Pearller HY1060MBT User manual

www.pearller.com
Instruction manual
HY1060MBT
P.A. system Amplifier

32
Thank you for choosing
Pearller brand
The Pearller product you have purchased is the result of careful planning by specialized engineers. High quality
materials were used for its construction, to ensure its functioning over time. The product is manufactured in
compliance with the strict regulations imposed by the European Union, a guarantee of reliability and safety.
We suggest to read this manual carefully before starting using the device in order to take advantage of its full
potential.
Hoping that you will be satisfied of your purchase, we thank you again for your trust in our brand and we invite you
to read our website www.pearller.com where you will find the whole range of Pearller products, along with useful
information and updates.
This amplifier has been designed for “P.A. system“ purposes. It is used for example in offices, schools,
churches, shops, shopping centers, restaurants, convention centers, auditoriums, etc.
Its advanced protection systems prevent damages caused by short circuits, overheating and overloads and
make it safe and reliable.
It comes with 2 microphone inputs, 1 line input, 1 phone input and speaker terminals both for 4/8 Ohm and
70/100V operation.
It is provided with Mp3 module for music track playback, tuner and bluetooth receiver to connect smartphones
or tablets.

32
Shipments and complaints
When purchasing or receiving the product, open the box and carefully check the content to make sure that all
parts are present and in good condition. Immediately notify the seller of any transport damage suffered by the device. If
you send the product for repair, it must be shipped with complete original packaging: we therefore recommend to keep it
along with invoice or the purchase receipt.
Cautions and warnings
• Read carefully the instructions given in this manual and follow them strictly.
• Keep this manual for future reference and include it if you give the product to another user.
• This device works with dangerous 230V mains power. Do not open, do not disassemble and don’t try to operate
inside. In case of wrong use an electric shock may occur.
• Contact a specialized technician for the installation.
• Always make sure to connect the device to a power outlet with the correct voltage.
• Avoid using the unit: in places with temperatures above 35°C, or in places exposed to rain, humidity, impacts and
vibrations.
• Do not allow flammable liquid, water or objects to enter the product.
• Install the product in a ventilated position, far from heat sources and don’t obstruct the air vents.
• In the event of a serious operating problem, stop using the product immediately. Never try to repair it by yourself, but
contact the authorized technical service center. Repairs carried out by unskilled persons could lead to serious damages
both to the fixture and to people.
• Disconnect the unit from power when it is not used.
• Wait for the product to cool before cleaning or maintenance.
• If the product doesn’t turn on, check the fuse and if necessary replace it with one of the same type and rating, after
disconnecting the fixture from power.
• Do not turn the product on and off at short intervals, it may reduce the life of the device.
• Never disconnect the product from the power source by pulling on the cord.
• Periodically check the condition of the power cord.

54
+
-Total = 16Ω
4Ω 4Ω 4Ω 4Ω +
-
Total = 4Ω
16Ω 16Ω 16Ω 16Ω
Total= 4Ω with 400W total power
2 speakers x
8 Ω= 16 Ω
4 speakers x
4 Ω= 16 Ω
2 speakers x
8 Ω= 16 Ω
16 Ω
8Ω 4Ω 8Ω
8Ω
4Ω
4Ω
4Ω
100
W
50
W
25
W
8Ω
50
W
25
W
25
W
25
W
50
W
50
W
Before making any connection, be sure that the unit is unplugged from the power outlet.
All connections must be made with the appliance turned o.
Impedance speaker connection
This type of connection does not allow to limit individually the power of each single speaker, but it gives the possibility to
obtain higher performances. The main rule to be respected is that the total impedance of the speakers must be
compatible with the impedances supported by the amplifier where the speakers will be connected (4-8 Ω). If you use
more than one speaker, the value of impedance will be added up (in case of series wiring) or divided (in case of parallel
wiring).
If you connect only one speaker you have to consider the impedance of the speaker itself. Mixed connections are also
possible. Below are two examples:

54
Constant voltage speaker
connection
It is the type of monophonic system realized in shops, conference rooms, churches and in any place where a
uniform sound reinforcement is necessary, with maximum ease of installation and use. Only 2 wires are
used, starting from the amplifier and getting up to the last speaker. On the amplifier you have to connect a wire
to the “com” (common) terminal and the other wire to the 100V terminal.
The two wires will go all around the installation, and they will be connected to the speakers or rather the
transformers each speaker is equipped with.
100V
com
15W 20W
30W5W
20W
60W Amplier
EXAMPLE: You connect to the system 5 speakers for
a total of 90W. The amplier handles up to 110W: so in
the future you will be able to connect other speakers,
up to reach the amplier’s maximum power.

