Parkside PFMR 1600 C3 User manual

145 mm
IAN 383462_2107
PADDLE MIXER PFMR 1600 C3
PADDLE MIXER
Operation and safety notes
Translation of the original instructions
FESTÉK- ÉS HABARCSKEVERŐ
Kezelési és biztonsági utalások
Eredeti használati utasítás fordítása
MEŠALNIK ZA BARVO IN MALTO
Navodila za upravljanje in varnostna opozorila
Prevod izvirnih navodil
MÍCHAČ BAREV A MALTY
Pokyny pro obsluhu a bezpečnostní pokyny
Překlad původního návodu k používání
MIEŠAČ FARBY A MALTY
Pokyny pre obsluhu a bezpečnostné pokyny
Preklad pôvodného návodu na použitie
FARB- UND MÖRTELRÜHRER
Bedienungs- und Sicherheitshinweise
Originalbetriebsanleitung

GB Operation and safety notes Page 5
HU Kezelési és biztonsági utalások Oldal 20
SI Navodila za upravljanje in varnostna opozorila Stran 35
CZ Pokyny pro obsluhu a bezpečnostní pokyny Strana 51
SK Pokyny pre obsluhu a bezpečnostné pokyny Strana 66
DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 81

140 mm
B
A
D
E
C
F
6
5
3
4a
4b
2
4
3
6
5
8
7
6
4a
4b
2
2
1

5GB
Warnings and symbols used ....................................... Page 6
Introduction .......................................................... Page 6
Intended use............................................................ Page 6
Parts description......................................................... Page 7
Scope of delivery........................................................ Page 7
Technical data .......................................................... Page 7
Safety instructions................................................... Page 8
General power tool safety warnings ......................................... Page 8
Mixer safety instructions................................................... Page 11
Vibration and noise reduction .............................................. Page 12
Behaviour in emergency situations........................................... Page 12
Residual risks ........................................................... Page 12
Initial use ............................................................. Page 13
Unpacking ............................................................. Page 13
Accessories ............................................................ Page 13
Before use ............................................................ Page 13
Fitting the universal stirrer.................................................. Page 13
Removing and disassembling the universal stirrer ............................... Page 14
Operation............................................................. Page 14
Switching on/off (see Fig. E) ............................................... Page 14
Soft-start function ........................................................ Page 14
Speed pre-selection (see Fig. F)............................................. Page 14
Working with the mixer ................................................... Page 14
After use............................................................... Page 15
Cleaning and care ................................................... Page 15
Cleaning............................................................... Page 15
Maintenance ........................................................... Page 15
Repair................................................................. Page 15
Storage ............................................................... Page 16
Transportation .......................................................... Page 16
Troubleshooting...................................................... Page 16
Service ................................................................ Page 17
Disposal............................................................... Page 17
Warranty ............................................................. Page 18
Warranty claim procedure................................................. Page 18
Service ................................................................ Page 18
EC declaration of conformity....................................... Page 19

6 GB
Warnings and symbols used
The following warnings are used in this instruction manual, on the packaging and on the rating label:
Read the instruction manual.
Warning of general danger
Risk of electric shock
Wear eye protection! Wear ear protection!
Wear a dust mask! Wear protective gloves!
Wear protective, slip-resistant footwear! Protection class II (Double insulation)
Switch off the product and disconnect
it from the mains before replacing
attachments, cleaning and when not
in use.
Alternating current/voltage
Use in dry indoor rooms only.
Lock CE mark indicates conformity with
relevant EU directives applicable for this
product.
Unlock
PADDLE MIXER
Introduction
We congratulate you on the purchase of your
new product. You have chosen a high quality
product. The instructions for use are part of the
product. They contain important information
concerning safety, use and disposal. Before using
the product, please familiarise yourself with all
of the safety information and instructions for use.
Only use the product as described and for the
specified applications. If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it.
Intended use
This paddle mixer (hereinafter “product” or
“power tool”) is designed for mixing liquid and
powdered materials such as mortar, plaster,
adhesives and non-solvent paints, varnishes and
similar type of materials. The relevant mixing
action is dependent on the consistency, viscosity
of the materials and the quantity to be mixed.
A universal stirrer with appropriated rotational
speed setting will achieve best mixing effect.
Any other use or modification of the product
are considered improper use and can result in
hazards such as death, life-threatening injuries
and damage. The manufacturer is not liable
for any damages caused by improper use. The
product is not intended for commercial use or for
any other use.

