peerless-AV SPK-060 User manual

12016-01-12 #:180-9069-D
XTREMETM OUTDOOR SOUNDBAR
MODEL: SPK-060
User Manual
www.peerless-av.com

22016-01-12 #:180-9069-D
ENG - This product was designed to be installed on wood stud walls and solid concrete (2000 psi density mini-
mum) or cinder block walls. Before installing make sure the supporting surface will support the combined load of
the equipment and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur
and product may fail. Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting
equipment to safely lift and position equipment. This product is intended for indoor use only. Use of this product
outdoors could lead to product failure or personal injury. For support please call customer care at 1-800-865-2112.
WARNING
Symbols
ENG
WARNING
ENG
#
Skip to step.
ENG
x3
Screws must get at
least three full turns
and fit snug.
ENG Do not overtighten screws.
ENG
Tools Needed for Assembly.
ENG 1
2
ENG To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
4
+1/2
3
1/2"
(13mm) 5/32"
(4mm)

32016-01-12 #:180-9069-D
Warnings and symbols ..........................................................................................................................2
General Safety Precautions ...................................................................................................................4
Parts list ...............................................................................................................................................6
Installation Instructions...........................................................................................................................8
Mounting to a Wall..........................................................................................................................8
Mounting to a Display...................................................................................................................14
Battery Installation and Replacement...................................................................................................16
Cable Managment and Soundbar Orientation..............................................................................17
Operating Instructions ..........................................................................................................................18
Using The Remote Control...........................................................................................................18
Tips .......... ...........................................................................................................................................19
Troubleshooting ...........................................................................................................................19
Product Specifications .........................................................................................................................19
Warranty .............................................................................................................................................20
CONTENTS

42016-01-12 #:180-9069-D
Read before operating equipment
Thank you for purchasing our product. Before using it, please read this user manual carefully
and follow the instructions correctly for safe operation. Please keep this manual handy for future
reference. Also, please be sure to always include this user manual in the packaging when transferring
or transporting this product to a different location.
Batteries Installed Warning
CAUTION - Danger of explosion if batteries are incorrectly re-placed. Replace only with the same or
equivalent type. The batteries shall not be exposed to excessive heat such as sunshine, fire or the
like.
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
6. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
7. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, does not operate
normally, or has been dropped.
8. Only use attachments/accessories specified by the manufacturer.
9. In case of emergency such as fire or electric shock caused by the product, immediately contact
911 or proper emergency police/fire service agencies in your country.
10. Follow instructions for wall, shelf or ceiling mounting as recommended by the manufacturer.
11. Use properly rated power voltage. Use of non-rated voltage may cause fire, electric shock and
severe damages to the product.
12. Do not open the cabinet under any circumstances. High voltage inside of this product may cause
electric shock.
13. Do NOT, under any circumstances, modify or disassemble this product as it may cause fire,
electric shock, or severe damages to the product. Also any unauthorized modifications made to
the product automatically void product warranty.
14. Never touch antenna lines, wires, if applicable, power cables or power plugs in such
circumstances as lightning and thunder as it may cause electric shock.
15. Any severe physical impact on the product may cause certain components to
fall out of place within and break, which may cause fire or electric shock. In
such event, do not operate the product. Contact the manufacturer for support.
.
GENERAL SAFETY PRECAUTIONS
RISK OF ELECTRICAL SHOCK
To reduce the risk of electric shock, do not disassemble the unit under any circumstances. No
user serviceable parts inside. All product services should be done by the Peerless-AV certified
service personnel.
WARNING

