Paralan PTU-302 User manual

User’s Manual English
1-5
USB 3.0
2 Port PCI Express Card
Model: PTU-302

User’s Manual English
2-5
INTRODUCTION
Thank you for purchasing the PTU-302 it is the Universal Serial Bus 3.0 host Adapter, which complies
with Universal Serial Bus 3.0 Specification, and Intel’s extensible Host Controller Interface (xHCI). The
PTU-302 has PCI Express® bus interface, and it is applicable for PCI Express solution for host PC
system. PTU-302 works up to 5 Gbps for data transfer when connecting to USB 3.0 compliant
peripherals, while maintaining compatibility with existing USB peripheral devices.
PACKAGE CONTENTS
zUSB 3.0 PCI Express Card.
zDriver CD.
FEATURES
zCompliant with USB 3.0 specification Revision 1.0.
zSupports Low-speed (1.5 Mbps) / Full-speed (12 Mbps) / High-speed (480 Mbps) / Super-speed (5
Gbps).
zSupports 2 downstream ports for all speeds.
zSupports all USB compliant data transfer type as follows; Control / Bulk / Interrupt / Isochronous
transfer.
zCompliant with Intel’s extensible Host Controller Interface (xHCI) Specification revision 0.96.
zSupport USB legacy function.
zCompliant with PCI Express® Base Specification 2.0.
zSupports PCI Express® Card Electromechanical Specification Revision 2.0.
zSupports PCI Bus Power Management Interface Specification Revision 1.2.
zSupports external power socket in order to supplying power for each USB 3.0 Connector up to
900mA Max / port.
zCompatible with Windows XP / Vista / 7 and higher.
DRIVER INSTALLATION
NOTE : Install driver, before insertting the card to the computer.
1. Select NECEL-USB3-Host-Driver-1070Beta-Setup.exe to start Installation.

User’s Manual English
3-5
2. Click Next.
3. Tick I accept ……….. …..then Click Next.
4. Click Next , if install to default folder or click Browse to choose path.

User’s Manual English
4-5
5. Wait for installation to complete.
6. Click Finish to exit setup wizard.
7. Shut down computer.
HARDWARE INSTALLATION
1. Turn off your computer power.
2. Unplug the power cord and remove computer cover.
3. Remove the slot bracket of an available PCIe slot.
4. Carefully align the card to the selected PCIe slot and insert the card down firmly, but gently
untill it is well seated.
5. Replace the slot bracket’s holding screw to secure the card.
6. Connect the card with available power plug.
7. Replace the computer cover and reconnect the power.

User’s Manual English
5-5
VERIFY INSTALLATION
1. Right Click “ My Computer” then click “Manager” Click “Device Manager”.
2. Double click on the Universal Serial Bus controller option.
If you can find
zNEC Electronic USB 3.0 Host Controller.
zNEC Electronic USB 3.0 Root Hub.
You have successfully installed PTU-302.
SPECIFICATION
Specification PTU-302
Chips NEC
LED 2
Speed 1.5 / 12 / 480 Mbps & 5 Gbps
Compliant USB Spec 1.1 / 2.0 / 3.0
Connector Type A Female x 2
Power Mode Bus Power
Suport Windows XP / Vista / 7 and higher