7GB
Parts description
Figure A, C & F:
[1] Handle
[2] Assembly spanner
[3] Agitator shaft (with M14 internal thread)
[4] Universal stirrer
[] Spiral
[] Shaft
[5] ON/OFF switch
[6] Lock-off button
[7] Speed control button (increase speed)
[8] Speed control button (decrease speed)
Scope of delivery
1 Paddle mixer
1 Universal stirrer
2 Assembly spanners
1 Instruction manual
Technical data
Paddle mixer: PFMR 1600 C3
Rated voltage, frequency: 230–240 V∼, 50 Hz
Rated power: 1600 W
Rated no-load speed n0: 0–800 min–1
Stirrer fitting: M14
Stirrer headØ: 138mm
Weight (incl. accessories): 5.2 kg
Protection class: II /
Noise emission value:
Sound pressure level LpA : 83.5 dB(A)
Uncertainty KpA : 3 dB
Sound power level LWA : 94.5 dB(A)
Uncertainty KWA : 3 dB
mWARNING!
Wear ear protection!
NOTE
uUniversal stirrers [4] and other spiral []
shapes (with or without shaft []) are
available from your authorised dealer.
Specifications:
Outer diameter (spiral): ≤ 150 mm
Total length: ≤ 650 mm
Threaded connection: M14
NOTE
uThe sound emission values have been
obtained according to the noise test code
given in EN 62841-1. The noise for the
operator may exceed 80 dB(A) and ear
protection measures are necessary.
Vibration total value:
Work mode – vibration
emission value ah: <2.5 m/s2
Uncertainty K : 1.5 m/s2
mWARNING!
uThe vibration and noise emissions during
actual use of the power tool can differ
from the declared values depending on the
manner in which the tool is used, especially
what kind of workpiece is processed.
Try to minimise exposure to vibration and
noise. Examples of measures to reduce
vibration include wearing gloves when
using the tool and limiting working time. All
parts of the operating cycle must be taken
into account (e.g. times when the power
tool is switched off and when it is running
idle in addition to the trigger time).

8 GB
NOTE
uThe declared vibration total value and
the declared noise emission value have
been measured in accordance with a
standard test method and may be used for
comparing one tool with another;
uThe declared vibration total value and the
declared noise emission value may also
be used in a preliminary assessment of
exposure.
Safety instructions
General power tool safety
warnings
mWARNING!
uRead all safety warnings,
instructions, illustrations and
specifications provided with
this power tool. Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
1) Keep work area clean and well
lit. Cluttered or dark areas invite accidents.
2) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control.
Electrical safety
1) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
2) Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and
refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
3) Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of electric
shock.

9GB
4) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
5) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk
of electric shock.
6) If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock.
Personal safety
1) Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use a
power tool while you are tired or under the
influence of drugs, alcohol or medication. A
moment of inattention while operating power
tools may result in serious personal injury.
2) Use personal protective
equipment. Always wear eye
protection. Protective equipment such as
dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries.
3) Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to power
source and/or battery pack, picking
up or carrying the tool. Carrying
power tools with your finger on the switch or
energising power tools that have the switch
on invites accidents.
4) Remove any adjusting key or
wrench before turning the power
tool on. A wrench or a key left attached to
a rotating part of the power tool may result
in personal injury.
5) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool in
unexpected situations.
6) Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.

10 GB
7) If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use
of dust collection can reduce dust-related
hazards.
8) Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore tool
safety principles. A careless action can
cause severe injury within a fraction of a
second.
Power tool use and care
1) Do not force the power tool. Use
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
2) Do not use the power tool if the
switch does not turn it on and
off. Any power tool that cannot be
controlled with the switch is dangerous and
must be repaired.
3) Disconnect the plug from the
power source and / or the battery
pack from the power tool before
making any adjustments, changing
accessories, or storing power
tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
4) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained users.
5) Maintain power tools and
accessories. Check for misalignment
or binding of moving parts,
breakage of parts and any other
condition that may affect the power
tool’s operation. If damaged, have
the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
6) Keep cutting tools sharp and
clean. Properly maintained cutting tools
with sharp cutting edges are less likely to
bind and are easier to control.
7) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different from
those intended could result in a hazardous
situation.
8) Keep handles and grasping surfaces
dry, clean and free from oil and
grease. Slippery handles and grasping
surfaces do not allow for safe handling and
control of the tool in unexpected situations.

