always ensure that there are no electrical
cables, pipes etc. in the wall before you begin the
wall bracket installation.
●To prevent fall and injury, remove the TV from its
fixed wall position when it is no longer in use.
Warning
Please contact your local Panasonic dealer to purchase the
recommended wall-hanging bracket.
Rear of the TV
of
(View from the side)
■
Holes for wall-hanging bracket installation
■
Model ab
32-inch 100 mm 100 mm
24-inch 100 mm 100 mm
Model Type
32-inch M4 6 mm 10 mm
24-inch M4 6 mm 10 mm
Depth of screw
Minimum Maximum
Depth
screw
Screw for fixing the TV onto the
wall-hanging bracket(not supplied)
Connecting the TV
●Please ensure the TV is disconnected from the
mains socket/ power point before attaching or
disconnecting any RF/ AV leads.
●External equipment and cables are for illustrative
purposes only and not supplied with this TV.
●Check the type of terminals and cable plugs are
correct when connecting.
●When using an HDMI cable, use the fully wired one.
●Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared
sensor. Otherwise, distortion of image/ sound may
occur or operation of other equipment may be
interfered.
●Also read the manual of the equipment being
connected.
Terminals
Rear of the TV
ANT
1
2
3
4
6
5
VIDEO OUT
VIDEO OUT
(Only output analog TV & AV signal)
HDMI 1 (ARC)
HDMI 2

HDMI 2HDMI 2 HDMI 1
(ARC)
HDMI 2 HDMI 2
7
Ω
Connecting the TV
Use HDMI 2 to connect to an extension with ARC(Audio
return channel) capability the sound.
Enjoy the sound of external devices in multichannel sound
(e.g. Dolby digital) 5.1CH), connect the device to the
loudspeaker. For connections, see the device and the
instructions for the loudspeaker.

Initial Setup
8
UHF DS-35 85% (DTV)
DTV + ATV
ATV ：5 Program(s)
DTV ：2 Program(s)
Radio ：0 Program(s)
MENU
Exit
RETURN
Skip
3
4
AC100 - 240 V,
50 / 60 Hz
OK
OK
Installation Guide
OSD Labguage
Tune Type
View Environment
English
DTV+ATV
Home
RETURN
Exit
OK
Enter
Select Tune Type.
14
Reset

9
(Only available in ATV or DTV mode)
Operating the TV
操作電視機
使用遙控器
Input
Menu
[ ]: Switches TV On or Off (Standby)
Sound Mute On / Off
Numeric buttons
●Changes channel.
Displays [Input Selection] to seect the
input mode.
Setting off time
Cursor buttons
Displays Information banner
Volume Up / Down
EPG
Go straight to TV guide
(Only available in DTV)
Sound
Picture
Recurrent select different picture modes
Recurrent select different sound modes
Return to last watched channel
Return
Displays [Main Menu]
OK
●Confirms selections.
●Press after selecting channel positions to quickly
change channel.
●Displays the [Channel List].
Returns to the previous menu / page
Return
TV
Switches to TV input mode. (DTV or ATV).
Channel Up / Down
Subtitle
Enter the sound mode menu
(Only available in DTV or USB mode)
Enter the subtitle mode menu
(Only available in DTV or USB mode)
Lang
Programme Guide
Only available in DTV.
Channel List
Press the “EPG” key of the remote control to enter the
TV guide.
Press “G” to make an appointment to watch the program
once a day or once a week.
Press “Y” to view the programme information of the
previous day (limited to one week).
Press “B” to view the programme information of the
following day (limited to one week).
Reservation list: Under the electronic Program Guide
screen, press the “EPG” key to enter the reservation list.
Press “R” to delete a scheduled program.
Press “Y” to add scheduled programs.
Press “B” to edit a scheduled program.
In DTV or ATV mode, press OK to display the channel
list, then press the up and down key to select the channel,
and press OK to enter.
The channel list can only be displayed in DTV or ATV mode.
CH
11
10
12
15
1

10
Operating the TV
Indicators on the TV
2 3
1
INPUT
Operating the TV | Watching External Inputs
Input source
DTV
AV
ATV
USB
7
Power off
Input source
Long press display input source option, and then
long press to release the button switch input mode.
When the virtual button appears, press the button
briefly to switch the button key functions.
When the virtual button is present, press the button
long enough (for more than 1 second), can perform
the following functions.
The TV is off, short press the button to turn on the
power.
The TV is on, short press the button, the virtual
button will display as shown below.
Volume increase
Volume reduction
Previous channel
Next channel