52016-01-12 #:180-9069-D
16. Periodically clean dust off the power plug, to keep it clean and dry, ensuring proper and safe
operation of the product.
17. Do NOT destroy, process, or place the product close to any heating device; do NOT bend or twist
power cords, power plugs, cables, or wires with excessive force; do NOT place any heavy object
on the product as all of the above may cause damages to the product and result in fire or electric
shock.
18. Do NOT touch power plugs with wet hands.
19. Always make sure to plug in the power plug firmly and completely. Incompletely placed power
plugs may cause fire or electric shock due to built up heat emission.
20. Do NOT use any non-rated power sockets or power strips with many other devices jointly plugged
in. The wire of non-designated capacity may cause fire due to built up heat emission. Try to use a
single, directly dedicated and rated GFI power socket for the product for safe operation.
21. In case of product malfunction or unusual events such as electrical burning smell, smoke, or loss
of content signals on soundbar due to internal overheating, immediately turn off and unplug the
power and contact the manufacturer.
22. Do NOT install the product at such unstable locations as moving objects, constantly vibrating
props, or uneven surfaces. Improper installation may cause products to fall off. Follow mounting
instructions properly for safe operation of the product.
23. Do NOT install the product near any poisonous gas or chemically unstable atmosphere as it may
cause fire.
24. Do NOT install the product near any strong magnetic or electrical current field. It may cause
fire, electric shock, or severe damages to the product. The product may be subject to any
electromagnetic radiation, causing failure.
25. Do NOT leave any fire source, such as candles, close to or on the product as it may be a cause
for fire or damages to the product.
26. Do NOT move or transport the product with any cables (power cables, content connectivity
cables) plugged in to the source devices. Damages may occur to the cables, plugs, or jointing
connectors of the cables due to forcible bending and stress, which may cause damages to the
waterproof seal of the product, making it subject to fire, electric shock, or shorted circuit.
27. When unplugging, always grab the plugs of power cords or cables. Improper pulling of the cords
or cables may cause damages to the waterproof seal of the product, making it subject to fire,
electric shock, or shorted circuit.
28. Do NOT climb on the product.
29. Do NOT use any other power cords or connection cables than what is provided with the product
or from the manufacturer directly. Use of untested, unauthorized, or substituted power cords or
connection cables may be a cause for malfunction, fire, electric shock, or severe damages to the
product. Also such use of improper or undesignated power cords or connection cables will void
product warranty.
30. Always leave the Power Off when plugging or unplugging the power cords or connection cables to
avoid electric shock or damages to the product.
31. Do NOT use any chemical such as paint thinner or benzene to clean the product’s exterior. It may
cause scratches on the surface, erasing proper indications, identification labels, or instructions on
the exterior, which may be a cause for misuse and improper operation of the product.
32. Never power wash or spray water at the front grill of the soundbar. While the speaker gaskets
are IP65 rated and won't allow ingress of water to the electrical components, doing so may cause
damage to the drivers and void the warranty.

62016-01-12 #:180-9069-D
Plug Type: North America
Plug Shape:
Region: USA/Canada
Voltage: AC 120V
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rule. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with these instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encourage to try to correct the interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/display technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Notice
CAUTION: Please use the electrical cord provided with this display. If a electrical cord is not supplied
with this equipment, please contact your supplier. Only plug equipment into receptacles with GFCI
protection.
IMPORTANT: Peerless-AV is not responsible for any issues created by water present at the
plug/receptacle insertion point.
Relevant Information
Record your soundbar's model and serial number here for future reference. Keep this user manual in
an accessible location in the event settings need to be changed or service is desired.
Note: Your soundbar serial number can be found on the box and on the sticker on the input panel of
the device
Model Number ____________________________________
Serial Number ____________________________________

72016-01-12 #:180-9069-D
A (1)
soundbar
C (1)
wall plate
D (1)
left mount bracket E (1)
right mount bracket
F (1)
remote control
B (2)
hook-on bracket
Parts List Part #Description Qty
Asoundbar 1 soundbar
Bhook-on bracket 2 180-0265
Cwall plate 1 180-0264
Dleft mount bracket 1 180-0268
Eright mount bracket 1 180-0267
Fremote control 1 remote
G#14 x 2.5" wood screw 2 520-D1033
H8mm concrete anchor 2 590-0320
Ilock washer 2 540-3622
Jnylon washer 2 590-1231
KM8 X 25mm socket pin screw 2 520-D1101
LM8 x 40mm socket pin screw 2 520-D1152
M.5" spacer 2 540-1059
N.25" spacer 2 540-1002
OM5 x 10mm self-tapping 2 520-D1164
Pend cap 2 590-0407
Q4mm security allen wrench 1 520-1129
P (2)
end cap

