Panasonic Omnivision PV-C1320W User manual

Panasonic
Combination VCR
Operating Instructions
Models No. PV-C1320 / PV-C1330W
PV-C1340 / PV-C1350W
payers unag
uoljeisdg 31seg
>
a
<
w
=
O
(D
a
O
U
My
=
pa
=
O
=
As an ENERGY STAR" Partner,
Matsushita Electric Corporation of
America has determined that this A
produc
or
produci
mode!
meets
ha
Groggy.
ENERGY STARF" guidelines for
energy
efficiency.
————
Please
read
these
instructions
carefully
before
attompting
to
connect,
operate
or
adjust
this
product.
Please
save
this
manual.
Spanish
Quick
Use
Guide
is
included.
(Guia
para
rápida
consulta
en
español
está
incluida.)
uonewojuj INOA JOY
LSOTO189A
For assistance, call 1-800-211-PANA(7262) |

Important
Safeguards
and
Precautions
READ AND RETAIN ALL SAFETY AND :
OPERATING INSTRUCTIONS. HEED ALL.
WARNINGS IN THE MANUAL AND ON UNIT
INSTALLATION
1 POWER SOURCE CAUTION
Operate only from power source indicated on unit
or in this manual. If uncertain, have your Electric
Utility Service Company or Video Products Dealer
verify your home power source.
2 POWER CORD PLUG :
For safety, this unit has a polarized type plug (one
wide blade), or a three-wire grounding type plug.
Always hold the plug firmly and make sure your
hands are dry when plugging in or unplugging the
AC power cord. Regularly remove dust, dirt, etc.
on the plug.
POLARIZED PLUG CAUTION:
The plug fits into outlet one way. If it cannot be fully
inserted, try reversing it. If it still will not fit, have an
electrician install the proper wall outlet. Do not
tamper with the plug.
GROUNDING PLUG CAUTION:
The plug requires a three-hole grounding outlet.
If necessary, have an electrician install the proper
outlet. Do not tamper with the plug.
3 POWER CORD
To avoid unit malfunction, and to protect against
electrical shock, fire or personal injury:
- Keep power cord away from heating appliances
and walking traffic. Do not rest heavy objects on,
or roll such objects over the power cord.
- Do not tamper with the cord in any way.
- An extension cord should have the same type
plug (polarized or grounding) and must be
securely connected.
- Overloaded walt outlets or extension cords is a
fire hazard.
- Frayed cords, damaged plugs, and damaged or
cracked wire insulation are hazardous and should
be replaced by a qualified electrician.
4 DO NOT BLOCK VENTILATION HOLES
Ventilation openings in the cabinet release heat
generated during operation. If blocked, heat
build-up may result in a fire hazard or heat
damage to cassettes.
For your protection:
a. Never cover ventilation slots while unit is ON, or
operate unit while placed on a bed, sofa, rug, or
other soft surface.
b. Avoid built-in installation, such as a book case
or rack, unless properly ventilated.
5 AVOID EXTREMELY HOT LOCATIONS OR
SUDDEN TEMPERATURE CHANGES
Do not place unit over or near a heater or
regulator, in direct sunlight, etc. If unit is suddenly
moved from a cold piace to a warm place,
moisture may condense in unit and on the tape
causing damage.
6 TO AVOID PERSONAL INJURY
* Never place unit on support or stand that is not
firm, level, and adequately strong.
The unit could fall causing serious
injury to a child or adult and
damage to the unit.
* Move any appliance and cart
combination with care.
Quick stops, excessive force, and ~ E
uneven surfaces may cause objects to overturn.
e Carefully follow all operating instructions.
OUTDOOR ANTENNA INSTALLATION
1 SAFE ANTENNA AND CABLE CONNECTION
An outside antenna or cable system must
be properly grounded to provide some antenna
protection against built up static AN
charges and voltage. iN
Section
810
of
the
===,
uN
DISCHARGE
UN
National Electrical Code, E eee
ANSI/NFPA 70 (in ie
Canada, part 1 of the
Canadian Electrical Code)
provides information
regarding proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection
to grounding electrodes, and requirements for the grounding electrode.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER
LINES OR CIRCUITS
Locate an outside antenna system well away from power lines and
electric light or power circuits so it will never touch these power sources
should it ever tall. When installing antenna, absolutely never touch
power lines, circuits or other power sources as this could be fatal.
USING THE UNIT
Before unit is brought out of storage or moved to a new location,
refer again to the INSTALLATION section of these safeguards.
t KEEP UNIT WELL AWAY FROM WATER OR MOISTURE,
such as vases, sinks, tubs, etc.
2 IF EXPOSED TO RAIN, MOISTURE, OR STRONG IMPACT,
unplug unit and have it inspected by a qualified service
technician before use.
3 ELECTRICAL STORMS
During a lightning storm, or before leaving unit unused for
extended periods of time, disconnect all equipment from the
power source as well as the antenna and cable system.
4 WHEN UNIT iS PLUGGED IN
«DO NOT OPERATE IF:
- liquid has spilled into unit.
- unit was dropped or otherwise damaged.
- unit emits smoke, malodors, or noises.
Immediately unplug unit, and have it inspected by a service
technician to avoid potential fire and shock hazards.
+ Never drop or push any object through openings in unit.
Touching internal parts may cause electric shock or fire hazard.
* Keep magnetic objects, such as speakers, away from unit to
avoid electrical interference.
5 USING ACCESSORIES
Use only accessories recommended by the manufacturer to
avoid risk of fire, shock, or other hazards.
6 CLEANING UNIT
Unplug unit. Use a clean, dry, chemically untreated cloth to
gently remove dust or debris. DO NOT USE cleaning ftuids,
aerosols, or forced air that could over-spray, or seep into unit
and cause electrical shock. Any substance, such as wax,
adhesive tape, etc. may mar the cabinet surface. Exposure to
greasy, humid, or dusty areas may adversely affect internal parts.
CROUINDING CONDUCTORS
WEC RECTION 610-71)
NEC - NATIONAL ELECTRICAL CODE (HEC ART 250, PART I)
SERVICE
1 DO NOT SERVICE PRODUCT YOURSELF
If, after carefully following detailed operating instructions, the
unit does not operate property, do not attempt to open or
remove covers, or make any adjustments not described in the
manual. Unplug unit and contact a qualified service technician.
2 REPLACEMENT OF PARTS
Make sure the service technician uses only parts specified by
the manufacturer, or have equal safety characteristics as
original parts. The use of unauthorized substitutes may result
in fire, electric shock, or other hazards.
3 SAFETY CHECK AFTER SERVICING
After unit is serviced or repaired, request that a through safety
check be done as described in the manufacturers service
literature to insure video unit is in safe operating condition.