76
Front
Back
Remote Control
MODE
EQ
100+
VOL-
7 8 9
4 5 6
1 2 3
0
VOL+
+
PREV NEXT PLAY/PAUSE
USB 26:26 USB AUX
SD
M
ECHO
MIN MAX
MIC 2
MIN MAX
BASS
-10dB +10dB
TREBLE
-10dB +10dB
MIC 1
MIN MAX
TIME
MIN MAX
LINE 2
MIN MAX
LINE 1
MIN MAX
MIN MAXVOL
Model: PAA 100TP
AC IN
230V 130W
T1.6A
MUTE COM 4Ω8Ω70V 100V
DC IN
12-24V MAX 5A
- +
OUTPUT INPUT
L
R
LINE 1 LINE 2 MIC 1 MIC 2 FM ANT
It allows to set and adjust from remote the main functions of the multimedia module.
Before use make sure that the battery is charged.
MODE
EQ
100+
VOL-
7 8 9
4 5 6
1 2 3
0
VOL+
+
PREV NEXT PLAY/PAUSE
MUTE SPEAKER OUTPUTS
-
+
12-24V
COM 4Ω 8Ω 70V 100V
FUSE
T2A
210-240V AC 50Hz 0,6A
P650C
60WRMS
L
R
L
R
AUX PHONO
INPUTS
MIC 2 MIC 1 FM ANT
PRIORITY
OFF ON
MODE
EQ
100+
VOL-
7 8 9
4 5 6
1 2 3
0
VOL+
+
PREV NEXT PLAY/PAUSE
blue USB
SD/MMC CARD
MODE Model: PAA 100T
POWER
10 11
912
8
713
6 14
155
416
3 17
2 18
119
0 20
-10 +10
TREBLE
-10 +10
BASS
MIN MAX
AUX
MIN MAX
PHONO
MIN MAX
MIC 2
MIN MAX
MIC 1
REPEAT
76
1
8
2
9
3
10
4
11 12
5
USB 26:26 USB AUX
SD
M
ECHO
MIN MAX
MIC 2
MIN MAX
BASS
-10dB +10dB
TREBLE
-10dB +10dB
MIC 1 /LINE 3
MIN MAX
TIME
MIN MAX
LINE 2
MIN MAX
LINE 1
MIN MAX
MIN VOL MAX
Model: HY1060MBT
25 2624211817161514 2019
22
13
23
AC IN
230V 130W
T1.6A
DC IN
24V MAX 5A
-
OUTPUT INPUT
L
R
LINE 1 LINE 2 MIC 1 / LINE 3 MIC 2 FM ANT
MUTE COM 4Ω8Ω70V 100V
1 2
1 MIC/LINE
ON-line
OFF-mic
2 PHANTOM
ON-open
OFF-close
T1.6A
ON ON PRIORITY
25 2624211817161514 2019
22
13
23
AC IN
230V 130W
T1.6A
DC IN
24V MAX 5A
-
OUTPUT INPUT
L
R
LINE 1 LINE 2 MIC 1 / LINE 3 MIC 2 FM ANT
MUTE COM 4Ω8Ω70V 100V
1 2
1 MIC/LINE
ON-line
OFF-mic
2 PHANTOM
ON-open
OFF-close
T1.6A
ON ON PRIORITY

76
Functions
1. ECHO
It adjusts the echo effect affecting the microphone
signal.
2. TIME
It adjusts the echo effect intensity.
3. BASS
To adjust bass tones.
4. TREBLE
To adjust treble tones.
5. LEDS
They indicate the level of the amplified signal.
6. MULTIMEDIA MODULE
It offers the possibility to play Mp3 files from USB/ SD
and AUX socket, manage bluetooth connections and
play FM radio.
7. MIC1/ LINE3
It adjusts the volume’s level of the signal connected
to the MIC1/ LINE3 (24) socket.
You can connect both microphones and line signals
and for the microphones it also supports phantom
power. The type of signal and the phantom function
can be selected through the switches (23). If you
don’t need phantom power, leave the function off to
avoid damaging the microphones.
8. MIC2
It adjusts the volume’s level of the signal connected
to the MIC2(25) socket.
9. LINE1
It adjusts the volume’s level of the signal connected
to the LINE1 (21) socket.
10. LINE2
It adjusts the volume’s level of the signal connected
to the LINE2 (22) socket.
11. VOL
It adjusts the master output volume.
12. ON/OFF BUTTON
13. POWER SOCKET
Plug here the supplied cable and connect it to a
common 110-230V household power outlet.
14. FUSE
Fuse holder. Extract it when it is necessary to check
and/or replace the fuse with one of the same rating.
15. MUTE
It turns off the volume of all the signals.
It is mainly used by external fixtures to play high
priority or alarm messages.
16. COM
Negative pole (-) terminal for speaker connection.
17. 4Ω/ 8Ω
Positive pole terminals (+), used along with the
connector COM (16) to connect speakers for 4Ω/ 8Ω
impedance operation.
18. 70V/100V
Positive pole terminals (+), used along with the
connector COM (16), to connect speakers for 70V/
100V operation.
19. DC POWER
Thanks to these terminals it is possible to connect or
24V external batteries, to use the amplifier also on
vehicles.
20. OUTPUT SOCKETS (RCA)
They supply a line signal for amplifiers, recorders or
other external fixtures.
21. LINE IN 1
RCA sockets to connect line sources (PC, CD,
DVD...)
22. LINE IN 2
RCA sockets to connect line sources (PC, CD,
DVD...)
23. LINE/PHANTOM SELECTORS
Use these selectors to set the kind of input (mic or
line). If you connect mic sources it is possible to
activate the phantom power supply (10V).
24. MIC1/ LINE3 SOCKET
You can connect here mic or line sources using the
6,3 mm jack socket for unbalanced signals or the XLR
socket for balanced signals.
25. MIC 2 SOCKET
6,3mm jack to connect dynamic microphones. This
socket is endowed with priority function to reduce the
other sources’ signal. This function cannot be
disabled.
26. FM ANT SOCKET
Socket to connect the FM antenna

