Patiova varaMORA User manual

ASSEMBLY MANUAL
Side Table
VARAMORA.COM PATIOVA 2023 V1.0

2 |varaMORA End Table Assembly Manual
TOOLS INCLUDED
Allen Wrench
Getting Started
END TABLE PARTS
HARDWARE
Shelf Assembly (1)Table Top Assembly (1) Side Pieces (2)
1 ⁄" Bolts (8)

varaMORA End Table Assembly Manual |3
STEP 1
Begin the assembly by placing the table top face
down on a clean and flat surface.
STEP 2
Place the two table sides on either side of the table
top frame. The insert nuts on the side pieces need to
face IN to align with the holes on the frame.
STEP 3
Fasten each side piece to the table top frame using
two (2) 1 ⁄" bolts per side through the pre-drilled
holes.
STEP 4
Fasten both side pieces to the table top frame
before moving on to the next step.

4 |varaMORA End Table Assembly Manual
STEP 5
Place the shelf assembly between the side pieces and
align the four holes.
STEP 6
Fasten the shelf in place using four (4) 1 ⁄" bolts
through the pre-drilled holes.
STEP 7
Fasten both sides of the shelf before moving on to
the next step.
STEP 8
Check the fasteners to ensure that everything is
secure then set the side table upright and enjoy!

varaMORA End Table Assembly Manual |5
POLY MATERIAL
General Cleaning
Scrub boards with soap and water solution using a soft sponge or plastic bristled brush.
You can use a soft bristled toothbrush to clean spaces that are hard to reach.
To remove surface dust, hose furniture down with cold, clear water.
Deep Cleaning
A pressure washer can be used on the lightest setting to deep clean your furniture.
It is not recommended to use more than 1,500 psi. Keep the tip of the pressure washer at
least 10-12 inches from the furniture so it doesn’t damage the material.
For a list of specific stain removal, visit TangentMaterials.com.
Contact Us
Need help or have questions, we're happy to assist you. Call us at 610.857.1359 Mon-Fri 8am-5pm.
Care & Maintenance
The VaraMora Side Table is a great complimentary piece to any piece of VaraMora deep seating furniture.