Safety Precautions/Mesures de sécurité
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Avertissement: Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas
exposer cet appareil a la pluie ou a une humidité excessive.
Attention: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche
dans la borne correspondante de la prise et pousser jusqu’au fond.
This video recorder, equipped with the HQ (High Quality) System, is compatible with existing VHS
equipment.
Only use those tapes with the WHS! mark. It is recommended that only cassette tapes that have
been tested and inspected for use in 2, 4, 6, and 8 hour VCR machines be used.
This television receiver provides display of television closed captioning in accordance with §15.119
of the FCC rules.
FCC WARNING: Any unauthorized changes or modifications to this equipment
would void the user’s authority to operate.
This symbol warns the user that uninsulated
CAUTION
ore
sé
FISK GE ELECTRIC SHOCK voltage within the unit may have sufficient
DO NOT OPEN magnitude to cause electric shock.
Therefore, it is dangerous to make any kind
CAUTION: TO REDUCE THE RISK of contact with any inside part of this unit.
REGUL COVER (On BAG, | This symbol alerts the user that important
0
literature concerning the operation and
maintenance of this unit has been included.
Therefore, it should be read carefully
in order to avoid any problems.
NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
ete do m

able of Contents
O: - Important Safeguards and Precautions ... 2
To / Before USING ...ccccessesecesscseseereseeseee 6
/ ‘ ° E EE I a ime ...
/ Start! e ER the Batteries...... E ° PAA cere ee
ae Tape Erasure ..............00 6
o p-
A A TV Operation........ccccccsssssssessssseens 10
Ve ; (Main Operation, Using the 100 Key, Rapid Tune, Audio
Use / Mute, Phones, SELF-DEMO Mode)
el i A
/ Now! Picture Adjustment ................--.-. 11
A id
\ Timer Recording .................. 14-15
we (Main Operation, Cancel, Replace or Clear Program Contents)
Enjoy — Y TV Timer Features... 16~17
e ON-TIMER with Alarm............
MOTO. e TIMER o 38
o ee * INSTANT ALARM .......se:cseeee- 17
Closed Caption System......18 ~ 19
e Closed Caption Mode Feature ..... 18
e Caption On Mute Feature............. 19
FM Radió tia 20 ~ 21
e FM Radio Setup............20 * Using FM Radio............ 21
e FM ANTENNA Setup .... 20 i
mA R 2
a Reset Language,Channels,Clock ...36
Other
‘Information! Unit Informati0N.................omoo...... 38
ae On-Screen Display (OSD)........... 39
Spanish Quick Use Guide ..40 ~ 42
4 For assistance, call 1-800-211-PANA(7262)

CONMCCHOINS anida 7
* Outdoor Antenna Connections ...... 7
* DSS/Cable box Connections ......... 7
ONG Time SOUP aiii 8~9
(Language, Channel, Clock)
Playback a apo. iii 12
(Main Operation, Forward or Reverse Search, Still Picture, Slow Motion, Frame by Frame
Advance, Features for a Quality Picture)
Record ON a VARS sisii 13
(Main Operation, One Touch Recording (OTR), Selecting Input Mode)
Tape Operation...........
e Commercial SkiP.......oococccccccncnnnos. 22
«Program End Search ................... 22
* Repeat Play is tiles 23
Special VCR Features
e Channel Caption .................... 26, 27
© Time Stamp talas icids 28, 29
Copy Your Tapes (Dubbing)
V-Chip Control Feature ............:cccsssessssseeccenens
e Enter Secret Code ................08 32
+ Setup US MOVIES Ratings ......... 33
Before Requesting Service
s Zero Search vacienw aun 23
¢ Auto Operation Functions............ 23
e VHS Index Search System .... 24, 25
¢ Weak Signal Display ON/OFF ..... 30
+ VOR AA prii retinae dk 30
e Setup US TV PROGRAMS Ratings ... 34
e Blocking Message seee 35
Service Center LiSt ...........scececscscsceccscececcccsescsessscerece
Wan oiishi annapre
Location of Controls..
paj1e3s umag
uonesado 21seg
uoiesado pasuenrpy
UONEWHOJU] JNOA J04

