PDi PD168-231 User manual

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
A Leader in Patient Communication
Solutions®
MODEL NUMBER:
PD168-231 Xbox One Mounting Kit
Document Number:
PD196-371R1
Installation Instructions
Page 1 of 2
Scope:
To install the PD168-231 Xbox One Mount to wall.
*This is only compatible with an Xbox One model.
Tool List:
1. Safety glasses/goggles
2. Screwdriver with spanner bit *Spanner bit supplied
Safety Steps:
1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.
Supplied Parts:
ITEM
QTY
PART NUMBER
DESCRIPTION
1
1
PD181-826
Xbox One Mounting Bracket
2
1
PD181-827
Xbox One Retaining Bracket
3
1
PD219-135
#6 Spanner Bit
4
4
PD209-088
#6-32 x ¼ Tamper-Resist Machine Screw Drilled Spanner
Procedure:
1. Locate the location on the wall for the Xbox One Mounting Kit. Using the figure below, drill and
install (4) dry wall mollies for mounting. *Dry wall mollies are customer supplied.
6.25”
2.14”
10.9”
2.71”
8.5”
13.9”

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
A Leader in Patient Communication
Solutions®
MODEL NUMBER:
PD168-231 Xbox One Mounting Kit
Document Number:
PD196-371R1
Installation Instructions
Page 2 of 2
2. Place the PD181-826 mounting bracket on the wall
over the mollies and install in place using (4)
screws. *Screws provided by customer.
3. Place the Xbox One (not supplied with bracket) into
the PD181-826 paying attention to the locating
pins (see side view below).
4. Paying attention to the locating pins, place the
PD181-827 retaining bracket, over the Xbox One
assembly and attach with (4) PD209-088 screws to
secure the Xbox.
5. Place the Xbox power brick into the mount and make
necessary power connections.
Side View
Locating Pins
Xbox Power
Brick
PD209-088
PD181-827
PD181-826