Vivo DESK-V000K-M1 User manual

Black Desk Riser with Single Monitor Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v000k-m1
SKU: DESK-V000K-M1
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
A (x1)
Column
B(x1)
VESA Plate
C(x1)
Bracket
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x1)
Stand Base
E(x1)
M8x55
F (x1)
Support Plate
G(x2)
M6x16
H (x4)
Rubber Pad
J (x1)
Thumbscrew
M-A (x4)
M4x12
M-B (x4)
M5x12
M-C (x4)
D5 Washer
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
I (x1)
Stand Cable Clip
K (x1)
4mm Allen
Wrench
L(x1)
6mm Allen
Wrench
M (x1)
Desk
O (x2)
Cable Clip
N (x1)
Keyboard Tray
P (x3)
Pad
Q(x4)
Sleeve Nut with
Bolt
R (x4)
Rubber Foot

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
17.6lbs
(8 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
STEP 2
SCREEN
Separate the sleeve nut w/ bolt (Q) into Q1 and Q2.
Press Q1 into holes on top of keyboard tray (N). Apply pads (P) to underside of keyboard tray.
33lbs
(15kg)
DESKTOP
4.4lbs
(2kg)
KEYBOARD TRAY
STEP 3
Cut the large plastic tie beneath desk (M). Install the rubber feet (R) to the base of the desk.

4
STEP 4
STEP 5
Raise the desk by squeezing the handles underneath the desk.
Place keyboard tray (N) on metal brackets on desk (M). Secure keyboard tray to brackets
using screws (Q2) and tighten with a Phillips screwdriver.
STEP 6
Apply cable clips (O) to underside of desk.

5
STEP 7
STEP 8
Assemble column (A) to stand base (D) using M6x16 bolts (G) and tighten with the 4mm Allen wrench
(K). Apply rubber pads (H) to underside of base.
Remove plug from desk surface (M).
Position the assembled column with
base over the grommet hole, and
install to desktop using the M8x55 bolt
(F) with support plate (F). Tighten
using the 6mm Allen wrench (L).
STEP 9
Slide stand cable clip (I) and bracket (C) down onto column (A) to the desired height and
tighten with the 6mm Allen wrench (L).

6
STEP 10
STEP 11
Install the VESA plate (B) to monitor using bolts (M-A or M-B) and washers (M-C).
Slide the VESA plate (B) with monitor onto the bracket (C). Secure using the thumbscrew (J).
STEP 12
If needed, adjust tilt joint support using the 6mm Allen wrench (L). Use the stand cable clip (I) to
organize cables.

7
STEP 13
Store Allen wrenches (K, L) in the stand cable clip (I) when not in use.
STEP 14
Adjust desk height by squeezing the handle and pulling up or pushing down. Adjust monitor position
and rotation as desired.

LAST UPDATED: 09/15/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303