Before Using
Congratulations
on your purchase of one of the most sophisticated and
reliable products on the market today. Used properly, it will
bring you and your family years of enjoyment. Please fill in
the information below. The serial number is on the tag
located on the back of your unit.
Loading the Batteries
1) Open the cover.
2) Insert batteries
Date
of
Purchase
as
marked.
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
3) Close the cover.
C] Battery replacement caution
* Do not mix old and new batteries.
* Do not mix alkaline with manganese batteries.
Accessories
LJ Remote Control
LSSQ0221
(PV-C1320/PV-C1340)
LSSQ0226
(PV-C1330W/PV-C1350W)
Kitchen (Easy-Find™)
Remote Control
<For model PV-C1350W only>
1) ® While pressing the
stopper tab, (B) pull the
Battery Tray out.
: s 2) Insert the battery into the
LJ Batteries XS A S Battery Tray with the O
Y mark facing down.
Do not reverse the polarity.
3) Replace the Battery Tray.
OE ICON
Replace battery with Panasonic PART NO,
VSBW0004 (CR2025) only. Use of another battery
may present a risk of fire or explosion. Caution-
battery may explode if mistreated. Dispose of used
battery promptly. Keep away from children. Do not
recharge, disassemble or dispose of in fire.
[ Kitchen (Easy-Find™)
Remote(VSQS1572)
with one CR2025 Battery
<For model PV-C1350W only>
» The Kitchen remote control
has been loaded with battery.
To order accessories,
call toll free 1-800-332-5368.
Record/Playback Time eee ere
Only use tapes with the mark in this unit.
Tape Speed Type of Video Cassette
Setting
T120
Screw
driver
SP 2 Hours To record again.
(Standard
Play)
40
Minutes
LP 5 Hours
(Long Play) 2 Hours 20 Minutes
f — ri —
Cover the hole
with cellophane tape.
6 For assistance, call 1-800-211-PANA(7262)
SLP
(Super
Long
Play)
||
9
Hours
|
6
Hours
8
Hours

Outdoor Antenna Connections
Unhook the antenna from your UHF/VHF Band
previous TV or VCR and connect it to Mixer: (nor euppked)
the back of the unit as shown in the (Flat) Twin Lead
diagram. 300 Ohm Cable ——-<
If your antenna system has separate (Round) 75 Ohm a
UHF and VHF lead-ins, you need a coaxial Cable pe
UHF/VHF Band Mixer (not supplied.)
ftom Æ-------- or a
WARNING: Antenna
When
using
“Nut
type”
RF
coaxial
|
0
QR
eee
eer
cables,
tighten
with
fingers
only.
300-75
ohm
==
Transformer
Back of unit
Overtightening may damage
terminals. (Flat) Twin Lead (not supplied)
300 Ohm Cable
DSS/Cable box Connections
E Without a Cable Box
You can;
* record or view unscrambled channels.
You cannot;
* record or view scrambled channels.
s view a channel other than the one
selected for any type of recording.
unit
VHF/
UHF
E With a Cable Box
You can;
* record or view any channel including scrambled channels.
NOTE: Channel selection must be made at the cable box.
You cannot;
* view a channel other than the one selected for any
type of recording.
e do a Timer recording of a channel unless you select it Cable Box
at the cable box.
Note to CABLE System Installer IN| our VHF/
This reminder is provided to call the CABLE (Cable TV) System UHF
Installers attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that
the cable ground shall be connected to the grounding system of
the building, as close to the point of cable entry as practical.
SS
VA Ni
/ Antenna \
unit
@ With a DSS Receiver “~*~ 7-5
rA X
JOD
CAN
= fe
ace
/Antenna
A.
* record or view any channel including scrambled
channels. }
NOTE: Channel selection must be made at the DSS f
Receiver.
You cannot;
« view a channel other than the one selected for .
any type of recording. DSS Receiver
e do a Timer recording of a channel unless you
select it at the DSS box. IN IN VHF/
NOTE: The DSS receiver must be turned off to view UHF
programs from a cable box or antenna. See the DSS OUT
manual
for
details.
A
SS
pa31e1s Humay

One Time Setup
When the unit is turned on the first time, setup Process of Setup
mode is entered automatically.
Aaa
Press
POWER
on
|
Language
>
channelj
=
Clock
|
the remote or unit.
Select the language.
SELECT LANGUAGE guag A Power
PUSH CH á :English for English
OPRIMIR CH Y :Español
APP. VOL + Francais for Spanish
(Español) 2 CHANNEL
for French » UP/DOWN
(Frangais)
* If wrong language is set, complete “Reset all unit Memory
Functions” steps page 39.
e If you use a cable box, it must be left on. ØJ VOLUME
Start Channel Auto Set
CHANINEL/ CLOCK AUTO SET | nd Clock Auto Set.
CONNECT ANTENNA CABLE
A tenet TS Coca Press CH A.
LOCAL PBS CH THEN...
PLEASE PUSH CH UP KEY
| CH AUTO SET PROCEEDING |
AUTO CLOCK SET
PROCEEDING
(Case 1) (Setup completed) (Case 2) 2| (Setup incomplete)
Press CH A to exit.
n 7/2000 WED 12:00PM * If your area observes
f daylight saving time,
A but you would like to Akasa
AUTO CLOCK SET turn the DST feature IS INCOMPLETE
COMPLETED off, complete the See Case 2
“To Set or Reset the PUSH ACTION TO SET CLOCK
END
:
PUSH
CH UP
KEY
Clock”
step
on
page
next
page.
37 and set DST: OFF.
* If your area observes daylight saving
time and DST is set to ON, but the
time is incorrect; complete the Time
Zone Adjust steps on the next page.
IMPORTANT NOTE FOR AUTO CLOCK SET
+ Auto clock set is performed the first time when the unit is turned off each day. If used, a cable box must be left on and
tuned to the PBS channel at the time the unit power is turned off if you want auto clock Set to be done.
* If using a DSS receiver, it must be turned off for auto clock set.
e lí a Cable Box or DSS receiver is connected to the unit via Audio/Video Jacks, an RF coaxial cable must also be
connected for auto clock set and channe! auto set features.
+» If for any reason the time is changed manually, automatic time correction will not occur.
8 For assistance, call 1-800-211-PANA(7262)

