PDi PD168-051 User manual

Better Solutions Are Within Reach
®
MODEL NUMBER:
PD168-051 100mm x 200mm
Document Number:
PD196-269R3
Wall Mount Installation Instructions
Page 1 of 3
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Scope:
To install the PD168-051 wall mount kit to a PDi ELED television.
Tool List:
1. Safety glasses/goggles
2. P1 or P2 Phillips screwdriver
3. Level
4. 1/4” hex bit driver
Safety Steps
1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for existing products.
Installation Procedure:
1. Select a location on the wall approximately 4 inches mounting distance for plastic 29” TV,
approximately 7 inches mounting distance for plastic 32” TV, and approximately 9 inches
mounting distance for metal 32” TV. Position PD181-697 bracket, level, and locate two
mounting holes. Secure the bracket to the wall (mounting hardware is not included). (Fig. 1)
2. Attach PD181-596 bracket to PD181-677 adapter plate using (4) each PDIPPHMSM4X76 screws
and #10 internal tooth lock washers. (Fig. 2)
Qty
Part Number
Description
1
PD181-596
100mm Mounting Bracket to LCD
1
PD181-677
100mm x 200mm Adapter Plate
1
PD181-697
Vertical Wall Mount Bracket
1
PD196-269
Installation Instructions
2
PD218-001
8” ty-wrap
1
PD219-020
Tamper Resistant Hex Bit
2
PDIPPBHSCS103250
Pilfer Proof 10-32 x 1/2 Button Head Socket Screw
4
PDIPPHMSM4X76
M4 x .7 x 6mm Long Phillips Head Screw
4
PDIITLW10
#10 Internal Tooth Lock Washer
4
PDIPPHMSM5X810
M5 x .8 x 10mm Long Phillips Head Screw
4
PDIPPHMSM6X110
M6 x 1 x 10mm Long Phillips Head Screw
4
PDIPPHMSM6X18
M6 x 1 x 8mm Long Phillips Head Screw
4
PDIFW10
#10 Flat Washer
4
PDIPPHMSM4710
M4 x .7 x 10mm Long Phillips Head Screw
Parts List
Fig. 1
The PDIFW10 AND
PDIPPHMSM4710
washers and screws
are included to be used
if this adapter plate is
being paired with a TV
that requires M4
mounting screws.

Better Solutions Are Within Reach
®
MODEL NUMBER:
PD168-051 100mm x 200mm
Document Number:
PD196-269R3
Wall Mount Installation Instructions
Page 2 of 3
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
3. Secure PD181-677 adapter plate to TV using:
(4) PDIPPHMSM5X810 screws for 29” TV or
(4) PDIPPHMSM6X110 screws for 32” plastic or
(4) PDIPPHMSM6X18 screw for 32” metal TV
(Fig. 3)
4. Mate the PD181-596 mounting bracket to PD181-697 bracket on wall using (2)
PDIPPBHSCS103250 pilfer proof button head socket screws. Make sure the pivot bolts are
retained in the “L” shaped slot (Fig. 4)
Fig. 3
Fig. 4
29” plastic TV
32” plastic TV
32” metal TV
PDIPPHMSM5X810
PDIPPHMSM6X110
PDIPPHMSM6X18

Better Solutions Are Within Reach
®
MODEL NUMBER:
PD168-051 100mm x 200mm
Document Number:
PD196-269R3
Wall Mount Installation Instructions
Page 3 of 3
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
5. The TV’s tilt can be adjusted by loosening both Pilfer Screws, adjusting tilt, and then tightening.
7.07
4.42
3.85
6.30
29” plastic TV
32” plastic TV
32” metal TV
4.63
6.39