11GB
Service
1) Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Mixer safety instructions
1. Hold the tool with both hands at the
intended handles. Loss of control can
cause personal injury.
2. Ensure sufficient ventilation when
mixing flammable materials to avoid
a hazardous atmosphere. Developing
vapour may be inhaled or be ignited by the
sparks the power tool produces.
3. Do not mix food. Power tools and their
accessories are not designed for processing
food.
4. Keep the cord away from the
working area. The cord may be
entangled by the mixer basket.
5. Ensure that the mixing container is
placed in a firm and secure position.
A container that is not properly secured may
move unexpectedly.
6. Ensure that no liquid splashes
against the housing of the power
tool. Liquid that has penetrated the power
tool can cause damage and lead to electric
shock.
7. Follow the instructions and warnings
for the material to be mixed. Material
to be mixed may be harmful.
8. If the power tool falls into the
material to be mixed, unplug the
tool immediately and have the
power tool checked by a qualified
repair person. Reaching into the bucket
with the tool still plugged in can lead to
electric shock.
9. Do not reach into the mixing
container with your hands or insert
any other objects into it while
mixing. Contact with the mixer basket may
lead to serious personal injury.
10. Start up and run down the tool in the
mixing container only. The mixer basket
may bend or spin in an uncontrolled manner.
Additional safety instructions of
operating mixer
The power tool must never be used in
surroundings where an explosive atmosphere
exists.
Never mix any materials containing
flammable solvent or substance.
Make sure mixing stirrer is placed inside the
mixing container when power tool is switched
ON.
Make sure power tool is completely stopped
prior to taking out the stirrer from mixing
container.
Always wear safety goggles to operate the
power tool.
Do not wear loose-fitting clothes to operate
the power tool.

12 GB
Vibration and noise reduction
To reduce the impact of noise and vibration
emission, limit the time of operation, use low-
vibration and low-noise operating modes as well
as wear personal protective equipment.
Take the following points into account to minimise
the vibration and noise exposure risks:
Only use the product as intended by its
design and these instructions.
Ensure that the product is in good condition
and well maintained.
Use correct accessory tools for the product
and ensure they are in good condition.
Keep tight grip on the handles / grip surface.
Maintain this product in accordance with
these instructions and keep it well lubricated
(where appropriate).
Plan your work schedule to spread any high
vibration tool use across a longer period of
time.
Behaviour in emergency
situations
Familiarise yourself with the use of this product by
means of this instruction manual. Memorise the
safety warnings and follow them to the letter. This
will help to prevent risks and hazards.
Always be alert when using this product, so
that you can recognise and handle risks early.
Fast intervention can prevent serious injury
and damage to property.
Switch the product off and disconnect it from
the mains if there are malfunctions. Have the
product checked by a qualified professional
and repaired, if necessary, before you
operate it again.
Residual risks
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage remain. The
following dangers can arise in connection with the
structure and design of this product:
Health defects resulting from vibration
emission if the product is being used over
long periods of time or not adequately
managed and properly maintained.
Injuries and damage to property due to
broken accessory tools or the sudden impact
of hidden objects during use.
Danger of injury and property damage
caused by flying objects.
NOTE
uThis product produces an electromagnetic
field during operation! This field may under
some circumstances interfere with active or
passive medical implants! To reduce the risk
of serious or fatal injury, we recommend
persons with medical implants to consult
their doctor and the medical implant
manufacturer before operating this product!