Set TIME ZONE ADJUST.
Display MAIN MENU.
Press ACTION.
MAIN MENU Display SET CLOCK
screen.
1) Press AV >
to select
4 Y 4 > KEY “CLOCK”
ee 2) Press ACTION
to display.
SET CLOCK Select TIME
ZONE ADJUST.
MANUAL 1) Press AV
TIME ZONE ADJUST 0
to select.
SELECT:A Y KEY
SET ¿4 > KEY
END :ACTION KEY
2) Press <P to
subtract or add
hour(s) as
necessary.
End setup.
Press ACTION twice.
«TIME ZONE ADJUST
returns to “0” if clock is set
manually.
4
C 2 Clock Setup is Incomplete
Set the clock manually.
Display SET CLOCK
screen.
K
ee Press ACTION
IS INCOMPLETE ‘ 7
to exit this
PUSH ACTION TO SET CLOCK mode.
Set the clock
manually.
1) Press AV to
select the month.
ps 35 | 2) Press P to set.
SELECT MONTH
SELECT: 4 ¥ KEY
SET ¡> KEY
END : ACTION KEY
* Likewise set date, year, time,
and DST (Daylight Saving Time.)
To Make Corrections,
repeatedly press <P to move
to error, then correct.
End setup.
Press ACTION twice
(Clock starts.)
ACTION
dE l byes
2 SELECT/SET
* A:CHUP
Y :CH DOWN
* > :VOL UP
bD«<:voL DOWN
e This unit's calendar is accurately maintained
up to Dec. 31, 2089, 11:59 PM.
* Channel auto set selects normal TV or
Cable channels depending on your unit
hookup.
ACTION key on the unit
You can operate the
menu screen using unit
buttons.
To display the menu,
press STOP/EJECT and
REW together with no
tape inserted.
To exit the menu, repeat above with or
without tape inserted.
On Unit
Using AV<4P keys
A: CH UP
Y : CH DOWN
<q: VOLUME DOWN
Whenever the menu or
program screen is
vo œ | displayed,
O@OO| CHANNEL UP/DOWN
function as AV and
VOLUME UP/DOWN
function as € > only.
On Remote
On Unit
payieys Bulyas)

TV Operation
Press POWER on
the remote or unit.
Select a channel.
Using CH AY or
CH 08
ABC
e
=z
= | NUMBERED
= keys.
O
o
Sd
4
3
Adjust volume.
Press VOL + -.
y vou
g +
‘©
24 (1186111065
E Using the 100 key .
When selecting CABLE channels 100 to 125 with the
NUMBERED keys, first press the 100 key, and then enter the
remaining two digits.
E Rapid Tune
Press R-TUNE to display the last channel you were watching.
E Audio Mute
Press MUTE to instantly mute the sound.
Press again, to restore the previous Sound level.
@ Phones
Connect an earphone (not supplied) or headphones (not
supplied) to the Phones Jack.
E SELF-DEMO Mode
With Power ON, hold down PLAY/REPEAT on the unit for 5
seconds to display demo screen.
Repeat this to exit.
A check list before you begin.
[_] All connections are made. (See page 7.)
Your unit is plugged in.
Models PV-C1320/1330W/1340
unit is shown here.
PLAY/
REPEAT
PHONES
1 2 Jack
“VOLUME
UP/DOWN
POWER CHANNEL
MUTE— UP/DOWN
RAPID |È art 2
RAPID 1 fess MER | NUMBERED
: Keys
1 0 For assistance, call 1-800-211-PANA(7262)