8
8
A) Display
B) USB Socket
C) 3,5mm jack ST socket (for external line sources)
D) Back: to go back to the beginning of the track. If pressed more than once it skips to previous
tracks.
E) Play/pause: To stop temporarily or
restart the reproduction of a song.
F) Forward: to go to next tracks
G) Mode: it allows to select among USB/
SD/ Bluetooth/ FM
H) Repeat: press to repeat the track
I) SD card slot
MODE
EQ
100+
VOL-
7 8 9
4 5 6
1 2 3
0
VOL+
+
PREV NEXT PLAY/PAUSE
MUTE SPEAKER OUTPUTS
Model: PAA 100T
POWER
10 11
912
8
713
6 14
155
4 16
3 17
2 18
119
0 20
-10 +10
TREBLE
-10 +10
BASS
MIN MAX
AUX
MIN MAX
PHONO
MIN MAX
MIC 2
MIN MAX
MIC 1
-
+
12-24V
COM 4Ω 8Ω 70V 100V
FUSE
T2A
210-240V AC 50Hz 0,6A
P650C
60WRMS
L
R
L
R
AUX PHONO
INPUTS
MIC 2 MIC 1 FM ANT
PRIORITY
OFF ON
BLUETOOTH
This amplifier includes the bluetooth function to receive audio from smartphones and tablets
without using connection cables. To activate the function press the “mode” button (1) on the
multimedia module : the word “BLUE” will appear on the display. Enter the bluetooth setup menu of
your phone and scan for the amplifier to pair it. From this moment on, all the audio from your
phone will be sent to the amplifier.
FM RADIO
Using the mode button select the Radio function. Through the other keys you can
search for the desired radio station. Make sure you have connected the antenna to the FM
socket (22).
The manufacturer, in order to improve its products, reserves the right to modify their characteristics whether technical or aesthetic, at
any time and without notice.
USB 26:26 USB AUX
SD
M
D E F G IH
B C
A

11
9
This symbol alerts you of the presence of important operating and maintenance instructions, in the manual or in
the documentation accompanying the product.
This symbol alerts you to the presence of uninsulated dangerous voltage within the product’s enclosure that might be
of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
The CE mark indicates that this product complies with the applicable European directives and their related standards.
Compliance documentation in complete form is available at the company Karma Italiana Srl
Directive 2012/19/UE regarding electric and electronic equipment waste (WEEE). The symbol of the crossed-out dustbin
indicates that the product at the end of its life must be collected separately from other waste . The user must ,
therefore , confer the fixture complete with all the essential components to an authorized disposal center for collection of
electronic and electrical waste, or return it to the dealer when buying new equipment of equivalent type, at a rate of one to
one, or one to zero if external dimension is less than 25cm. Appropriate separate collection to send the decommissioned
equipment to recycling , treatment and environmentally compatible disposal helps to prevent negative impact on the
environment and human health and promotes recycling of the materials making up the product. In Italy illegal dumping of
the product by the user entails the application of administrative sanctions pursuant to Legislative Decree n. 49
(14/03/2014).
The product’s remote control contains a battery which, according to the European Directive 2013/56/EU, cannot be
disposed of with normal household waste. Please inquire about the local regulations regarding the separate collection of
batteries: a correct disposal allows to avoid negative consequences for the environment and health.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER, CONTAINS NO USEFUL PARTS FOR THE USER.
REFER TO QUALIFIED STAFF FOR ASSISTANCE.

10
10
Made in China
www.pearller.com
TECHNICAL SPECIFICATIONS
Power 100W Max - 60W RMS
Power supply 230V ~ - 50Hz ; 24V
Tone controls Bass & Treble
Output Impedance 4 - 8 Ohm
Constant voltage 70V - 100V
Line inputs 3
Mic inputs 2
Phantom power +10V
MP3 player USB / SD / BT
Bluetooth Yes - Freq. 2.4Ghz
Other functions FM radio / Echo / Mute
Fuse 1,6A
Frequency response 80 Hz- 20 KHz
Remote control battery CR 2032 3V Lithium (included)
Dimensions 363 x 93 x 290 mm
Weight 6,5 Kg