82016-01-12 #:180-9069-D
M (2)
.5" spacer
N (2)
.25" spacer
O (2)
M5 x 10mm
J (2)
nylon washer K (2)
M8 x 25mm
#14 x 2-1/2" wood screw
G (2)
I (2)
lock washer
L (2)
M8 x 40mm
Q (1)
4mm allen wrench
8mm concrete anchor
H (2)

92016-01-12 #:180-9069-D
INSTALLATION INSTRUCTIONS
Mounting to a Wall
1
1b-1
Wood stud wall. Concrete/Cinder block.
1a-1
1a-1
Use stud finder to locate and
mark stud center lines.
1a-2
Level wallplate. Mark mounting holes on stud
center lines. C

10 2016-01-12 #:180-9069-D
G (4)
C
1a-3
1a-4
Level wallplate. Install using wood
screws provided.
5/32"
(4mm)
3/8"
(10mm)
Drill mounting holes into supporting surface
(2.5" (64mm) minimum depth required).
2
Maximum 80 in. • lb (9 N.M.).
Mounting hole must center on stud.
2.5"
(64mm)
5/32"
(4mm)

11 2016-01-12 #:180-9069-D
2.5"
(64mm)
5/16"
(8mm)
1b-1
1b-2
Level wallplate. Mark mounting holes.
5/16"
(8mm)
Do not drill into mortar joints.
Drill mounting holes into supporting surface
(2.5" (64mm) minimum depth required).
C

12 2016-01-12 #:180-9069-D
H (2)
1b-4
Level wallplate. Install using concrete
anchors and wood screws provided. 3/8"
(10mm)
1b-3
Maximum 80 in. • lb (9 N.M.).
C
G (4)
Insert anchor flush to concrete.
H

13 2016-01-12 #:180-9069-D
3
2
Q
B
O
x2
P (2)
A
Do not fully tighten

14 2016-01-12 #:180-9069-D
4Q
Hook brackets onto wall plate and tighten M5 screw
Atighten
B (2)
SIDE VIEW
3
B (2)
I (2)
AK (2)
O

15 2016-01-12 #:180-9069-D
Mounting to a Display
15.7" - 23.6"
(400mm - 600mm)
7.9" - 15.7"
(200mm - 400mm)
Position display screen-side down on a flat, clean surface.
Position soundbar grill-side down either above or below
display. Determine which bracket configuration below fits
your display
2
EE
D
D
1
P (2)
A

16 2016-01-12 #:180-9069-D
Determine which hardware to use based on the depth
needed.
*Hardware included for installing soundbar only. To
attach display, use hardware included with display
mount.
3
KKL
L
N
J
M
M
x3
N

17 2016-01-12 #:180-9069-D
Cable Mangement and Soundbar Orientation
1. Connect the soundbar’s male 3.5mm audio cable
to the audio out port on the TV. Make sure the male
3.5mm audio cable is fully inserted.
2. Plug the soundbar’s power cable into the nearest
outlet.
3. Note: If the audio output of the TV is RCAstereo, a
female 3.5mm to male RCA stereo audio cable will
be required.
3.5mm female to male RCA stereo
audio cable (sold seperately)
Battery Installation and Replacement
The remote control is powered by two 15V AAA batteries
currently installed.
To install or replace batteries:
1. Replace the batteries by removing the battery cover
and sliding in two new "AAA" batteries.
Important: Match the batteries to the (+)
and (-) marks on the inside of the remote control.
2. Snap the battery cover back onto the remote control.
Incorrect usage of batteries can result in leaks or
bursting. Peerless-AV recommends the following
battery use:
1. Do not mix battery brands.
2. Do not combine new and old batteries. This can
shorten the battery life or cause liquid leakage of
the batteries.
3. Remove dead batteries immediately to prevent
battery acid from leaking into the battery
compartment.
4. Do not touch exposed battery acid as it may
injure skin.
5. Remove the batteries if you do not intend to use
the remote control for a long period of time.
CAUTION