9
SET UP TV
LOCK
CAPTION
INPUT SELECT
VIDEO ADJUST
FM ANTENNA ¿INT
SELECT :4 Y KEY
SET ¡e KEY
END ¡ACTION KEY
ee
BRIGHTNESS SO
PICTURE
SHARPNESS
NORMAL
SELECT :4 Y KEY
ADJUST :4 > KEY
END ¡ACTION KEY
TINT
BRIGHTNESS
PICTURE seerste
SHARPNESS ~- Jara
SELECT: 4 ¥ KEY
SET 7» KEY
END ‘ACTION KEY
ACTION
O
: TUNER
Display MAIN MENU.
Press ACTION.
Display SET UP TV screen.
1) Press AV-<4 >
to select “TV.”
© | 2) Press ACTION
to display
Display VIDEO ADJUST
screen.
1) Press AY to
select.
2) Press > to
display.
Adjust desired item.
1) Press AY to
select an item.
(See below right.)
2) Press <> to
adjust.
To Reset Picture Controls.
Press AY and >> to select
and set “NORMAL.”
All controls return to their
factory settings.
End setup.
Press ACTION three times
to exit.
jj LsELECTISET
~ å CH UP
VW :CH DOWN
> :VOL UP
4% "VOL DOWN
{action
Picture Adjustment
E COLOR Control
Adjust color intensity.
TINT Control
Adjust for natural flesh tones.
BRIGHTNESS Control
Adjust picture brightness.
PICTURE Control
Adjust picture intensity by adjusting
both contrast and color level in the
proper balance.
SHARPNESS Control
Adjust picture sharpness.
11
ue]
D
pda
O
O
©
D
Lm 4
o)
=t
O
=

Models PV-C1320/1330W/1340 : :
q
is
shown
here.
LA
check
list
before
you
begin.
L] All connections are made. (See page 7.)
E] Your unit is plugged in.
Insert a cassette.
+ The unit power comes on
automatically.
Record tab
To prevent tape jam
Inspect your cassette tapes and
remove any loose or peeling labels.
Press PLAY.
+ Playback begins if cassette
has no record tab.
E To Find a Particular Scene
Forward Search > Press FF
(To release, press PLAY or FF}
Reverse Search > Press REW
(To release, press PLAY or REW)
E To view a Still (Freeze) picture >
Press PAUSE/SLOW (To release, press PLAY)
E To view in Slow Motion >
Press and hold PAUSE/SLOW in the Still mode
(To release, press PLAY)
@ To view Frame by Frame Advance >
Press PAUSE/SLOW in the Still mode (To release, press PLAY)
After the unit is in Still or Slow mode for 3 minutes, it will switch to
Stop mode automatically to protect the tape and the video head.
E To stop > Press STOP
E To rewind tape > Press REW in Stop mode
E To fast forward tape > Press FF in Stop mode
E To eject tape > Press STOP/EJECT on the unit
You can operate on the unit
<Models PV-C1320/1330W/1340 ; R
unit is shown here.> Features for a Quality Picture
Insert a Digital Auto Tracking
cassette. Continuously analyzes the signal and adjusts for optimum
picture quality.
Press
2 PLAY. Manual Tracking Control! (to reduce picture noise)
Use during Playback and Slow Motion mode to reduce picture noise.
Press the 3 or 6 NUMBERED key on the remote control or CHAW
on the unit until the picture clears up. To return to Auto Tracking,
press POWER off, then on again a few seconds later.
\ ed Eros EMITIÓ) is
2
V-Lock
Control
<For Models PV-C1340/1350W_only>
In Still mode, the 3 or 6 NUMBERED key on the remote control or
CH AY on the unit operate as a V-Lock control to reduce jitter.
12 For assistance, call 1-800-211-PANA(7262)

Models PV-C1320/1330W/134
unit is shown here. -
ACTION
SET/
SELECT
4:CH UP
Y: CH DOWN
»-VOL UP
4: VOL DOWN
TUNE || 100 0. |
Y | am E +
Selecting Input Mode
Method 1:
Press CHAY. The display will change as
follows. 1.» 2.3
(CABLE) (TV)
LINE+——*125 or 69
Method 2:
a Press ACTION for MAIN MENU.
b Press AV<4> to select “TV”, then press
ACTION for SET UP TV screen.
c Press AY to select “INPUT SELECT,” and
then press » to select “TUNER?” or “LINE.”
d Press ACTION twice to exit this mode.
[A check list before you begin.
[C] All connections are made. (See page 7.)
[C] Your unit is plugged in.
(_] Cassette with record tab in place.
Insert a cassette.
¢ The unit power comes on
automatically.
Select Channel.
Press CH AY, or
NUMBERED keys.
¢ To select “LINE,” see bottom
of this page.
a
=z
SELECTA —
000
Select Recording
speed (see page 6.)
Press SPEED.
SP = Standard Play
LP = Long Play
SLP = Super Long Play
* Selected speed is displayed.
00
o
2,
O
O
©
1)
=
Q
=y
O
3
Start Recording.
Press REC.
¢ To edit out unwanted portions,
press PAUSE to pause and
resume recording.
* You cannot view another
channel during recording.
M To stop > Press STOP
E One Touch Recording (OTR)
Press REC repeatedly to set the recording length
(30 min - 4 hours.)
« The unit stops recording at a preset time.
* PROG TIMER indicator lights on the unit.
ae Rec —= 0:30 — 1 5
4:00 4— 3:00 4— 2:00 4 1:30
¢ After the unit has been in Rec Pause mode for 5 minutes, it
will stop automatically to protect the tape and video head.
¢ The remaining recording time of an OTR can be displayed by
pressing DISPLAY.
You can operate on the unit
<Models PV-C1320/1330W/1340 unit is shown here.>
Insert a 2
cassette.
E a fs
(=e o a'o («TEM IO 0)
|
7e
|
REC Indicator
E Press to stop.

