Panasonic TH-43D310Q User manual

LED Television
Model No. TH-43D310Q
5M53A
Chassis
1

CA UT ION : TO RE DUCE THE RIS K OF
ELECTR ICA L SHOCK, DO NOT RE MOVE
COVER (OR BACK). NO USER SERVICEABLE
PAR TS INSIDE . RE FE R SER VIC ING TO
QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, with an equilateral triangle is intended to
alert the user to the presence of uninsulated voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
the person.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
Use of controls, adjustments or procedures other than those specified herein may result in
hazardous radiation exposure.
CAU T ION
RISK OF ELECTRI C
SHOCK DO NOT OPEN.
2
dangerous
WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SCHNEIDER ELECTRONICS GMBH-GERMANY
1. CAUTION
2

1. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
2. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
3. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to
traffic or abuse. This may result in a shock or fire hazard.
4. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
5. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.
6. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet
and refer servicing to qualified service personnel.
7. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
8. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.
9. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury
to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the
manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and
should use a mounting kit approved by the manufacturer.
10.2. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
CAUTION:
Read all of these instructions. Save these instructions for later use. Follow all Warnings and
Instructions marked on the audio equipment.
1. Read Instructions-All the safety and operatinginstructionsshouldbe read before the productis operated.
2. Retain Instructions- The safety and operating instructions should be retained for future reference.
3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions- All operating and use instructions should be followed.
3
SCHNEIDER ELECTRONICS GMBH-GERMANY
IMPORTANT SAFETY INSTRUCTIONS
FOR YOUR PERSONAL SAFETY
3

11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, etc.
Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall
outlet and refer servicing to qualified service personnel.
12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.
13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.
14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to
protect it from overheating. These openings must not be blocked or covered.
Never cover the slots or openings with cloth or other material.
Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc.
Never place the set near or over a radiator or heat register.
Never place the set in enclosure, unless proper ventilation is provided.
15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No.
70-1975, provides information with respect to proper grounding of the mast and supportingstructure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
to grounding electrode, and requirements for the grounding electrode.
15.2. Note to CATV system installer : (Only for the television set with CATV reception)
This reminder is provided to callthe CATV systemattention to Article820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
16. An outsideantenna systemshouldnot be located in thevicinity of overhead powerlines or other electric lights or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning
and power-line surges.
ANTENNA
LEAD- IN WIRE
ANTENNA DISCHARGE
UNIT(NECSECTION
810-20)
GROUNDING
CONDUCTORS
(NECSECTION810-21)
GROUND CLAMPS
POWERSERVICEGROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMP
NEC-NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNAGROUNDING AS PER
NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS
a built-in
installer s
4
SCHNEIDER ELECTRONICS GMBH-GERMANY
PROTECTION AND LOCATION OF YOUR SET
PROTECTION AND LOCATION OF YOUR SET
4

18. This television set should be operated only from the type of power source indicated on the marking label.If you are not
sure of the type of power supply at your home, consult your television dealer or local power company. For television
sets designed to operate from battery power, refer to the operating instructions.
19. If the television set does not operate normally by following the operating instructions, unplug this television set from the
walloutletandrefer servicingto qualified servicepersonnel.Adjustonlythose controls that are covered in theoperating
instructions as improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the television set to normal operation.
20. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on
a holiday, turn the television set and unplug the television set from the wall outlet.
21. If you areunable to restorenormaloperationby followingthedetailedprocedurein youroperatinginstructions,
do not attempt any further adjustment. Unplug the set and call your dealer or service technician.
22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for
service, unplug the set and have it checked by a professional service technician.
23. It is normal for some TV sets to make occasionalsnapping or poppingsounds, particularly whenbeing
turned on or off. If thesnapping or popping is continuous or frequent,unplugthesetandconsult your
dealer or service technician.
24. Do not use attachments not recommendedby the television set manufacturer as they may cause hazards.
25.Whenreplacementparts arerequired,be suretheservicetechnicianhasusedreplacementpartsspecified
by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
26.Uponcompletion of anyservice or repairs to thetelevisionset,asktheservicetechnician to perform
routine safety checks to determine that the television is in safe operating condition.
off
5
SCHNEIDER ELECTRONICS GMBH-GERMANY
OPERATION OF YOUR SET
IF THE SET DOES NOT OPERATE PROPERLY
FOR SERVICE AND MODIFICATION
5