13GB
Initial use
Unpacking
mWARNING!
uThe product and the packaging are not
children’s toys! Children must not play with
plastic bags, sheets and small parts! There
is a danger of choking and suffocation!
1. Unpack all parts and lay them on a flat,
stable surface.
2. Remove all packing materials and shipping
devices if applicable.
3. Make sure the delivery contents are complete
and free of any damage. If you find that parts
are missing or show damage do not use the
product but contact your dealer.
Do not use the product unless missing
parts have been delivered in addition or
defective parts have been replaced. Using an
incomplete or damaged product represents a
hazard to people and property.
4. Ensure that you have all the accessories and
tools needed for assembly and operation.
This also includes suitable personal protective
equipment.
Accessories
To operate this product safely and correctly, the
following accessories, i. e. tools and attachments,
are necessary:
Suitable personal protective equipment
Accessories and tools are available through
your authorised dealer. When buying always
consider the technical requirements of this product
(see “Technical data”).
If you are not certain, ask a qualified specialist
and get advice from your trusted dealer.
Before use
mWARNING!
uRisk of accident if the machine is operated
using electrical power supply that does
not match the specifications shown on the
rating label of the tool.
uThe mains voltage and the frequency of
the power source must correspond with the
specifications on the machine’s rating plate.
mWARNING!
Always switch the product off and
disconnect it from the mains before
performing inspections, installing
accessories or making adjustments!
Fitting the universal stirrer
Screw the shaft [] into the spiral []
completely (Fig. B).
NOTE
uYou do not need to fix the spiral [] to
the shaft [] very tightly. The product's
rotational motion securely tightens shaft
and spiral.
Then screw the assembled universal stirrer [4]
into the agitator shaft [3] completely (Fig. C).
Tighten the universal stirrer [4] firmly by using
assembly spanners [2] per rotational direction
(Fig. D).

14 GB
Removing and disassembling
the universal stirrer
Removing the universal stirrer [4] from
the agitator shaft [3]: Use the assembly
spanners [2] per rotational direction of
(follow the reverse steps of “Fitting the
universal stirrer” mentioned above).
Disassembling the spiral [] from the universal
stirrer [4]:
– Place oneassembly spanner [2] on the
hexagonal connector of the shaft [].
– Place the other assembly spanner on the
hexagonal connector of the spiral [].
– Hold the onespanner [2] firmly in place
while turning the other spanner in a
counter clockwise direction to loosen the
connection.
– Unscrew the spiral [] completely and
remove the spiral from the shaft [].
Operation
Switching on/off (see Fig. E)
Switching on:
Press and hold the lock-off button [6]. Then,
press the ON/OFF switch [5] and hold it in
position.
Switching off:
Release the ON/OFF switch [5].
Soft-start function
This product has electronically controlled
soft start function which enables the product
starting up smoothly to avoid a “kick-back”.
This function enhances safety and also
prevents the materials to be mixed from
spurting out of the mixing container.
Speed pre-selection
(see Fig. F)
The product's mixing speed can be adjusted to
different viscosities.
Before you start working: Adjust the rotational
speed according to the viscosity of materials
to be mixed:
Speed control
button
Rotational
speed
[7] Increase speed
[8] Decrease speed
NOTE
uThe universal stirrer [4] moves for a short
while after the product has been switched
off. Do not put aside the product until it
comes to a complete stop.
uAlways start from lowest speed setting.
Then increase the pre-selected speed until
the best mixing effect is achieved.
uYou can change the pre-selected speed
only while the product is connected to the
mains.
uEven after disconnecting the product from
the mains: The most recently speed
pre-selection stays in place until you set a
new speed.
Working with the mixer
Dip the universal stirrer [4] into the material
you want to mix.
Once the spiral [] is completely immersed in
the material you can switch the product on.
During mixing, move the universal stirrer [4]
through the mixing container and continue
mixing until the material is thoroughly mixed.

15GB
Upon switching the product off: Leave the
spiral [] in the material that you mixed until
the universal stirrer [4] comes to a complete
stop.
After use
1. Switch the product off. Disconnect the product
from the mains and let it cool down.
2. Check, clean and store the product as
described below.
Cleaning and care
mWARNING!
Always switch the product off,
disconnect it from the mains and let the
product cool down before performing
inspection, maintenance and cleaning
work!
Cleaning
The product must always be kept clean, dry
and free from oil or grease. Remove debris
from it after each use and before storage.
Regular and proper cleaning will help ensure
safe use and prolong the life of the product.
Inspect the product before each use for worn
and damaged parts. Do not operate it if you
find broken and worn parts.
Never allow fluids to get into the product.
Clean the product with a dry cloth. Use a
brush for areas that are hard to reach.
In particular clean the air vents after every
use with a cloth and brush.
Remove stubborn dirt with high pressure air
(max. 3 bar).
Remove the universal stirrer [4] from the
agitator shaft [3] (Fig. C, D). Clean the
universal stirrer with water.
Dry the universal stirrer [4] after cleaning and
spray a little anti-rust oil onto them before
storage.
NOTE
uDo not use chemical, alkaline, abrasive or
other aggressive detergents or disinfectants
to clean this product as they might be
harmful to its surfaces.
Maintenance
Before and after each use, check the product
and accessories (or attachments) for wear and
damage. If required, exchange them for new ones
as described in this instruction manual. Observe
the technical requirements (see “Technical data”).
Repair
This product does not contain any parts that can
be repaired by the user. Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired.

