Panasonic TY27SF24M User manual

FPanasonic
Assembly
Instructions
TY-27SF24M
VIDEO STAND
Important
Astudy of the assembly instructions will not only save you
time but may prevent possible damage to your new stand.
Assistance may be required for some assembly procedures.
CAUTION: THIS STANDSHOULD BEUSEDWITH CASTERS.
IT IS ALSO DESIGNEDFORUSEWITH
PANASONICTELEVISIONRECEIVERS.
UL APPROVED MODELS: CT-27SF12T, CT-27SF14V,
CT-27SF24V, CT-27SF34V
Your Pack Contains:
Video Stand A
Glass Door F
1 Pc. TKG2Q59481
"'TOLL FREE CUSTOMER ASSISTANCE LINE
1-800-900-MICA (6422) _
Monday - Thursday: 7:30 am - 4:30 pm E.S.T. _i
Friday: _ 7:30 am- 2:30 pm E.S._i_
_' _ __ ___i_i_ii_ii_i_ i_
Screw #8 x 5/8" B
16 Pcs. THT2QOFB76B
Pin D
(5 --)
2Pcs. IKC2Q25094
Caster _ C
1 Bag
4Pcs. TBL2QA4105
HingeMetal Plate E
Screw
_,_, 4 pcs. 2 Pcs.
1 Bag TKC2Q25129
Touch Plate G
1 Pc. _ TKC2025082
ToolRequired:
Phillips Screwdriver

STEP 1
!
t
1
Important:
To prevent the shelf from falling out when
installing the casters, it is important to keep
the "shelf shipping protector" intact before
turning the unit upside down.
• Lay the top of the stand on a soft surface
(carpet) to avoid any damage to the unit.
• Install casters (_) to pre-drilled holes
as shown, using screws (_.
\
STEP 2
• Turn the 3"V stand back to
the upright position.
•Remove shelf shipping
protectors.

STEP 3Glass Door Installation
®PLATE
®
3-1 • Apply hinge metal plates (_ to the glass door O on the
inside curvature of the glass as shown.
3-2 ° Slide the glass door (_) into the top and bottom hinges.
3-3 • Tighten the screws to fit against the hinge metal plates (_.
3-4 ° Remove protective liner from rubber pad and fold over door as shown.
Slide touch plate (_) over rubber pad.
Note: The glass door can be levelled by loosening the hinge metal screws (_.
J

STEP 4
Insert pins @as shown.
Placetelevision set on the
stand making sure the holes
on the bottom of the television
line up with the pins on the stand.
Replacement Parts
Glass I
TKG2Q59481
Door Hinge
TKC2Q25077-2
Screw with Washer
#6 x 5/8 in.
THT2Q3JB98B
i
RearCover
TKD2017376-1
HingeMetal Plate
Screw
TKC2025129
Screw #6 x 5/8 in.
THT2QO7B99B
Shelf
TKD2013365
TouchPlate
TKC2025082
Screw #6 X 3/4 in.
THT2QOKC128B
Shelf Pin
Pin ,TKC2Q25036
() )
1
TKC2Q25094
Screw #8 x5/8 in.
THT200FB76B
For Painted Surfaces:
Vinyl:
•Scuff Marks:
•Stains:
NOTE:
Caster
TBL2QA4105
Magnetic Latch
TKC2025080
Screw #8 x 1-15/16 in.
FKC2Q25069-1
To maintain appearance we recommend the following:
Use a damp clothforcleaning.Do not useanyabrasiveor chemicalbased cleaners.
Vinyldoes not need polishing and is remarkably resistantto almost any stain.
Most scratches and scuffscan be removed withfine steel wool and furniture wax.
A sponge,dippedin warm, soapywater and usedto wipe lightly over vinylwillremove most stains.
As with all indoor furniture, this unit should not be exposed to direct sunlight, extreme temperatures or
moisture, as this can result in serious irreparable damage.
For improvement purposes, design and specifications are subject to change without notice.
When making a part(s) inquiry, please quote part number and description.
For parts inquiries or for out of warranty purchases:
PANASONIC'SERVICES COMPANY
20421 84th Avenue South, Kent, Washington 98032 •Tel.: [phone] • Fax: [phone]
© 1997MatsushitaElectricIndustrialCo.,Ltd. • All rightsreserved.Unauthorizedcopyinganddistributionisa violationoflaw.
TOB2027SF24M Printed in Canada