Panasonic VIERA TC-P50GT30 User manual

Panasonic
Model No.
NOmero de modelo
TC-P50GT30
TC=P55GT30
Thank you for purchasing this Panasonic product,
Please read these instructions before operating your set and retain them for future
reference. The images shown in this manual are for illustrative purposes only.
Gracias per su decision de comprar este producto marca Panasonic.
Lea estas instrucciones antes de utilizar su televisor y guardelas para consultarlas en
el futuro. Las imageries mostradas en este manual tienen solamente fines ilustrativos. TQB2AA0606

Experience
multi ia an amazing level of excitement
[] Do not display a still picture for a long time
This causes the image to remain on the plasma screen
("image retention"). This isnot considered a malfunction and is not covered by the warranty.
To prevent the "Image retention", the screen saver is
automatically activated after a few minutes if no signals are
sent or no operations are performed.
Typical still images
e Channel number and other Iogos
e Image displayed in 4:3 mode
e SD Card photo @Video game @Computer image
[] Set up
¢ Do not place the unit where it's exposed to sunlight or other bright light (including reflections).
e Use of some types of fluorescent lighting may reduce the remote control's transmission range.
2

VIi L.i k"VlERAL,nk'°,satrademarkof
Panasonic Corporation.
I-I ITIII HDMI, the HDM] logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks
of HDMI Licensing LLC in the United
States and other countries.
SDXC Logo is a trademark of SD-
3C, LLC.
"AVCHD" and the "AVCHD" logo
are trademarks of Panasonic
Corporation and Sony Corporation.
"ReaID 3D" is a trademark of RealD.
This product is covered by U.S.
Patent 5,193,000 until August 28,
2011.
Od!Tn,DLNA _"_,the DLNA Logo and DLNA
CERTIFIED TM are trademarks,
service marks, or certification
marks of the Digital Living Network
Alliance.
QuickTime and the QuickTime
logo are trademarks or registered
trademarks of Apple inc., used
under license therefrom.
This product qualifies for ENERGY
STAR in the "Home Use" setting
and this is the setting in which
energy savings will be achieved.
Any modifications to the "Home
Use" setting or other factory default
settings could result in greater
energy consumption beyond
levels that meet ENERGY STAR
qualifications.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
HDAVl Control TM is a trademark of Panasonic Corporation.
Skype TM is a trademark of Skype limited.
IMAOEVIEWER
This product is licensed under the AVC patent portfolio
license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the AVC
Standard ("AVC Video") and/or (ii) decode AVC Video
that was encoded by a consumer engaged in a personal
and non-commercial activity and/or was obtained from a
video provider licensed to provide AVC Video. No license
is granted or shall be implied for any other use. Additional
information may be obtained from MPEG LA, LLC.
See http://www, mpegla.com.
Please read before using the unit
® Safety Precautions .......................................... 4
Getting started
• Accesser eslOptional Accessories..:.i:;::::::.i:i: 8
® Connectionsr:::.::...::,-:....,:.,:..,. .......... -,:,,"," 11
• dent fy ng Contro s :::::::::::::::::::::::::::: :;.i:.i:.; 14
® First Time Setup i.i..::.:i.i:....::.i::.:::i.::..:ii:::::.: i5
Basic Features
® Watching TV ................................................. 19
_ Using VIERATOOLS .................................... 22
® Watching content from external devices ....... 23
_ Viewing 3D images on TV ............................ 24
® Using Media player ....................................... 26
Advanced Features
_, VIERA Link TM"HDAVI ControF M''.................... 32
_ Using Network services ................................ 38
Network Connections .................................. 39
Network settings ......................................... 40
VIERA Connect (Enjoy Internet Service)....43
Using DLNA feature .................................... 44
Network Camera ......................................... 45
_, Editing and Setting Channels ....................... 46
_ How to Use Menu Functions ......................... 48
Picture settings ........................................... 49
Audio settings ............................................. 51
Timer settings ............................................. 51
Lock ............................................................ 52
Closed caption ............................................ 52
Setup .......................................................... 53
Support Information
® Ratings List for parental control .................... 54
® Technical information .................................... 55
® Care and Cleaning ........................................ 59
® Frequently Asked Questions (FAQ) .............. 60
® Specifications ................................................ 63
® index ............................................................. 65
® Limited Warranty
(for U.S.A. and Puerto Rico only) ................. 66
® Customer Services Directory
(for U.S.A. and Puerto Rico) ......................... 67
® Limited Warranty (for Canada) ..................... 68
3

