PDi PD168-027 User manual

Better Solutions Are Within Reach®
MODEL NUMBER:
PD168-027
Document Number:
PD196-122R2
Mount for Apple Mini®
Page 1 of 2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Assemble the mount as pictured below.
1) Place the Apple Mini (1) into the Mini Mount Cover (5).
2) Hook the bottom lip of the Mini Mount Cover (5) into the "U" flange at the bottom of the Mini Mount Base (6) and
tilt into position until the studs near the top of the Mini Mount Base (6) stick thru the slotted mounting holes in
the top lip of the Mini Mount Cover (5).
3) Install two PDINILN832 (2) nuts onto the two studs and tighten to secure the Apple Mini.
4) Attach the Mini Mount PS Socket (4) to the side of the Mini Mount Base (6) as pictured,
using two PDIPFHMS63225 (7) screws.
Parts List
ITEM
QTY
PART NUMBER
DESCRIPTION
1
1
Apple Mini
2
2
PDINILN832
8-32 NYLOC
4
1
PD133-041
Mini Mount PS Socket
5
1
PD133-040
Mini Mount Cover
6
1
PD133-039
Mini Mount Base
7
2
PDIPFHMS63225
6-32 X 1/4 PFHMS

Better Solutions Are Within Reach®
MODEL NUMBER:
PD168-027
Document Number:
PD196-122R2
Mount for Apple Mini®
Page 2 of 2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Mount assembly to wall using the bottom two bolts of the wall bracket as pictured. Place mount between wall and bottom
of wall bracket casting. Tighten mounting bolts as normal.
Place power supply into holder as pictured. Plug power cord into power
supply thru hole in bottom of power supply holder. Make remaining
connections following instructions supplied with APPLE MINI.