
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Your Source for Healthcare and
Wellness Infotainment™
MODEL NUMBER:
PD251-026 Bottom Mount DVD Kit For
29” and 32” LED TV
Document Number:
PD196-280R4
Installation Instructions
Page 1 of 2
SCOPE:
To install a bottom mount DVD bracket to a 29” or 32” wall mounted LED TV using a PDI wall mount kit (not
included).
TOOL LIST:
1. Safety glasses/goggles
2. P1 or P2 Phillips screwdriver
SAFETY STEPS:
1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.
SUPPLIED PARTS:
ITEM QTY PART NUMBER
DESCRIPTION
1
4
PD242-658 NYLON SPACER
2
1
PD181-773 ADAPTER BRACKET
3
4
PDIPPHMSM6X125 M6-1X25MM SCREWS FOR 32” TV
4
1
PD181-770 DVD MODULE BRACKET
5
1
PDISEMSM3X55 M3-.5X5MM SCREWS
6
2
PDIPPHMSM4X76 M4-.7X6MM SCREWS
7
1
PD106-776R 15 TO 26 PIN 36”
8
4
PDIPPHMSM5X825 M5-.8X25MM SCREWS FOR 29” TV
Note: Items 3 or 8 will be used according to size of TV
PROCEDURE:
STEP 1:
Attach the wall mounting plate (from separately purchased
kit) to the TV placing four PD242-658 spacers (1) between
plate and TV. Secure with two PDIPPHMSM6X125 (3) or
PDIPPHMSM5X825 (8) screws on the right side. See
chart for appropriate sizes.
STEP 2:
Position PD181-773 DVD ADAPTER bracket (2) over
mounting plate and spacers on left side and attach with
remaining two screws as pictured. Tighten all four
PDIPPHMSM6X125 (32” TV) or PDIPPHMSM5X825 (29”
TV) mounting screws.
STEP 3:
This bracket is a new design. The DVD player must be securely attached to the bracket before
attaching the bracket to the TV assembly. The DVD player will fall if screw is not secured.
Slide DVD player (purchased separately) through tabs
on DVD mounting bracket PD181-770 (4) as shown.
Secure with PDISEMSM3X55 screw (5).