
Key Features (WX-LP100)
• Integrated dual channel infrared wireless receiver
• Two stereo (mixed to mono) multimedia inputs
• Remote control of wireless microphones and multimedia
sources from presenter microphone
• Wide horizontal signal dispersion for even coverage
•
Compact, lightweight and rugged design for flexible placement
• Infrared technology provides an environment where frequency
interference & eavesdropping are problems of the past
• Front panel controls for easy access
• Adjustable output for recording
• Adjustable output for assistive listening devices
Components and Functions (WX-LP100)
DISTRIBUTED BY:
• All TV pictures are simulated.
• Weights and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
Trademarks and registered trademarks
–ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
www.panasonic.com/systemsintegration
3/2009 Printed in USA (1N-790C)
Appearance (WX-LP100)
Rear Panel
Top
Front Side Rear
Bottom
Front Panel
Specifications (WX-LP100)
Infrared Wireless Portable Sound System Optional Accessory
Infrared Wireless Powered Speaker
WX-LP100
All-in-one portable speaker incorporating
2-channel receiver, sensor,
amplifier and speaker.
Hands-free pendant-style microphone.
Equipped with remote volume controls.
Ideal for teacher or presenter use.
Direct connection.
Allows simultaneous charging
of 2 microphones.
Infrared Wireless Microphone (Pendant)
WX-LT350
Lightweight, simple design.
Ideal for student, teacher or
audience use.
Infrared Wireless Microphone (Handheld)
WX-LT150
Battery Charger
WX-LZ150
Infrared Wireless Portable Sound System
Amplifier/Receiver Unit
Power Source 24 V DC (Using the attached AC adaptor unit)
Power Consumption 450 mA
Infrared Sensor Input 75 ΩF type connector (with Sensor WX-LS100)
Output power for Sensor: 22 V DC, 100 mA Max.
Receiving Channel Ch1: 2.3 MHz, Ch2: 2.8 MHz
(Sub Carrier Frequencies)
Receiving System TRF (Tuned Radio Frequency)
Squelch Level 24 dBµV (including Sensor)
To ne Squelch Frequency 32.768 kHz
Line Input 1, 2
-
12 dBV, unbalanced, ø3.5 mini jack
(L and R mixing for stereo input)
Line Output 0 dBV, unbalanced, ø3.5 mini jack
(Monaural audio output for L and R)
Volume Control* changeable microphone volume by the 2 dB step
(+6 dB ~
-
16 dB) (Reset by power OFF/ON)
Speaker Type 12 cm Full Range Bass Reflex
SPL 93 dB SPL, 1 m, 1 W
Distortion Less than 1 %
Frequency Response 100 Hz ~ 15 kHz (Line input ~ Speaker output)
Operating Temperature +5 °C ~ +35 °C
Dimensions
187 (W) x 309 mm (H) x 209 mm (D) (7-3/8"(W) x 12-3/16"(H) x 8-1/4"(D))
Weight approx. 3.7 kg (8.14 lbs.)
Finish AV medium gray ABS resin (similar to Munsell N7)
* Volume controllable Microphone: WX-LT350
Infrared Sensor (attached)
Power Source 22 V DC (supplied from Amplifier/Receiver unit)
Power Consumption 20 mA
Infrared Ray Wavelength 850 nm
Sensor Output 75 ΩF type connector
Receiving Channel Ch1: 2.3 MHz, Ch2: 2.8 MHz
(Sub Carrier Frequencies)
Dimensions Max. ø113.5 mm x 34.5 mm (H) (ø4-7/16" x 1-3/8"(H))
(excluding a projection for F type connector)
Weight approx. 0.2 kg (0.44 lbs.)
Finish Black color / Infrared ray transmission acrylic resin
187(7-3/8")
209(8-1/4")
65
(2-9/16")
244(9-5/8")
Unit: mm (inches)
Sensor Input
Line Input 2
Line Input 1
Line Output
Line Output Volume Control
POWER
MIC 1 Volume Control
MIC 2 Volume Control
LINE 1 Volume Control
LINE 2 Volume Control
As an ENERGY STAR®
Par tner®, Panasonic has
determined that this product
meets the ENERGY STAR®
guidelines for energy efficiency.