peerless-AV SPK510 Guide

Installation and Assembly:
Universal Speaker Stands for speakers up to 4.5kg (10lbs)
Model: SPK510
Visit Peerless-AV at www.peerless-av.com
SPK510 ISSUED 11-09-27 REV1For Technical Support call [phone]
1
Parts List
Description Qty
AMetal base 2
BPole with twist-lock 2
CUniversal bracket with retaining screw 2
DUniversal bracket cover 2
EM5 x 12mm screw 4
FM5 x 18mm screw 4
GM4 x 20mm screw 2
HM5 washer 4
JM4 washer 4
KThumb nut 2
LHolder 2
MRetaining nut 2
A
B
J
H
D
EFGK
LM
C
Insert speaker pole (B) into base (A) and
screw-on holder (L), tightening with retaining nut
(M) so that the assembly is secure.
To adjust height of speaker pole, turn the
twist-lock anti-clockwise and slide the top half of
the pole the desired length. Turn the twist-lock
clockwise to lock pole in position. The pole
adjustment range is 680mm to 1100mm.
2
B
L
A
M
LOCK
B
Fig. 1 Fig. 2

For Technical Support call [phone]
Page 2 of 2
SPK510 ISSUED 11-09-27 REV1
Peerless-AV
2300 White Oak Circle, Aurora, IL 60502, USA
Tel: [phone] Fax: [phone]
Email: [e-mail]
Web: www.peerless-av.com
Peerless-AV Europe
Unit 3 Watford Interchange, Colonial Way, Watford,
Herts. WD24 4WP, UK
Tel: [phone] Fax: [phone]
Email: [e-mail]
Web: www.peerless-av.eu.com
BBG Distribution Ltd t/a Peerless-AV Europe
Peerless-AV UK
Unit 3 Watford Interchange, Colonial Way, Watford,
Herts. WD24 4WP, UK
Tel: [phone] Fax: [phone]
Email: [e-mail]
Web: www.peerless-av.co.uk
BBG Distribution Ltd t/a Peerless-AV Europe
Peerless-AV de México
Ave de las Industrias 413, Parque Industrial
Escobedo, Escobedo N.L., C.P. 66050 México
Tel: [phone]
3Secure universal bracket
(C) to top of speaker pole
(B), tightening the bracket’s
retaining screw as required.
Speaker cable should be
threaded through pole or
bracket as shown in g 3a
or 3b.
Fig. 3a Fig. 3b
B
C
Retaining
screw
Speaker
cable
Speaker
cable
4a
FOR SPEAKERS WITH KEYHOLE TYPE FIXINGS
Assemble thumb nut (K), M4 washers (J) and
M4x20mm screw (G) as shown in Fig. 4a.
Attach the speaker and tighten thumb nut (K) if
required. Install bracket cover (D).
Fig. 4a
DJ
K
J
G
B
C
FOR SPEAKERS WITH THREADED HOLE FIXINGS
The speaker should be connected to the
universal bracket (C) using a M5 washer (H) and
either the M5x12mm (E) or M5x18mm (F) screw
depending on the speaker type. Install bracket
cover (D).
4b
B
E or F
D
C
H
Fig. 4b
C
Retaining
screw
B