Safety Precau ions
CAUTION
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a risk
of electric shock to persons.
,_ The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are in
the papers with the appliance.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 ) Only use attachments /accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart /apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15) To prevent electric shock, ensure the grounding pin on the
AC cord power plug is securely connected.
Small parts can present choking hazard if accidentally
swallowed.
Keep small parts away from young children.
Discard unneeded small parts and other objects,
including packaging materials and plastic bags/sheets to
prevent them from being played with by young children,
creating the potential risk of suffocation.
[] Set up
This Plasma TV may fall and can cause personal injury or
even death if not installed correctly. To prevent personal
injury or death, follow these warnings:
®Install the Plasma TV in accordance with the
manufacturer's recommended pedestal or stand,
corresponding hardware and installation instructions.
This Plasma TV is for use only with the following
optional accessories. Use with any other type of optional
accessories may cause instability. The following accessories
are manufactured by Panasonic Corporation.
• Wall-hanging bracket (Angled)
TY-WK4PI RW(TC-P50GT3O)
TY-WK5PI RW(TC-P55GT30)
® Be sure to ask a qualified technician to carry out the
installation and set-up.
Two or more people are required to install or remove the
television.
® Some wall mounts (wall-hanging brackets) are not
designed to be mounted to walls with steel studs or old
cinder block constructions.
Ask your dealer or licensed contractor to properly secure
the wall-hanging bracket.
® Do not route the TV's power cord inside the wall.
The power cord was not designed for in-wall mounting.
Doing so can lead to fire hazard.
® Do not place the Plasma TV or its stand on a sloped or
unstable surface.
The Plasma TV may fall or tip over.
® Do not support the Plasma TV on a non-specified
pedestal.
® Do not place the Plasma TV on furniture that can easily
be used as steps, such as a chest of drawers.
® Do not climb or allow children to climb on the Plasma TV
®Place or install the Plasma TV where it cannot be
pushed, pulled over or knocked down.
®Route al! cords and cables such that they cannot be
tripped over or pulled by curious children.
4