PRODUCT SPECIFICATIONS LED TV
ID
CATEGORY: 43" LED TV HD
MODEL NO: TH-43D310Q
REFERENCE MODEL (PANASONIC/COMPETITION): TH-43D310Q Panasonic
:
ASSEMBLER South Africa
ID PHOTO REMOTE: Add Picture CHASSIS / Main Board:5M53A
PARAMETERS SPECIFICATIONS REMARKS (IF ANY)
GENERAL ITEMS
OSD LANGUAGES ENGLISH
MANUAL LANGUAGES ENGLISH
SUPPLY TYPE CKD/ SKD / CBU
DESTINATION South Africa
FC COLOUR Black
TUNNING
NUMBER OF PROGRAMS 200
COLOUR SYSTEM PAL/NTSC
SOUND SYSTEM BG / I / DK / M
PICTURE
RESOLUTION 1920x1080(FHD)
ASPECT RATIO 4:3/16:9/Zoom1/Zoom2/Just Scan
DNR (Noise Reduction) YES
BACKLIGHT ADJUST YES
AUDIO
AUDIO OUTPUT POWER (RMS)
8W+8W(Typ.)
SPEAKER TYPE intergrated speakers(6Ohm)
FEATURES
HOTEL MODE YES
PANASONIC LOGO
YES
CEC YES
ARC
YES
DIGITAL DOLBY NO
ANY OTHER (PLEASE SPECIFY) SPDIF OUT(COAXIAL)
CONNECTIVITY
RF IN YES
DTV IN NO
AV1 IN YES
AV2 IN NO
VIDEO OUT NO
DVD COMPATIBILITY (YPbPr/YCbCr) NO
USB INPUT (2.0 SUPPORT) 1
HDMI INPUT 2 (HDMI1.4)
EARPHONE OUT 1
PC AUDIO IN YES
PC(VGA IN) YES
MHL NO
ANY OTHER (PLEASE SPECIFY) SPDIF OUT(COAXIAL)
MULTIMEDIA SUPPORT
USB DEVICE SUPPORT FAT16, FAT32, NTFS(Read only)
DO NOT SUPPORT NTFS COMPRESSD FILE
PICTURE FORMAT JPEG, BMP,PNG
AUDIO FORMAT MP3，WMA
VIDEO FORMAT Mpeg1/2,H.264,VC1,HEVC,Mpeg4
PANEL SPECIFICATIONS
PANEL MODEL NO. AND TYPE
7626-T4300L-Y750(O/C: LGD/LC430DUJ-SHA1)
SCREEN SIZE & TYPE 42.5”
ASPECT RATIO
16:09
RESOLUTION 1920(H) x1080 (V)
DISPLAY AREA(H x V)
1079.87 mm diagonal
PIXEL PITCH 0.4902 mm x 0.4902 mm
DISPLAY COLOURS
16.7M
CONTRAST RATIO 1000:1(Typ.)
MAX BRIGHTNESS 250(min.)
VIEWING ANGLE (HORIZONTAL / VERTICAL) 176°(H)/176°(V)((Min.)
WEIGHT AND DIMN.
NET WEIGHT WITH PEDESTAL 9.1kg
NET WEIGHT W/O PEDESTAL 8.9kg
NET DIMENSIONS WITH PEDESTAL 976.7*228.3.3*619.6 mm
NET DIMENSIONS W/O PEDESTAL 976.7*94.5*571.6 mm
GROSS DIMENSIONS (PACKING BOX) 1060*153*650 mm
GROSS WEIGHT (WITH PACKING BOX) 11.5kg
RATING
OPERATING VOLTAGE 110V-240V~ at 50/60Hz
POWER CONSUMPTION 100W
STD BY POWER CONSUMPTION <0.5 W
ACCESSORIES
REMOTE 53HD-260401-W000
BATTERY 2 "AA" Batteries
POWER CORD TYPE DETACHABLE
POWER CORD UL94V -0
POWER PLUG SABS
ANY OTHER (PLEASE SPECIFY)
REGULATION
BIS No
CB YES
EER YES
EMC YES
BEE No
ANY OTHER (PLEASE SPECIFY) No
PERSON IN CHARGE
ODM PROMOTION
QA
S & M
6

