1 Introduction
The PCAN-MicroMod FD plug-in board can be purchased together with ready-to-use
motherboards that provide peripherals for specific requirements. For the connection
of CAN, I/O, and power supply, spring terminal connectors are used.
The motherboard PCAN-MicroMod FD Analog 1 puts the emphasis on analog inputs
and outputs which are provided with appropriate protective circuitry. The digital
outputs of Digital 1 are equipped with low-side switches and those of Digital 2 with
high-side switches.
The PCAN-MicroMod FD is configured using the supplied Windows software. In addi-
tion to simple I/O mapping to CAN IDs, function blocks are also available for
processing the data. The configuration created on the computer is transferred via
the CAN bus to the PCAN-MicroMod FD which then runs as an independent CAN node.
Multiple modules can be configured independently on a CAN bus.
1.1 Properties at a Glance
Motherboard in General
Board with plugged on PCAN-MicroMod FD
Aluminum casing with spring terminal connectors
Operating voltage 8 to 30V
Extended operating temperature range from −40 to 85°C (−40 to 185 °F)
1 Introduction PCAN-MicroMod FD Digital1/2
User Manual 1.1.0 © 2020 PEAK-System Technik GmbH
4