18 2016-01-12 #:180-9069-D
Remote control functions
Discrete Off – Powers the soundbar Off
Discrete On – Powers the soundbar On
Mute- Toggles the mute on and off
Bass - – Decreases the bass level
Bass + - Increases the bass level
Volume + - Increases the volume level
Volume - - Decreases the volume level
Treble - - Decreases the treble level
Treble + - Increases the treble level
Power – Toggles power on and off
Bluetooth – switches to bluetooth input
AUX – switches to 3.5mm input
1. Turn on the TV.
2. Turn on the soundbar by aiming the included remote
at the front of the soundbar and pressing the ON
button. Your soundbar will begin to play the audio
coming from your display. If you don’t hear any
audio coming from the soundbar aim the remote at
the soundbar and press the AUX button.
3. To listen to a Bluetooth® enabled device, aim the
included remote at the front of the soundbar and
press the button with the Bluetooth icon on it.
4. When the soundbar is switched to the Bluetooth
input a blue light will appear on the soundbar. Make
sure that Bluetooth function is enabled on the
device that is being connected and that the device
is within Bluetooth range (33’). Scan for devices on
your Bluetooth enabled device and select “Peerless-
AV” from the list of devices. Start playing content
from your Bluetooth enabled device.
OPERATING INSTRUCTIONS
Using The Remote Control
Discrete ON
ON
Power Toggle
Discrete OFF OFF
Treble -
Bluetooth
Mute Toggle
Volume +
Volume- Vol-
Vol+ Bass+
Bass+Bass-
Treble +
Treble +Treble -
AUX Input
peerless-AV
AUX
Bass-

19 2016-01-12 #:180-9069-D
Specifications subject to change without notice
PRODUCT SPECIFICATIONS
Sound Bar
TV Size Range 42" (107cm) and above
Built-in Class D Amplifier Total System Power: 180 watts
SPL 103db
Crossover Digital Signal Processing (DSP)
Drivers (2) 3" [76mm] Aluminum Drivers
Tweeters (2) 1.5" [38mm] Titanium Domes
Audio Inputs (1) Analog 3.5mm connector, (1) Bluetooth 4.0 input
Environmental Protection
Rating IP65
Frequency Response 50Hz - 20kHz
Operationg Temperature
Range -40° - 160°F (-40°C - 71°C)
Vesa Mounting Pattern 400mm wide pattern
Product Dimensions 38.09" x 3.91" x 4.07" (967 x 99 x 103mm)
Product Weight 8.7lb (3.95kg)
Troubleshooting
TIPS
Distorted Audio • Source level should not exceed 80%.
• Verify the the 3.5mm audio plug is fully inserted.
No Audio • Verify that the soundbar is plugged into an outlet that has power. Ensure
that the audio signal cable is connected to the audio-out port on the TV.
Make sure that the source volume is not muted and that the volume level is
not at zero. Aim the remote at the soundbar and select the desired input of
the source that is playing.
Probelm
Connecting
a Bluetooth
Enabled Device
• Aim the remote at the front of the soundbar and hit the Blutetooth icon.
• Make sure Bluetooth is enabled on the device that is being connected and
that you are within 33' of the soundbar.
• Complete a device scan on the device that is being connected and select
"Peerless-AV" from the list of devices.
• If "Peerless-AV" is not present on the list, turn the Bluetooth on the device
off. Turn the Bluetooth on the soundbar off by switching to theAux input.
Turn the Bluetooth on the soundbar back on by pressing the Bluetooth
button on the soundbar remote. Turn the Bluetooth on your device back on
and perform another scan.