Factory OSD Manual
1 TO ENTER FACTORY MAIN MENU
1.1 Press AV button and follow with key 3,1,9,5 one by one.
1.2 Factory main menu is as following:
2 ADC ADJUST
2.1 Press ▲/▼ button, choose ADC ADJUST and press OK button to enter.
Before adjusting, enter the channel you want to adjust and input adjust signal (YPBPR channel:
576P and 720P with 100% color bar; VGA channel: 1366*768 with tessellated white and black ).
Select ADC Tune, press ► button to auto adjust the ADC value.
7

100% color bar
tessellated white and black
Note: 1、The YPBPR and PC’s Auto White Balance adjust (AUTO ADC) must be done on the
product line.
2、In YPBPR channel ,must adjust the SD and HD two modes.
3 White balance
Select White balance, go to the “Source” item to select the channel which you want to adjust then
select TEMPERATURE (Medium, Warm, Cool). Then press ▼button to go to the items you want
to adjust:
R-GAIN
G-GAIN
B-GAIN
R-OFFSET
G-OFFSET
B-OFFSET
8

Press◄/► buttons can adjust the value to the best effect.
COPY ALL : Copy the values to all source!
4 Panel Control
No adjust.
5 SPECIAL SET
FAC. HOTKEY
Press◄/► button to switch factory hotkey on or off. For shipping condition, this item should be
off.
OUT FAC SOUND SYS
No adjust.
WHITE PATTERN
No adjust. For shipping condition, this item should be off.
2HOUR OFF
No adjust. For shipping condition, this item should be off.
BLUE SCREEN
No adjust.
Factory Reset
Choose and enter 8899 to execute factory reset.
DLC
No adjust.
WHITE BLACK STRENTH
No adjust.
power
Press◄/► button to switch AC power on status. Last is power on memorized, Force Standby is
power on standby, Force On is power on always.
OUT FACTORY SET
Press ► button to reset system to shipping condition.
AGING MODE
Press◄/► button to switch aging mode on or off. When aging mode is on, press EXIT button to
exit this mode.
CHANNEL RESET
Press ► button to load channel preset for factory test.
4 LANGUAGE SETTING
No adjust.
5 SOURCE SETTING
No adjust.
6 NONLINEAR
MODE
Choose source.
Brightness Curve
Adjust the Brightness Curve.
Contrast Curve
Adjust the Contrast Curve.
Saturation Curve
9

Adjust the Saturation Curve.
Hue Curve
Adjust the Hue Curve.
Sharpness Curve
Adjust the Sharpness Curve.
Volume Curve
Adjust the Volume Curve.
7 HOTEL FUNCTION
No adjust.
8 Other
SSC
Press OK to set the appropriate EMC values.
UART DEBUG
Press ► button to set UART DEBUG status. HK for debug, None to turn off debug status.
VIF1
No adjust.
POWER ON LOGO
When hotel mode is on, this item will be available. Select to turn on or turn off power on logo.
Spdif Audio Delay
No adjust.
SET LOGO MSTLOGO.JPG
No adjust.
BACK DATA TO USB
No adjust.
LOAD DATA FROM USB
No adjust.
Country Code
No adjust.
OSD Language
No adjust.
INIT_ADC_WHITE
Press ► button to load default white balance data.
Stick Demo
No adjust.
INIT LANGUAGE SETTING
No adjust.
Mirror Enable
Press◄/► button to switch mirror function on or off.
Channel Info Save
Press◄/► button to save current channel table to USB.
Channel info Update
Press◄/► button to load channel table from USB.
SW&DB update
No adjust.
10

