Trinity ECOSTORAGE TBFZ-0905 User manual

OWNER’S MANUAL
TRINITY ECOSTORAGE™ 4-TIER NSF 48" x 18" x 72"
WIRE SHELVING RACK w/WHEELS –CHROME
Model # TBFZ-0905
Everything in its place.®

© 2017 TRINITY - 800.985.5506
Your TRINITY EcoStorage™ 4-Tier Wire Shelving Rack w/Wheels should include the following parts.
Please inspect box contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or [e-mail]. Parts can also be requested online at
www.trinityii.com (Help & More, Contact Us).
You will need no additional tools for assembly.
PARTS LIST
AB
SHELF (4)
C
D
1
SLIP SLEEVE
(32) + (2) extra
Please inspect box contents to ensure you have received all components.
Note: The black circular plastic tops in between the Shelves are used only for packaging purposes. They
are NOT NEEDED. Please discard.
E
BACKSTAND (4)
FG
CASTER (w/wrench)
(2 locking, 2 non-locking)
For mobile option
FEET LEVELER (4)
For stationary option
TOP POLE (4)
End Cap (4) and
Pole Connector (4)
are pre-installed
BOTTOM POLE (4)
Threaded Insert (4)
is pre-installed

A (4)
© 2017 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
2
STEP 2: SLIP SLEEVES
Screw each FEET LEVELER (G) into the bottom of
each BOTTOM POLE (A). Turn clockwise to screw
in place.
STEP 1: Mobile Option
Screw each CASTER (F) into the bottom of each
BOTTOM POLE (A). Turn clockwise to screw in
place. Make sure the Locking Casters are on the
same side.
Use the provided caster wrench to tighten
completely. Failure to do as instructed could
result in the caster stem breaking.
For easiest assembly, do not attach the TOP (B) and
BOTTOM (A) POLES until instructed. Once connected,
these will be the posts for the Rack.
Note that each POLE (A+B) has slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (D) has
raised horizontal lines inside designed to lock them in
place on the POLE (A+B).
On the BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (D)
at the desired level. Please make sure the arrow faces up
and that the word “TOP” is right side up. Do this for each
BOTTOM POLE (A) and make sure that the heights are
identical for BOTTOM POLE (A).
Slide the pair of SLIP SLEEVES (D) until you hear a click to
confirm the pair is locked onto the BOTTOM POLE (A). DO
NOT place more than one pair on each POLE (A) at a time.
STEP 1: Stationary Option
A (4) D (8)
F (4) G (4)
* For safety and stability, the lowest SHELF (C) should be lower than the 3rd notch from the bottom.
** Note: There will be a very small gap in-between the SLIP SLEEVES (D)—this is normal.

© 2017 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
3
STEP 3: INSTALLING BOTTOM SHELF
Place SHELF (C) on its side and slide the (4)
BOTTOM POLES (A) through the holes in the
SHELF (C). Make sure that the SHELF (C)
corner cylinders are positioned over the SLIP
SLEEVES (D).
Stand the unit upright.
*Note: The level side of the SHELF (C) is the
TOP side (the TRINITY logo on the corner
cylinders should be right-side up.)
**Use a rubber mallet, if needed, to secure
the SHELF (C).
C (1)
STEP 4: INSTALLING SHELVES
On POLE (A), place 1 pair of SLIP SLEEVES (E) at the desired
distance between SHELVES (C). Please make sure the arrow
faces up and that the word “TOP” is right side up. Do this for
each POLE (A), and make sure that the heights are identical
for each POLE (A).
Lower SHELF (C) over the BOTTOM POLES (A) so that the
corner cylinders of the SHELF (C) are positioned over the SLIP
SLEEVES (D).
Repeat Step 4 to install other SHELVES (C) as desired.
**Use a rubber mallet, if needed, to secure the SHELVES (C).
D (8) C (1)

ASSEMBLY INSTRUCTIONS
STEP 6: INSTALLING SHELVES
© 2017 TRINITY - 800.985.5506 4
D (16) C (2)
Screw the TOP POLE (B) into the BOTTOM POLE
(A). The tops of these poles are indicated by the
BLACK END CAP.
STEP 5: INSTALLING TOP POLES
B (4)
On POLE (A+B), place 1 pair of SLIP SLEEVES (D) at the desired
distance between SHELVES (C). Please make sure the arrow
faces up and that the word “TOP” is right side up. Do this for
each POLE (A+B), and make sure that the heights are
identical for each POLE (A+B).
Lower SHELF (C) over the TOP POLES (B) so that the corner
cylinders of the SHELF (C) are positioned over the SLIP
SLEEVES (D).
Repeat Step 6 to install other SHELVES (C) as desired.
**Use a rubber mallet, if needed, to secure the SHELVES (C).

5© 2017 TRINITY - 800.985.5506
Center the BACKSTAND (E) along
the back of the SHELF (C). Insert
the bent foot of one end of the
BACKSTAND (E) and anchor on the
inside of the back wire of the
SHELF (C). Once the bent foot is
inside the back wire, pull
BACKSTAND (E) out, away from
the Rack until the straight foot locks
on the outside of the back wire.
Repeat for the 2 other BACKSTAND
(E) anchors.
STEP 7: INSTALLING BACKSTANDS
E (4)
ASSEMBLY INSTRUCTIONS

© 2017 TRINITY - 800.985.5506 6
TRINITY Customer Service provides the following replacement parts:
SERVICE PARTS LIST –TBFZ-0905
Part Number Description Part Number Description
1) XBK-01-011-2543 Slip Sleeve 7) ZSV-99-007-4010 Non-locking Caster
2) ZSV-04-006-3600 Top Pole 8) XXX-97-002-0001 Wrench
3) ZSV-01-013-2523 Pole Connector 9) XBK-23-004-2517 Endcap
4) ZSV-04-008-3600 Bottom Pole 10) ZSV-03-007-4818 Shelf
5) ZSV-99-008-4010 Locking Caster 11) ZSV-02-006-0001 Back Stand
6) XBK-98-003-2538 Feet Leveler
2
1
3
4
5
6
8
7
10
11
9

WARNINGS
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. Use the provided caster wrench to tighten casters completely. Failure to do as instructed
could result in the caster stem breaking thereby causing the shelving rack to collapse.
3. The warnings, cautions, and instructions discussed in this manual cannot cover all
possible conditions or situations that may occur. The user must always be aware of their
environment and ensure that they use the product in a safe and responsible manner.
4. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product.
5. Check for damaged parts.Before using this product, carefully check that all parts are in
good condition, and that the product will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation
of this product. Replace damaged or worn parts, and never use this product with a damaged
part.
6. Do NOT overload the product.
CARE AND MAINTENANCE
•Avoid harsh, abrasive cleaners, and other corrosive chemicals
•This item is not certified for outdoor use
Weight capacity per Shelf on Feet Levelers 800 lb (evenly distributed)
Weight capacity per Shelf on Casters 200 lb (evenly distributed)
Total weight capacity of Shelving Rack
(evenly distributed)
3200 lb (on Feet Levelers)
800 lb (on Casters)
7© 2017 TRINITY - 800.985.5506

Thank you for purchasing a TRINITY EcoStorage™ 4-Tier NSF Wire Shelving Rack w/Wheels.
In order to register your product and receive streamlined customer service, please fill out the
following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the
Product Registration Form online at www.trinityii.com or (3) scan and email the form to
[e-mail]. Include a copy of your original receipt with your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: TBFZ-0905 Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
PRODUCT REGISTRATION
© 2017 TRINITY - 800.985.5506 8

© 2017 TRINITY - 800.985.5506
9