® Do not place any objects on top of the Plasma TV.
If water spills onto the Plasma TV or foreign objects get
inside it, a short-circuit may occur which could result in
fire or electric shock. If any foreign objects get inside the
Plasma TV, please consult an Authorized Service Center.
In the unlikely event that you receive a shock from this
product it is possible that your household outlet may be
wired improperly. Have an electrician verify that the TV's
outlet is properly wired. If the symptom persists, have the
TV serviced by a qualified authorized technician.
@To prevent the spread of fire, keep candles
or other open flames away from this
product at all times
[] AC Power Supply Cord
To prevent fire or electric shock:
®The Plasma TV is designed to operate on a 120 VAC,
60 Hz service. Insert the power cord plug as far as it will
go into the wall socket.
If the plug is not fully inserted, heat may generate, which
could cause a fire.
®The included power cord is for use with this unit only.
® Do not use any power cord other than that provided
with this TV.
® Do not handle the power cord plug with wet hands.
® Do not do anything that might damage the power
supply cord.
® When disconnecting the power supply cord, hold the
plug, not the cord.
® Do not use the power supply cord if the plug or cord is
damaged.
Replace the cord or contact your Authorized Service Center.
® Do not use a 3-prong to 2-prong AC plug adapters to
connect your TV's plug to the wall outlet.
Doing so will defeat the TV plug's safety feature, which
can lead to a shock hazard. If the wall outlet does not
accommodate a 3-prong plug, have a qualified electrician
replace your outlet and check the associated wiring.
[] Handling the power supply cord
® Insert the power plug fully into the socket outlet. (If the
power plug is loose, it could generate heat and cause fire.)
®Ensure that the power plug is easily accessible.
®Ensure the earth pin on the power plug is securely
connected to prevent electrical shock.
• An apparatus with CLASS I construction shall be
connected to a power socket outlet with a protective
earthing connection.
®Do not touch the power plug with a wet hand. (This may
cause electrical shock.)
® Do not use any power cord other than that provided
with this TV. (This may cause fire or electrical shock.)
® Do not damage the power cord. (A damaged cord may
cause fire or electrical shock.)
• Do net move the TV with the cord plugged in the socket outlet.
• Do not place a heavy object on the cord or place the cord
near a high-temperature object.
• Do not twist the cord, bend it excessively, or stretch it.
• Do not pull on the cord. Hold onto the power plug body
when disconnecting cord.
• Do not use a damaged power plug or socket outlet.
@If a problem occurs (such as no picture or no sound),
or if smoke or an abnormal odor is detected from the
Plasma TV, unplug the power supply cord immediately.
Continued use of the TV under these conditions might
cause a fire or permanent damage to the TV. Have the TV
evaluated by an Authorized Service Center. Servicing of the
TV by unauthorized personnel is strongly discouraged due
to its high voltage.
If water or an object gets inside the Plasma TV, if the
Plasma TV is dropped, or if the enclosure becomes
damaged, unplug the power supply cord immediately.
A short-circuit may occur, which could cause a fire. Contact
an Authorized Service Center for an evaluation.
[_ CAUTION
® Do not cover the ventilation holes.
Doing so may cause the Plasma TV to overheat, which can
cause a fire or damage to the Plasma TV.
® Leave a space of 3 15/16" (10 cm) or more at the top,
left and right, and 2 3/4" (7 cm) or more at the rear.
®When using the pedestal, keep the space between the
bottom of the TV and the pedestal or stand surface
clear from objects that may obstruct ventilation.
[]When Moving the Plasma TV
® Be sure to disconnect all cables before moving the
Plasma TV.
Moving the TV with its cables attached might damage the
cables which, in turn, can cause fire or electric shock.
®To prevent an electric shock, disconnect the power
plug from the wall outlet as a safety precaution before
carrying out any cleaning.
®Transport only in upright position.
Transporting the unit with its display panel facing upright or
downward may cause damage to the internal circuitry.
® Using a dry cloth, clean any dust from the power supply
cord and plug regularly.
Build-up of dust on the power cord plug can increase
humidity, which might damage the insulation and cause a
fire.
This Plasma TV radiates infrared rays;
therefore, it may affect other infrared communication
equipment. Install your infrared sensor in a place away from
direct or reflected light from your Plasma TV.
The TV will still consume some power as long as the
power supply cord is connected to the wall outlet.
®Display panel is made of glass. Do not apply strong
force or impact to the display panel.
This may cause damage resulting in injury.
® The TV is heavy. TV should be handled by 2 or more
people, Support as shown to avoid injury by the TV
tipping or falling.
5