16 GB
Storage
Switch the product off and disconnect it from
the mains.
Clean the product as described above.
Store the product and its accessories in a
dark, dry, frost-free, well-ventilated place.
Always store the product in a place that is
inaccessible to children. The ideal storage
temperature is between 10 °C and 30 °C.
We recommend using the original package
for storage or covering the product with a
suitable cloth or enclosure to protect it against
dust.
Transportation
Switch the product off and disconnect it from
the mains.
Attach transportation guards, if applicable.
Always carry the product by its gripping
surface.
Protect the product from any heavy impact
or strong vibrations which may occur during
transportation in vehicles.
Secure the product to prevent it from slipping
or falling over.
Troubleshooting
mWARNING!
uOnly perform the steps described within
these instructions! All further inspection,
maintenance and repair work must be
performed by an authorised service centre
or a similarly qualified specialist if you
cannot solve the problem yourself!
Suspected malfunctions are often due to causes
that the users can fix themselves. Therefore check
the product using this section. In most cases the
problem can be solved quickly.
Problem Possible cause Solution
Product
does not
start.
Not connected to
power supply.
Connect to
power supply.
Power cord or plug
is defective.
Check by
a specialist
electrician.
Other electrical
defect to the
product.
Check by
a specialist
electrician.
Product
does not
reach full
power.
Power source
(e.g. generator) has
too low voltage.
Connect
to another
power source.
Air vents are
blocked.
Clean the air
vents.
Unsatis-
factory
result.
Accessory is worn. Replace with
a new one.
Accessory not
suitable for intended
operation.
Use suitable
accessory.

17GB
Service
mWARNING!
uHave your product repaired at the service
centre or an electrician, using only original
manufacturer parts. This will maintain the
safety of this product.
uIf the supply cord or plug is damaged, it
must be replaced by the manufacturer, its
service agent or similarly qualified persons
in order to avoid a hazard.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and
fibreboard / 80–98: composite
materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment.
The Triman logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when
it has reached the end of its useful
life and not in the household waste.
Information on collection points and
their opening hours can be obtained
from your local authority.

18 GB
Warranty
The product has been manufactured to strict
quality guidelines and meticulously examined
before delivery. In the event of product defects
you have legal rights against the retailer of this
product. Your legal rights are not limited in any
way by our warranty detailed below.
The warranty for this product is 3 years from the
date of purchase. The warranty period begins
on the date of purchase. Please keep the original
sales receipt in a safe location. This document is
required as your proof of purchase.
Should this product show any fault in materials
or manufacture within 3 years from the date of
purchase, we will repair or replace it – at our
choice – free of charge to you. This warranty
becomes void if the product has been damaged,
or used or maintained improperly.
The warranty applies to defects in material
or manufacture. This warranty does not cover
product parts subject to normal wear, thus
possibly considered consumables (e.g. batteries)
or for damage to fragile parts, e.g. switches,
rechargeable batteries or glass parts.
Warranty claim procedure
To ensure quick processing of your case, please
observe the following instructions:
Please have the till receipt and the item number
(IAN 383462_2107) available as proof of
purchase.
You will find the item number on the rating plate,
an engraving, on the front page of the instructions
for use (bottom left), or as a sticker on the rear or
bottom of the product.
If functional or other defects occur, please contact
the service department listed either by telephone
or by e-mail.
You can return a defective product to us free
of charge to the service address that will be
provided to you. Ensure that you enclose the proof
of purchase (till receipt) and information about
what the defect is and when it occurred.
Service
Service Great Britain
Tel.: [phone]
E-Mail: [email protected]

