Peakeep MHP-3112 User manual

ALARM MIN HOUR
YEAR 12/24 DATE/ C/ F MONTH
ON OFF
SENSOR
LOCK
AL.SET
DATESET
TIMESET
MON-TO -FRI
MON-TO -SAT
AL.ON
AL.OFF
K1
K6 K7
K2 K3 K4 K5
Dimensions: 5.4*1.8*3 inch / 13.8*4.7*7.8CM
G Weight: 0.4lb./0.18KG
Clock Inaccuracy: ±3 seconds/month (in normal temperature)
Power supply: 3 PCS 1.5V AAA alkaline batteries (Not included)
Tips: for better performance, replace batteries every 6 months.
Instructions
MHP 3112
K1-Alarm switch(4 modes)
K2-Year setting
-Military Time/ Regular Time converting
K3-Minute setting
-Date setting
-Celsius/Fahrenheit converting
K4-Hour setting
-Month setting
K5-Setting mode switch
K6-Sensor switch
K7-Battery compartment
Product Specifications
1. Remove the battery compartment cover from the back of the unit, place the cord on the bottom of the battery
to gain easy access to remove batteries when replacing. Show as “FIG 1”
Getting Started
ALARM MIN HOUR
YEAR 12/24 DATE/ C/ F MONTH
ON OFF
SENSOR
LOCK
AL.SET
DATESET
TIMESET
MON-TO-FRI
MON-TO-SAT
AL.ON
AL.OFF
AAA
FIG 1
2. Properly align and insert 3 AAA alkaline batteries, replace cover.
Setting Clock Time
1. Toggle setting mode switch to TIME SET position.
2. The factory default time of AM 12:00 starts to blink. Refer to the circled portion of “FIG 2”.
1/5

Setting Clock Date
Setting Alarm
FIG 2
M
O
N
T
O
F
R
I
1
2
TEMP MONTH DATE DAY AM ALARM
AM
3. Set current time with HOUR and MIN buttons.
4. When the current time is displayed, toggle setting model switch to LOCK position. The current time display will
stop blinking.
Tips: When you set the minute with MIN button, the seconds' timer re-sets to zero.
2/5
1. Toggle setting mode switch to DATE SET position.
2. The factory default date of 1/1/2015 starts to blink. Refer to the circled portion of “FIG 3”.
1
2
TEMP MONTH DATE DAY AM ALARM
FIG 3
3. Set todayʼs date with MONTH, DATE and YEAR buttons.
4. When todayʼs date is displayed, toggle setting mode switch to LOCK position. The todayʼs date display will
stop blinking.
Tips: You donʼt have to set the day of the week, it auto-matches with the date.
1. Toggle setting mode switch to AL.SET position.
2. The symbol of alarm 1 displays on the right of current time. The factory default alarm 1 time of AM 6:00 starts
to blink. Refer to the circled portion of “FIG 4”.
1

6. Press ALARM button to enter alarm 2 time settings. The symbol of alarm 2 displays on the right of current time.
The factory default alarm 2 time of PM 12:00 starts to blink. Refer to the circled portion of “FIG 7”.
3/5
2
AM 1
M
O
N
T
O
F
R
I
TEMP MONTH DATE DAY AM ALARM
FIG 4
3. Set alarm 1 with HOUR and MIN buttons.
4. When your desired alarm 1 time is displayed, press ALARM button to turn on alarm 1 while “ON” starts to blink.
Refer to the circled portion of “FIG 5”.
AM 1
TEMP MONTH DATE DAY
FIG 5
5. Press HOUR button repeatedly to independently control alarm 1 time between “OFF” and “ON”. Refer to the circled
portion of “FIG 6”.
FIG 6
AM 1
TEMP MONTH DATE DAY
AM 1
TEMP MONTH DATE DAY
2
TEMP MONTH DATE DAY PM ALARM
AM
FIG 7

1. Toggle alarm switch to AL.ON position. Alarm wakes you every day. If you control the dual alarm both on,
the alarm symbols display on the right of the current time. Refer to the circled portion of “FIG 9”. If you
control the second alarm off, only alarm 1 symbol displays on the right of the current time. Refer to the circled
portion of “FIG 10”.
Selecting Alarm Mode
4/5
1
1
7. Repeat steps 3-5 to set alarm 2 time and independently control alarm 2 on or off. Refer to the circled portion
of “FIG 8”.
FIG 8
2
AM
TEMP MONTH DATE DAY
2
TEMP MONTH DATE DAY
AM
8. After controlling alarm 2 on or off as per you require, toggle setting switch back to LOCK position.
2
FIG 10
1
TEMP MONTH DATE DAY AM ALARM
AM
FIG 9
1
2
TEMP MONTH DATE DAY AM ALARM
AM
2. Toggle alarm switch to MON-TO-SAT position. Alarm only wakes you from Monday to Saturday. The indicator
of “MON-TO-SAT” displays on the right of the screen. Refer to the circled portion of “FIG 11”.
FIG 11
M
O
N
T
O
S
A
T
1
2
TEMP MONTH DATE DAY AM ALARM
AM
3. Toggle alarm switch to MON-TO-FRI position. Alarm only wakes you from Monday to Friday. The indicator
of “MON-TO-FRI” displays on the right of the screen. Refer to the circled portion of “FIG 12”.
FIG 12
M
O
N
T
O
F
R
I
1
2
TEMP MONTH DATE DAY AM ALARM
AM

Turning Alarm off
Light Function
Converting Regular/Military Time
Converting Celsius/Fahrenheit
Troubleshooting
5/5
4. Toggle alarm switch to AL.OFF, the alarm will no longer work. The alarm symbols will not display.
When alarm goes off, gradually accelerated beep sounds for 1 minute.
1. Press the top SNOOZE button to temporarily suspend the alarm for 8 minutes.
2. Press any backside buttons of ALARM/MIN/HOUR to turn alarm off; or let the alarm automatically turn off after
sounding for 1 minute. Either of the two re-sets the alarm for the next day.
1. Temporary Bright Backlight
Push the top LIGHT button, clock glows high backlight and stays for 5 seconds.
2. Smart Nightlight
Toggle the SENSOR switch to ON, clock automatically gives off low glow in dark.
Tips: If being disturbed by the nightlight at sleeping time, please turn off sensor switch.
Ensure setting mode switch at LOCK position, press YEAR 12/24 button to convert time format between Regular
Time (12-hour) and Military Time (24-hour).
Tips: In regular time, AM or PM will display. Otherwise, clock is in Military Time.
Ensure setting mode switch at LOCK position, press DATE/ ºC/ ºF button to convert temperature unit between
Celsius and Fahrenheit.
If you encounter problems using this unit, check the following points, request service at [email protected]
via your order before leaving a feedback/review, or contact Amazon Customer Service. It is our intent to ensure
all problems are resolved.
1. Clock does not display
Ensure batteries are placed properly
Check that there is power to the batteries
Remove and replace the batteries back in
2. Day of the week does not match the date correctly
Ensure you set the year at correct year (refer to the breakdown steps of “setting clock date”)
3. Single alarm function
Independently control one set alarm off (refer to the breakdown steps of “setting alarm”)
4.Alarm does not work
Ensure setting mode switch is toggled to LOCK position
Ensure the alarm symbols display (refer to FIG 9, FIG 10)
When setting current time and alarm time, be careful to select AM or PM if in Regular Time, as appropriate,
by monitoring the AM or PM displays.
Thank you. Have a fantastically glorious day!