imer Recording
You can set up to 8 programs to be recorded while you are away.
1 EER Display PROGRAM screen.
O Press PROG.
Select TIMER PROGRAM.
l ) SET PROGRAM
1) Press AV
to select.
en 2) Press Pb to
SELECT :4 Y KEY display.
SET ¡Pb KEY
END : PROG KEY
* If a program is already in memory,
press AY, and } to select an
unused program number.
ly START STOP CH Set the recording DATE.
1) Press AV
to select.
2) Press > or dl
to set.
SELECT START DATE
SELECT:4 ¥ KEY
SET 7» KEY
END :PROG/ACTION KEY
« 1-31 = One time
« DAILY = MON-FRI
* WEEKLY SUN-SAT
Example A o = Same time once a
A a o TE
Today's —7 SELECTA / Y Selection Order DAILY
Date (L WEEKLY ..... WEEKLY __WEEKLY
(SAT) (MON) (SUN)
Repeat step 3 to set:
* start time, stop time
* Channel (or LINE for outside source)
* Category [N/A (not applicable),
SPORTS, MOVIE, COMEDY,
MUSIC, DRAMA]
* Speed (SP, LP, SLP)
DATE staat stop cu] Make the notes.
ae (If not wanted, go to step 5.)
TODAY ABC
7 FR! 9:00P 12:00A 08
Press A to
ES begin:
WISH TO MAKE NOTES :4 KEY Press AY to
END -PROG/ACTION KEY select.
Press» or d
* Characters will change to set.
in
the
following
order.
Press
PROG
(or ACTION)
to end.
A— B—C-----2— BLANK— — —&
inated Stee q cd dr PE!
* 2 minutes before Timer recording is performed, “PLEASE PREPARE FOR
TIMER REC” appears and/or the PROG TIMER indicator flashes. Be sure
a cassette with record tab is loaded and the unit is in Stop mode.
* if the start times of two programs overlap, the lower numbered program
will have priority.
* If the start time for a Timer Recording comes up during a normal recording
or One Touch Recording (page 13), the Timer Recording will not be
performed.
* If there is a power interruption of more than one minute, the recording
may not be performed or continue.
* lf “INCOMPLETE” appears after all items have been set, check all entries
and make necessary corrections.
Continued on the next page.
A check list before you begin.
[OD All connections are made. (See page 7.)
_] Your unit is plugged in.
(_] The clock is set to correct time.
C] The tape is long enough.
C] The record tab is in place.
—2SeLECT/SET
2 A :CH UP
3v :CH DOWN
4’ “VOL UP
4@:VOL DOWN
„100: . 7 @: abet
<a: | am): (am). |
1
Timer Recording Using
unit Buttons
You can set a Timer Recording using
ACTION key on the unit. (See page 9.)
í Press STOP/EJECT and REW
together without a tape inserted to
display MAIN MENU.
2 Press AW + - to select “VCR”
and STOP/EJECT and REW together
to display SET UP VCR screen.
3 Press AW to select “TIMER
PROGRAM’ and + to display the
TIMER PROGRAM screen.
4 Repeat main steps 3-6.
14 For assistance, call 1-800-211-PANA(7262)

P OT START STOP cm spo) End the program.
day 9:00p 12:00a 08 SPIR
Se
eee
aoe
Press
PROG
2 am dm mm -æ --
Rie?
EOS
A
IES
PROG
(or
ACTION.)
CANCEL: ADD/DLT KEY
SELECT 1-8:4 ¥ KEY
ENTER :» KEY
END :PROG/ACTION KEY
To Enter More Programs
Press AY and P to select and
set a blank program number,
and then repeat steps 3 and 4.
6 SiOn Exit this mode.
O Press PROG
(or ACTION) twice.
e If you're using a cable box, make
sure that it is turned to the desired
channel and the power is left on for
timer recording.
* PROG TIMER indicator lights on
the unit.
Review, Replace or Clear Program
Contents : (Recording is not in progress)
a Repeat steps 1 and 2 on page 14.
> DT START STOP cH spo) Select the desired
2 È 10:00at2:oop12s SP| Program.
1 : ; 1
4 SU 9:00p10: 00p L Press AV to
CANCEL : ADD/DLT KEY = select.
SELECT 1-8:4 ¥ KEY ü
ENTER :» KEY
END :PROG/ACTION KEY
C To Replace program...
1) Press» to
START STOP CH ;
display.
B SAT 9-00P 12-008 E
CORE ¡MOVIE = 2) IES Av to
NOTES: STAND BY ME select and € or
> to set new
ee ee rey program contents.
END :PROG/ACTION KEY 3) Press PROG
(or ACTION.)
To Clear program...
P DT START STOP CH SPD Press ADD/DLT.
2 8 10:00p12:00a125 SP ADD/DLT
3 10 8:00p 9:00p 10 SP >
4 SU 9:00p10:00p L LP
SELECT 1-8:4 ¥ KEY
ENTER :» KEY
END :PROG/ACTION KEY
EA Exit this mode.
O Press PROG
(or ACTION) twice.
Cancel a Timer
' Recording:
(Recording is in progress)
Hold down STOP for a few seconds
to cancel the Timer Recording.
» Any future daily or weekly recordings
will be performed as programmed.
Models PV-C1320/1330W/1340
unit is shown here.
PROG TIMER indicator
P :VOL UP
<:VOL DOW
C PROG
d
C
ADD/DLT
k
=p) (19:01)
a4. s. {a9
>
¡el
<
o)
5
©
0
Dsevectiser a.
” a:CH UP Ó
Cv :cH DOWN E
=
9)
=.
(s)
5
STOP
15