//_ WARNING
ImAbout Prevention of Accidental Ingestion
®Do not store batteries, the band accessory or nose
pads in places where small children can reach.
There is a danger small children could swallow such parts
by mistake.
• If a child accidentally swallows such parts, seek
immediate medical attention.
mAbout Prohibition of Disassembly
® Do not disassemble or modify the 3D Eyewear.
mAhout lithium battery
® Batteries must not be exposed to excessive heat such
as sunshine, fire or the like.
IZLc o,,o.1
mAbout 3D Eyewear
® Do not drop, exert pressure on, or step on the 3D
Eyewear.
Doing so may damage the glass section, which may result
in injury.
• Always store the 3D Eyewear in the case provided when
not in use.
® Be careful of the tips of the frame when putting on the
3D Eyewear.
Accidentally inserting the tip of the frame into the eye may
cause injury.
®Be careful not to trap a finger in the hinge section of the
3D Eyewear.
Doing so may result in injury.
• Pay special attention when children are using this product.
mAbout Use of 3D Eyewear
®Parents/guardians should monitor children's viewing
habits to avoid their prolonged use without rest
periods.
® Use only the 3D Eyewear recommended for this TV.
® Only use the 3D Eyewear for the specified purpose.
®Do not move around while wearing the 3D Eyewear.
The surrounding area appears dark, which may result in
falling or other accidents that may cause injury.
mAbout Viewing of 3D Images
®In the event that you experience dizziness, nausea, or
other discomfort while viewing 3D images, discontinue
use and rest your eyes.
• When you set the effect by using "3D adjustment", take
into account that the vision of 3D images varies among
different individuals.
®Do not use if the 3D Eyewear is cracked or broken.
mAbout lithium battery
® Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Flat panel displays are not always supported on the
proper stands or installed according to the manufacturer's
recommendations. Flat panel displays that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers,
chests or carts may fall over and may cause personal injury or
even death.
The consumer electronics industry (of which Panasonic is
a member) is committed to making home entertainment
enjoyable and safe. To prevent personal injury or death, be
sure to follow the following safety guidelines:
TUNE INTO SAFETY:
• One size does NOT fit all. Follow the manufacturer's
recommendations for the safe installation and use of your
flat panel display.
• Carefully read and understand all enclosed instructions for
proper use of this product.
• Don't allow children to climb on or play with furniture and
television sets.
• Don't place flat panel displays on furniture that can easily be
used as steps, such as a chest of drawers.
• Remember that children can become excited while watching
a program, especially on "larger than life" flat panel
displays. Care should be taken to install the display where it
cannot be pushed, pulled over, or knocked down.
• Care should be taken to route all cords and cables
connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT
YOUR FLAT PANEL DISPLAY, ALWAYS:
• Use a mount that has been recommended by the display
manufacturer and/or listed by an independent laboratory
(such as UL, CSA, ETL).
• Follow all instructions supplied by the display and wall
mount manufacturers.
• If you have any doubts about your ability to safely
install your flat panel display, contact your retailer about
professional installation.
• Make sure the wall where you are mounting the display
is appropriate. Some wall mounts are not designed to
be mounted to walls with steel studs or old cinder block
construction. If you are unsure, contact a professional
installer.
• A minimum of two people are required for installation. Flat
panel displays can be heavy.
Panasonic recommends that a qualified installer perform
the wall=mount installation. See page 4.
The American Academy of Pediatrics discourages
television viewing for children younger than two years
of age.
6

This equipment has been tested and found to comply with the limits for an Other Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the Panasonic Service Center or an experienced radio/TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables
when connecting to peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. of
North America could void the user's authority to operate this device.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC Declaration of Conformity
Model No, TC-P50GT30, TC-P55GT30
Responsible Party:
Contact Source:
email:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Consumer Electronics Company
1-877-95-VIE RA (958-4372)
[email protected]
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz
and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices.
There is no proof, however, that these low power wireless devices are absolutely safe.
Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce
heating effects causes no known adverse health effects.
Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological
effects might occur, but such findings have not been confirmed by additional research.
Product Identification Marking is located on the bottom of the Wireless LAN Adapter.
CANADIAN NOTICE:
For Model TC-P50GT30, TC-P55GT30
This Class B digital apparatus complies with Canadian ICES-003.
7

