IHF usable sensitivity (IHF ,58) 1.5 µV / 75Ω
IHF 46 dB stereo quieting sensitivity 22 µV / 75Ω
Total harmonic distortion
MONO 0.2%
STEREO 0.3%
S/N
MONO 60 dB
STEREO 58 dB
Frequency response 20 Hz to 15 kHz,
+1 dB, -2 dB
Alternate channel selectivity ±400 kHz, 65 dB
Capture ratio 1.5 dB
Image rejection at 98 MHz 40 dB
IF rejection at 98 MHz 70 dB
Spurious respone rejection at 98 MHz 70 dB
AM suppression 50 dB
Stereo separation 40 dB
Carrier leak 19 kHz, -30 dB
38 kHz, -50 dB
Channel balance (250 Hz-6.3 kHz) ±1.5 dB
Limiting point 1.2 µV
Bandwidth
IF amplifier 180 kHz
FM demodulator 1000 kHz
Antenna terminal 75 Ω(unbalanced)
nAM TUNER SECTION
Frequency range 522 kHz to 1611 kHz
(9 kHz steps)
530 kHz to 1620 kHz
(10 kHz steps)
Sensitivity 20 µV, 330 µV/m
1 Safety Precautions 4
1.1. GENERAL GUIDELINES 4
1.2. Before Repair and Adjustment 5
1.3. Protection Circuitry 5
2 Prevention of Electro Static Discharge (ESD) to
Electrostatically Sensitive (ES) Devices 6
3 Handling the Lead free Solder 7
3.1. General description about Lead Free Solder (PbF) 7
4 Accessories 8
5 Operating Instructions Procedures 9
5.1. Remote Control Operation 9
5.2. Main Unit Operation 10
5.3. Main Unit connections (SA-XR58) 11
Selectivity (at 999 kHz) 55 dB
IF rejection (at 999 kHz) 50 dB
nVIDEO SECTION
Output voltage at 1 V input (unbalanced) 1 ± 0.1 Vp-p
Maximum input voltage 1.5 Vp-p
Input/output impedance 75 Ω(unbalanced)
S-Video
Input DVD, DVD Recorder,
TV/STB
Output TV MONITOR
Component Video
Input DVD Recorder,
TV/STB
Output TV MONITOR
nGENERAL
Power supply AC 230 to 240 V, 50
Hz
Power consumption 140 W
Dimensions (W × H × D) 430 mm × 107.5 mm ×
390 mm
Mass 4.7 kg
Power consumption in standby mode: 0.9 W
Power consumption in HDMI off mode: 0.35 W
Notes:
1. Specifications are subject to change without notice.
2. Mass and dimensions are approximate.
3. Total harmonic distortion is measured by the digital spectrum
analyzer.
6 Self Diagnosis Display Function 19
6.1. Automatically Displayed Error Codes 19
6.2. Display Details 19
6.3. Returning to Normal Display 19
6.4. Overload/Shutdown Detection intenal Condition 19
6.5. Overload/Thermal Detection Display 19
6.6. Activating Self Diagnosis Function (Servicing Mode) 19
6.7. Analog 6.1 CH Output Check Method 20
6.8. Returning to Normal Display 20
6.9. Activating Self Diagnosis Function (Doctor Mode) 20
7 HDMI Checking Method 22
7.1. What is HDMI? 23
7.2. Advanced Digital Pictures 24
CONTENTS
Page Page
2
SA-XR58E / SA-XR58EG