PASSAGES 6-Point Bamboo Coffin User manual

Continued on other side
4) Working at the foot, raise panels, place
them into the space between the locator
and the jute trim, align eyelets and firmly
insert each pin until it sits flush at the top
edge of the panel.
5) Repeat step 4 for each side of the coffin.
Package Contents:
1 Coffin, 6 Pins, 1 Lining, 1 Pillow.
Two-person assembly suggested.
2) Untie the binding jute
strap, then place internal mat,
lid, lining, pillow and
pins to one side.
Color code dots are
located under the
shoulder and leg
panels.
1) Remove the coffin from the box and
place it on a table or trolley.
3) Take the two loose shoulder
panels, set these according to
the color code dots:
Black goes to black,
green goes to
green, etc.
6-Point Bamboo Coffin Assembly Guide

Carrying the Coffin
If required, unhook the
handles for ease of carrying.
Pillow
Continued from other side.
8) Press the interior mat firmly into
place inside the coffin.
6) Pull the toggles to tighten
the string and lock the
toggles into place
as shown. Repeat
for each toggle.
Toggles may be
adjusted by twisting
the string.
7) Secure the handles in
place through the string
loops, pull the end of the
string inside the coffin to
tighten the loops.
9) Fit the lining inside
the coffin, pull the
drawstring at the foot
to tighten around the
frame and tie. Place
pillow as required.
10) lace the lid
and secure the straps
with the toggle and string.
Cloth Lining