Accessories/Optional Accessories
Check you have all the items shown.
[] Remote Control
Transmitter
® N2QAYB000571
[] Batteries for the
Remote Control
Transmitter (2)
® AA Battery [] Cable cl_
[] Wireless LAN Adapter (p. 39)
[] Converter cables (p. 11)
[] Owner's Manual
[] Quick start guide
[] Child safety
[] Product Registration Card (U.S.A.)
[] Pedestal
® TBL5ZX0081 (TC-P50GT30) ® TBL5ZX0058 (TC-P55GT30)
to assemble
(p. 9)
f0ptional Accessories Please contact your nearest Panasonic dealer to purchase the recommended
Optional accessories. For additional details, please refer to the Optional
accessories installation manual.
3D Eyewear
(Rechargeable type) • Product information (Model No. and release date etc.) is subject to change without notice.
® TY-EW3D2S _TY-EW3D2M • For more product information
® TY-EW3D2L (USA) http://www.panasonic.com (Canada) http://panasonic.ca
(Global reference) http:/Ipanasonic.netlavclvieral3dl
Communication Camera
¢ TY-CCIOW • This camera can be used on VIERA Connect.
• For details, read the manual of the Communication Camera.
Wall-hanging bracket
e TY-WK4P1RW (for 50")
TY-WK5P1RW (for 55") Rear of the TV for fixing the TV onto the wall-hanging bracket
(not supplied with the TV)
a: 15.7" (400 mm) (50")
19.7" (500 mm) (55") Holes for I-hanging (View from the side)
b: 11.8" (300 mm) bracket installation \
® In order to maintain the TV's performance and safety, be absolutely sure to ask your dealer or a licensed
contractor to secure the wall-hanging brackets.
e Carefullyreadthe instructionsaccompanyingoptionalaccessories,andbe absolutelysureto takestepstopreventtheTVfrom tippingover.
® Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
® Takecarewhenfixingwallbracketstothewall.Alwaysensurethattherearenoelectricalcablesor pipesin thewallbeforehangingthebracket.
e When using the angled-type wall hanging bracket, please ensure that there is sufficient space for the connecting
cables not to press against the wall when the TV is tilted forward.
8

reAssembling the pedestal
_ Fix securely with assembly screws _A_,(Total 4 screws).
_ Tighten screws firmly.
[TC-P50GT30] [TC-P55GT30]
_Pole
Base
Front
_;_Attach pole cover with assembly screw _C_(only for 50")
reSet-up
_DCarry out work on ahorizontal and level surface.
_ Tighten assembly screws \B_ (total 4 screws) loosely at first,
then tighten them firmly to fix securely.
Bottom view
Rear side
Arrow
mark Hole for pedestal
installation
Pole
Base
(Image: TC-P55GT30)
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall
hanging bracket or repacking the TV.
Remove the assembly screws _B_from the TV.
_2_Pull out the TV from the pedestal.
_3_Remove the assembly screw _€_from the cover (only for 50").
_4_Pull out the cover (only for 50").
_5_Remove the assembly screws _ from the pole.
Accessories
Assembly screws
XYN5+F20FN (for 50")
size (M5 x 20) (Silver) (4)
THEL090N (for 55")
size (M5 x 25) (Black) (4)
_B_ _
\v
THEL088N (for 50")
THEL090N (for 55")
size (M5 x 25) (Black) (4)
_c_ XSB4+8FNK (for 50")
size (M4 x 8) (Black) (1)
Pole (1)
(for 50")
Poles (2)
(for 55")
6_@ or (R) is printed at the
front of the poles.
Cover(1 )
(for 50")
Base (1)
(for 50")
(for 55")
®
o
o
Oo
O_
o
Co
O
o
>
o
o
©
U_
9

Do not disassemble or modify the pedestal.
® Otherwise the TV may fall over and become damaged, and personal injury may result.
( Caution )
Do not use any pedestal other than that provided with this TV.
e Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
® Ifyou use the pedestalwhen it is physically damaged, personal injurymay result.Contact your nearest PanasonicDealer immediately.
During set-up, make sure that all screws are securely tightened.
® If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (p. 9)
® Otherwise the TV and/or pedestal may fall over and become damaged, and personal injury may result.
Adjust the plasma panel to your
desired angle. (View from above)
Center of the
rotation.
e TC-P50GT30
a: 9.6 " (242 ram)
b: 18.2 " (460 mm)
c: 10 °
I__1
b
® Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
® Do not place any objects or hands within the full rotation range.
Hook Note the correct
polarity (+ or -).
Close ( Caution )
® Incorrect installation may cause
battery leakage and corrosion,
resulting in damage to the remote
control.
,_,Do not mix old and new batteries.
** Do not mix different battery types (such
as alkaline and manganese batteries).
** Do not use rechargeable (Ni-Cd)
batteries.
® Do not burn or break batteries.
10