imer Features
[A check list before you begin.
O The clock is set to correct time.
ON-TIMER with Alarm
This unit can be set to automatically power on in one of 3 modes (TV,
Playback, or FM Radio.) You can also combine the On-Timer with a one
minute
alarm
that
gradually
increases
in
volume.
Models
PV-C1320/1330W/1
340
:
l
unit
is
shown
here.
PROG
Display
PROGRAM
O.
screen.
Press
PROG.
SET
PROGRAM
Select
ON-TIMER.
1)
Press
AV
TI
MER_PROGRAMMING
to
select.
2)
Press
>
to
SELECT
:&
¥
KEY
display.
3
Set
the
ON-TIMER
TIME.
1)
Press
AY
to
select.
ON
TIMER
indicator
SELECT HOUR
SELECT :4 Y KEY
SET :> KEY
END :PROG
2) Press P to set
+ Make sure a tape is
inserted if Playback
* ON-TIMER mode selection order mode is selected.
CH02—-CHO3"""""0CH125 * See “FM Radio” on
J pages 20 and 21 for
CHO1 PLAY instructions on how
UL j to preset FM
FM9 —FM8:""**FM1 stations.
ON TIMER Set Alarm.
6:00AM CHO8 piece Awe
O ee 2 SELECT/SET
CANCEL : ADD/ DLF KEY OFF. s A:CH UP
cer ster 37:
END
¿PROG
KEY
FWY
:CH
DOWN
4» voLuP
When “ON” is selected, d VOL DOWN
an alarm will gradually increase in volume for one minute or 1
until canceled by pressing any button (including VOL + -.) Y PROG
To Make Corrections,
use AY and <4 > to move back and correct as necessary.
PROG Set ON TIMER. (cm). ¿a ADD/DLT
O Press PROG.
« “ON TIMER SET” is displayed.
* ON TIMER indicator lights on the unit.
To cancel ON-TIMER set, ED
Repeat steps 1 and 2. Then, press ADD/DLT to clear the time in step 3. If no button on the remote or unit (including
Now, press PROG to end. “ON TIMER END” appears on-screen for a a button used to turn off the alarm) is
few seconds. pressed within 60 minutes after unit turns
itself on, it will turn itself back off.
1 6 For assistance, call 1-800-211-PANA(7262)

e
SLEEP TIMER
This unit can be set for auto power off.
Set SLEEP TIMER.
Press SLEEP repeatedly.
* Pressing DISPLAY with sleep
timer set displays remaining time.
To cancel, press SLEEP repeatedly
until “SLEEP TIMER 00” appears.
SLEEP TIMER 30
SLEEP TIMER 60
SLEEP TIMER 90
SLEEP TIMER 00
INSTANT ALARM
The feature allows you to set a timer alarm for up to 60 minutes.
Useful for when you are cooking and need to leave the kitchen.
1 TER EM Display INSTANT ALARM
screen.
O Press TIMER/FM or KITCHEN
TIMER/FM (PV-C1350W) on the
TIMER/FM button is shown. unit to display.
Set Alarm.
Press CH AY on
dl the unit to select time
while “CANCEL” and
OO “SET” are displaying
CANCEL: ADD/DLT KEY 02: (see below.)
SET:CH à Y KEY ON UNIT
Press TIMER/FM or KITCHEN
TIMER/FM (PV-C1350W) on the unit
repeatedly to change display as
follows,
TV INSTANT ALARM INSTANT ALARM
=p>| Screen Display =f»; Screen Display
(or LINE) | TV {or LINE) FM
To cancel, press ADD/DLT while
¡1:00 fone minute) “CANCEL” and “SET” are
20 one-minute displaying.
; 300 increase f f :
¿9 Until 10:00 To increase timer in progress,
A . Press CH AY on the unit to restart
cos: vemi countdown rounded up to next 1,
Ir 5, or 10 minute interval while
' odoo until 30:00 “CANCEL” and “SET” are
- 30.00 conus displaying.
| ano ten-minute
i clog increase <Example>
; until 60:00 * If current time remaining is 12:15,
+. 60:00 (Max) - --!
countdown will restan from 15:00.
* If current time remaining is 9:15,
countdown will restart from 10:00.
Press any button to stop. |
+ The volume of the alarm gradually increases for one minute
and then continues to beep until any button is pressed.
eae | $4.0
3 Alarm will sound at 0: 00.
Pat
oe
Models PV-C1320/1330W/1340: .
unit is shown here.
Esos HENGA
CON E
2 CHAV 1 TIMER/FM
(or KITCHEN
TIMER/FM for
PV-C1350W)
uonelado pasduenpy
You can be change channels with CH AV
on the unit while "CANCEL” and “SET” are
not displaying during timer progress.
ae 17