8 Software Update(USB)
Press OK button to update software from USB.
9 Info
Press OK button to show software information.
END.
V56 Software Upgrade Instruction
Upgrade bin file
The file name of the upgrade bin is ‘merge.bin’ for USB upgrade.
USB upgrade procedures for TV set
1. Copy the software to the root directory of a USB memory stick. Plug the memory stick to
USB port of target TV set.
2. Select ‘Software Update(USB)’ on OSD and press OK button to start software update. TV
will reboot automatically when upgrade finishes.
3. If the process stop at 19% and TV reboot, it means the software of both TV set and USB
memory stick is the same.
11

ISP Software Upgrade
1 Hardware tools
1.1 USB cable
1.2 USB to serial port tool [driver need to be installed before this tool works:
FTC100103(MSTAR)(XP)]
1.3 4PIN to VGA convert cable
2 Connect
Connection is shown below:
12

3 Driver and Upgrading applications
FTC100103(MSTAR) and MSTAR ISP Utility tool.
3.1 Installing driver.
A dialog window will pop up when the upgrade tool is connected to computer through usb cable.
Choose“Install from a list or specific location (Advanced)”and click“Next”，another dialog
window shows：
Tick “√”before“Include this location in the search:”. Then click browse to point to
the software folder“FTC100103(MSTAR)”。
13

Click “Next”to start installing, there may be a warning as below during this process.
In the end a dialog window as below will show up, click “Finish” to finish.
14

Note: there is three drive to install, so these steps should be repeated for three times. Just
follow the messages of the computer, the upgrade tool will not work until the three drives are
installed.
3.2 Run ISP tool to upgrade software
3.2.1 Run a Mstar ISP tool such as ‘ISP_Tool_473.exe’.
3.2.2 Check if USB tool is connected with PC in Config page. Set the parameters as below: ISP
Slave Address: 0x92, Serial Debug Slave Address: 0xB2.
3.2.3 Click Auto to switch to program page. Then click Connect to enter ISP mode. If connected
successfully, it will show ‘Device Type’ as the picture below.
15

If connect failed, it will show ‘Can’t Find the Device Type !!’.
Note: If it fail to connect, please check:
1, whether power is on.
2, whether the driver is installed successfully and the option Use USB in Config page is available.
3, whether the cable connection is correct.
3.2.4 Switch to Read page. Click Read and load the upgrade ‘bin’ file.
3.2.5 Switch back to Auto page, click ‘Run’ to start upgrading.
16

When it finishes, it looks like
A Pass in green will show.
It is not recommended to upgrade software by ISP tool because HDCP key will be erased. In this
case, HDCP key need to be re-programmed.
3.2.6 HDCP key re-program
Follow step 3.2.1 to 3.2.4, switch to HDCP page, load the key file and make settings as following
picture.
17

Switch back to Auto page, make settings as following picture. Partial Erase address must be set to
0x003B0000.
18

When it finishes, it looks like
A Pass in green will show.
Hotel Mode
Enter Hotel Mode: MENU+7906.
Enter Hotel Mode state:
19

Hotel Mode
Press◄/► button to turn on or turn off hotel mode.
Initial INPUT
Press◄/► button to switch power on source.
Initial POS
Only available when Initial INPUT switch to ATV. Press◄/► button to set power on TV channel.
Initial VOL Level
Press◄/► button to set power on volume.
Maximum VOL Level
Press◄/► button to set maximum volume user can adjust.
Button Lock
Press◄/► button to lock or unlock panel buttons.
Remote Lock
Press◄/► button to lock or unlock remote control. When on, only hotel mode is available
(MENU+7906).
Auto Power On
Press◄/► button to set power on status. Last is power on memorized, Off is power on standby,
On is power on always.
Input Select Mode
Press OK to enter Input Select Mode. User can turn on or turn off input source in input menu.
Data Copy To USB
Press OK to copy current TV data to USB.
Data Copy From USB
Press OK to copy TV data from USB which has been previously copied.
20