Peerless-AV Europe
Unit 3 Watford Interchange,
Colonial Way, Watford, Herts,
WD24 4WP, United Kingdom
Customer Care
44 (0) 1923 200 100
www.peerless-av.com
© 2016, Peerless Industries, Inc.
Peerless-AV de Mexico
Ave de las Industrias 413
Parque Industrial Escobedo
Escobedo N.L Mexico 66050
Servicio al Cliente
01-800-849-65-77
www.peerless-av.com
© 2016, Peerless Industries, Inc.
Peerless-AV
2300 White Oak Circle
Aurora, IL 60502
Ph: [phone]
Fax: [phone]
www.peerless-av.com
© 2016, Peerless Industries, Inc.
The Peerless-AV Xtreme Outdoor Soundbar is warrantied to be free of defects in material and workmanship from the time of
purchase by the original owner. If this product is found and proved to be defective under the terms and conditions of this warranty,
Peerless-AV will repair or replace defective parts with new and/or reconditioned parts at no charge for the parts and labor to the
original owner, subject to the terms and conditions of this Limited Warranty.
This Limited Warranty covers failures due to defects in material or workmanship that occur during normal residential or commercial
use as follows:
1. Parts – the warranty period for parts are: one (1) year from the date of original purchase. During the applicable Limited
Warranty period for parts, defective parts will be replaced at no charge. Parts used for the replacement will be warrantied for the
remainder of the original warranty period for those parts.
2. Labor – the warranty period for labor is: one (1) year from the date of original purchase. During the applicable Limited Warranty
period for labor, Peerless-AV will provide the labor for warranty repair at no charge for a period of one (1) year from the date of
original purchase.
3. Original owner must provide verification of the date of purchase when requesting Limited Warranty Services. Acopy of the
original Dated Sales Receipt is required together with the product to obtain service under this Limited Warranty. Product
Registration at the time of purchase is required.
4. All repairs must be performed by a Peerless-AV Authorized Service Provider.
5. Customer is responsible for returning (including any freight and shipping costs) defective unit to a Peerless-AV Authorized
Service Provider. If the product is found to have no defects, the customer will be responsible for return shipping costs as well.
THIS LIMITED WARRANTY DOES NOT COVER:
• Shipping damage.
• Damage caused during customer unpacking, and/or removal of packing materials.
• Damage due to improper, incorrect or insufficient AC voltage.
• Damage due to power surges or lightning strikes.
• Damage which results from fire, flood, lightning, tornado, hurricane, large hail, extremely gusty winds, sand storms, vandalism,
terrorism or other acts of nature.
• Any unit which has been modified or damaged due to improper installation or failure to obey the operating instructions provided
in the User Manual.
• Any failure, loss, damage or personal injury due to accident, neglect, misuse, abuse, improper operation, improper maintenance,
improper storage, alteration to the unit, or failure by the consumer to follow operating instructions provided in the User Manual.
• Any owner other than the original owner.
• Any unit purchased from an unauthorized seller.
• Any transportation charges incurred in connection with warranty services.
• Indirect, consequential, or special damages, except as required by federal or state laws.
• Any unit tampered with, modified, adjusted or repaired by any party other than the Peerless-AV Authorized Service Provider.
• Any cosmetic damages to the surface or exterior that has been deface or faded, or caused by normal wear and tear or exposure
to chemicals, acid rain, large hail or adverse weather conditions.
• Because the soundbar cabinet and components are hand-assembled and altered, we do not cover minor cabinet blemishes or
minor scratches to the exterior of the unit.
• Any damage, scratches or blemishes to the soundbar and/or exterior cabinet due to end-user cleaning.
• If the original product serial number has been removed, defaced or tamered with in any way.
• Return shipping when no defect is found.
Peerless-AV and its representatives or agents shall in no event be liable for any general, indirect or consequential damages arising
out of/or caused by the use of/or the inability to use this product.
This warranty is made in lieu of all other warranties, expressed or implied, and all other liabilities on the part of Peerless-AV. Any
other warranties, including the warranties of merchantability and fitness for a particular purpose are hereby disclaimed by Peerless-
AV and its representatives and/or agents.
The laws of some states do not allow exclusion of implied warranties; therefore, this warranty shall be deemed modified to be
consistent with such laws. This Limited Warranty gives you specific legal rights. You may also have other rights that vary from state
to state.
All warranty inspections and repairs must be performed by Peerless-AV or its authorized service representations.
Customer Care: 800.865.2112 or 630.375.5100
ONE YEAR PARTS & LABOR LIMITED WARRANTY