Closed Caption System
Closed Caption Mode Feature
1 Display MAIN MENU.
ACTION
O Press ACTION.
MAIN MENU Display SET UP TV
screen.
1) Press AV a>
¿€ to select “TV.”
S | 2) Press ACTION
. to display.
ACTION
O
Display CAPTION screen.
1) Press AY to
select.
2) Press > to
display.
SET UP Tv
LOCK
CAPTION
INPUT SELECT
VIDEO ADJUST
: TUNER
SELECT:4 Y KEY
SET :> KEY
END :ACTION KEY
Select CAPTION MODE.
CAPTION
CC ON MUTE : CAP C1 1) Press AY to
select.
SELECT :4 Y KEY 2) Press p
END ACTION KEY repeatedly to
select caption
mode.
y» OFF —» CAP C1 ~
TEXT C2 TEXT C1
CAP C2
a Return to the normal __ to the normal
5 Cc screen.
Press ACTION three times.
Recording and Playing Back a Closed Caption/
Text Program
Record:
Record normally. Closed Caption/Text signal, if present, is recorded
automatically.
Playback:
Start playback. Do above steps to select desired caption mode.
18
l Closed Caption is ...
This multi-use system not only allows the
hearing impaired to enjoy selected
programs, but also makes useful information
from TV stations available to everyone.
2 SELECT/SET
= & :CH UP
V:CH DOWN
P :VOL UP
4% ‘VOL DOWN
1 ACTION
Cre mD) =
2
Closed Caption Modes from
which to Choose
Caption Mode: CAP C1 or C2
A narration of selected TV programs is
displayed.
Check TV program listings for C. C. (Closed
Caption) broadcasts.
Caption Mode: TEXT C1 or C2
The lower half of the screen will be blocked
out. When the TV station broadcasts
information, such as program listings, it will
appear in this space.
Caption Mode: OFF
Closed Caption /Text narration will not be
displayed.
NOTE:
The closed caption or text signal may be
broadcast over C1, C2, or both. Also, text
contents can vary so you may wish to try
different settings.
For assistance, call 1-800-211-PANA(7262)

Caption On Mute Feature
Closed Caption narration, if available, is displayed when MUTE
button is pressed for silence.
1 Display MAIN MENU.
ACTION
O Press ACTION.
2 MAIN MENU ml ll SET UP TV
© ae 1) Press AV<4 >
to select “TV.”
CLOCK 0)
¿A Y 4 > KEY 2) Press ACTION
SEET ¡ACTION KEY to display.
SET UP TV Display CAPTION screen.
LOCK
[CAPTION]
INPUT SELECT :TUNER
VIDEO ADJUST
1) Press AY to
select.
SELECT:A
v
KEY
2)
Press
>>
to
END ACTION KEY display.
CAPTION Set CAPTION MODE OFF.
SCONMUTE 1) Press AY to
select.
SELECT
:&
Y
KEY
2)
Press
>
a
ee
repeatedly
to
select
“OFF.”
CAPTION
Select
CC
ON
MUTE.
CAPTION MODE : OFF
CC ON MUTE CAP 3
1) Press AY to
select.
2) Press >
repeatedly to
select desired
caption mode.
SELECT :4 Y KEY
SET ¡> KEY
END ¡ACTION KEY
NO —»> CAP C1 * Each press of } will change the
: ) . , „display as shown at left.
CAP C2 * The caption may be broadcast over
CAP Ci or C2.
Return to the normal
6 PETEN screen.
O Press ACTION three times.
Mute sound, display
closed captioning.
Press MUTE to mute the
sound.
* To cancel, press MUTE again.
1 ACTION
2 SELECT/SET sran
~ A CH UP
Y :CH DOWN
P :VOL UP
4% ‘VOL DOWN
5
T MUTE
uoielado pasuernpy
19

FM Radio
1138.
12:00PM
FM 1 87. 5MHz
12:00PM
FM 1 87. 7MHz
MEMORY:PUSH ADD/DLT KEY
12:00PM
FM 1 87. 7MHz
MEMORIZED
To Make Corrections,
FM Radio Setup
Display FM radio mode.
Press FM/TV on the remote
or TIMER/FM (KITCHEN TIMER/FM
for PV-C1350W) twice on the unit.
Select the FM number.
Press a
© © © | NUMBERED key
OO | (1-9)
06065
Set the radio station.
1) Press CH AV
to select the
desired radio
station.
{Each press changes
frequency 200 kHz.)
2) Press ADD/DLT
to set.
Quick Station Scan
Hold down CH Aor Y for a few
seconds, then release to
scan for FM stations in your area.
* To cancel, press CH A or Y while
in search mode.
select station with a NUMBERED key, then do step 3 again.
FM Radio is ...
This unit has an FM radio with built-in
antenna, 9 station preset, and a band range
of 87.5 ~ 108.1 MHz. You can even set the
On-Timer (page 16) to wake up to your
favorite radio station.
Models PV-C1320/1330W/1340
unit is shown here.
1 TIMER/FM
(or KITCHEN TIMER/FM
for PV-C1350W)
AACTION
To exit FM mode, press FM/TV on the remote or
TIMER/FM (KITCHEN TIMER/FM for PV-C1350W)
twice on the unit.
$ SELECT/SET
FM
ANTENNA
Setup
ol
pa
Make
sure
FM tuning
is
done
correctly
=)
i
æ
cp
“VOL
UP
(See
FM
Radio
Setup.)
=
san
4:VOL
DOWN
Display MAIN MENU. LATER, = 2NUMBERED
ACTION
(an7
œ
keys
Cc)
Press
ACTION.
fn}
3
ADD/DLT
MAIN MENU Display SET UP TV Ne
b
E)
=)
|
sereen.
Trv-
ANGUAGE 1) Press AV<44 >
[3e] to select “TV.”
SELECT
:4
Y
4
>
KEY
2)
Press
ACTION
SET ¡ACTION KEY to display.
Continued on the next page...
For assistance, call 1-800-211-PANA(7262)
20