19GB
EC declaration of conformity

20 HU
Felhasznált figyelmeztető jelzések és szimbólumok............Oldal 21
Bevezető ..............................................................Oldal 21
Rendeltetésszerű használat ................................................Oldal 21
A részegységek leírása ...................................................Oldal 22
A csomagolás tartalma ...................................................Oldal 22
Műszaki adatok .........................................................Oldal 22
Biztonsági utasítások ...............................................Oldal 23
Általános biztonsági utasítások elektromos szerszámokhoz .......................Oldal 23
Biztonsági utasítások a keverőművekhez ......................................Oldal 26
A rezgés és a zaj csökkentése ..............................................Oldal 27
Teendők vészhelyzet esetén................................................Oldal 27
További kockázatok ......................................................Oldal 27
Mielőtt először használná ..........................................Oldal 28
Kicsomagolás...........................................................Oldal 28
Tartozékok .............................................................Oldal 28
Használat előtt.......................................................Oldal 28
Univerzális keverőfeltét felrögzítése ..........................................Oldal 28
Az univerzális keverőfeltét levétele és szétszerelése .............................Oldal 29
Kezelés................................................................Oldal 29
Be- és kikapcsolás (lásdaz Eábrát) .........................................Oldal 29
Lassú indítás ............................................................Oldal 29
A fordulatszám előzetes beállítása (lásdaz Fábrát) ............................Oldal 29
A festék- és habarcskeverő kezelése .........................................Oldal 29
Használat után..........................................................Oldal 30
Tisztítás és ápolás ...................................................Oldal 30
Tisztítás................................................................Oldal 30
Karbantartás ...........................................................Oldal 30
Javítás.................................................................Oldal 30
Tárolás . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Oldal 31
Szállítás ...............................................................Oldal 31
Hibaelhárítás.........................................................Oldal 31
Javítás ................................................................Oldal 32
Mentesítés ............................................................Oldal 32
Garancia ..............................................................Oldal 33
Garanciális ügyek lebonyolítása ............................................Oldal 33
Szerviz ................................................................Oldal 33
EK megfelelőségi nyilatkozat ......................................Oldal 34

21HU
Felhasznált figyelmeztető jelzések és szimbólumok
Ebben a használati útmutatóban, a csomagoláson és az adattáblán az alábbi figyelmeztető jelzések
láthatók:
Olvassa el a használati útmutatót.
Általános figyelmeztetések
Áramütésveszély!
Viseljen védőszemüveget! Viseljen fülvédőt!
Viseljen pormaszkot! Viseljen védőkesztyűt!
Viseljen csúszásmentes biztonsági cipőt! II.védelmi osztály (kettős szigetelés)
Alkatrészek cseréje és tisztítás esetén,
valamint ha nem használja, kapcsolja
ki a terméket és válassza le a hálózati
áramról.
Váltóáram/-feszültség
Csak beltéren, száraz helyiségekben
használja.
Húzza szorosra A CE-jelzés azt jelzi, hogy a
termék megfelel a rá vonatkozó EU
előírásoknak.
Lazítsa meg
FESTÉK- ÉS HABARCSKEVERŐ
Bevezető
Gratulálunk új termékének vásárlása alkalmából.
Ezzel a döntésével vállalatunk értékes terméke
mellett döntött. A használati utasítás ezen termék
része. A biztonságra, a használatára és a
megsemmisítésre vonatkozó fontos tudnivalókat
tartalmazza. A termék használata előtt ismerje
meg az összes használati és biztonsági
tudnivalót. A terméket csak a leírtak szerint és a
megadott felhasználási területeken alkalmazza.
A termék harmadik személy számára való
továbbadása esetén kézbesítse vele annak a
teljes dokumentációját is.
Rendeltetésszerű használat
Ez a festék- és habarcskeverő (később: „termék”
vagy „elektromos szerszám”) folyékony
vagy por állagú építkezési anyagok, például
festékek, ragasztók, mázak és hasonló anyagok
összekeverésére használható. A szükséges
univerzális keverőfeltét kiválasztása a megfelelő
keverőművelettel függ az anyag állagától
és mennyiségétől is. A legjobb keverőhatás
elérését egy univerzális keverőfeltét a megfelelő
fordulatszámmal képes elősegíteni.
A termék más használati módjai, módosításai nem
rendeltetésszerűnek minősülnek és életveszély,
sérülések és károk kockázatával járnak. A gyártó
nem vállal felelősséget a nem rendeltetésszerű
használatból eredő károkét. A terméket nem
üzleti felhasználásra, vagy egyéb alkalmazásra
szánták.