Penpower Technology Wireless Pen User manual
Wireless Pen
User Manual
Version: 8.5.0
Release: May, 2014
Edition: 1
Penpower Technology Ltd.
Software User License Agreement
You are licensed to legally use this software program (“the Software”) by
Penpower Technology Ltd (“Penpower”) under this license agreement (“The
Agreement”). If you do not agree with any of the provisions in this Agreement,
please do not install, copy or use the Software. By using the Software, you are
deemed to fully understand and accept the provisions of this Agreement.
1. Intellectual Property
All intellectual property rights in the Software, together with all informa-
tion and documents included in the packaging for the Software (including
but not limited to copyrights), are property of Penpower, and are protected
by relevant laws and regulations.
2. License to Use
You are authorized to use the Software on one (1) single computer only.
You may not use the Software on any other machines other than the said
single computer.
3. Authority to Copy
The Software and all documents included with the Software, and copyright
thereof, are property of Penpower. You are licensed to make one (1) copy
of the Software for your personal backup purposes. All other acts of copy-
ing are strictly prohibited.
You may not sell, lease, dissemble, reverse engineer, copy, translate, adapt
or derive the Software, or obtain the source code of the Software by any
other means. You may not use the Software for any purposes other than
those permitted under this Agreement.
4. Business Users
If you need to install or use the Software on more than one (1) computer,
please contact Penpower or our local distributor to purchase a license for
the additional use.
5. Liability
You agree to indemnify Penpower against all losses, costs, debts, settlement
payments or other expenses (including but not limited to attorneys fees)
arising from your breach of this Agreement, and you agree to compensate
Penpower for all of the abovementioned damages.
6. No Warranty
Effectiveness of a packaged software in handling information is closely
related to its software and hardware environment. The Software is pub-
lished following careful development and product testing by Penpower, but
Penpower is not able to conduct tests based on all possible combinations
of software and hardware environment. Therefore, Penpower is unable to
promise nor warrant that there will be absolutely no risk of loss or damage
of information, or any other kind of loss, during installation and/or execu-
tion of the Software. You must be fully aware of your risks in using the
Software.
Penpower will provide you with the Software and support services in re-
spect of the Software to the maximum extent permitted by law. However,
Penpower does not warrant that the Software and information included in
the package of the Software contain no defects or errors. Penpower is not
liable for any indirect, special or incidental loss arising from the Software,
including but not limited to loss of prots, damage to business reputation,
cessation of work, hardware malfunction or damage, or any other commer-
cial damage or loss arising from commercial use of the Software.
7. Limitation of Liability and Damages
The maximum amount of compensation payable by Penpower, in respect
of any damage incurred by you for any reason under this Agreement, is
limited to the amount you have already paid to Penpower in respect of the
Software.
Under no circumstances will Penpower be held liable for the possibility of
loss, notwithstanding Penpower may be aware of the possibility of such
loss.
8. Prohibition Against Sublicense
You are prohibited to assign the license in respect of the Software granted
to you under this Agreement, or to grant a sublicense to another person.
9. Jurisdiction
With regards to any disputes arising from this Agreement, Penpower and
you agree that the court having jurisdiction over the business location of
Penpower will be the court in the rst instance.
10. Miscellaneous
In the event that any provision of this Agreement is found to be invalid at
law, such invalidity will not affect the validity of any other provisions, or
the legal enforceability of such other provisions.
In the event that the Software cannot be executed under conditions of nor-
mal use, due to any damage to the original disk/s, Penpower will replace
the disk/s free of charge.
Automatic updates are set by default within this software. If new updates
are available, the automatic updates will download them and our server
will record your computer’s IP and MAC address along with the automatic
updates.
Any information collected by us from your computer will be used exclu-
sively for the stated purpose, and will not be used for any other purpose.
This function of automatic updates can be disabled by clicking on the Set-
tings button and in the options panel ticking the box “Cancel Automatic
update”.
FCC Note
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
(1) These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
(2) This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the follow-
ing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.*
Without the permission from the manufacturer, please do not modify
this equipment arbitrarily.
Contents
Chapter 1 Product Overview ............................................................... 1 -1
1.1 Product Features ......................................................................... 1 - 1
1.2 Hardware Introduction ............................................................... 1 - 2
1.2.1 Hardware Specification .................................................... 1 -2
1.2.2 Hardware Function Introduction ...................................... 1 - 2
Chapter 2 Installation and Settings ...................................................... 2 - 1
2.1 System Requirements ................................................................. 2 - 1
2.2 Handwriting Software Installation ............................................. 2 - 1
2.3 Hardware Connection ................................................................. 2 - 5
2.4 Run Wireless Pen Handwriting System ...................................... 2 - 5
2.5 Registration ................................................................................ 2 - 5
2.6 Calibration .................................................................................. 2 - 6
2.7 ID Code Matching ...................................................................... 2 - 7
Chapter 3 Wireless Pen.......................................................................... 3 - 1
3.1 Interface Introduction ................................................................. 3 - 1
3.2 Handwriting Modes .................................................................... 3 - 2
3.2.1 Full Screen handwriting Mode ........................................ 3 - 2
3.2.2 Writing Pad Mode ............................................................ 3 - 3
3.3 Input Tool ................................................................................... 3 - 4
3.4 Settings ....................................................................................... 3 - 5
3.5 Learning String ........................................................................... 3 - 5
3.6 Custom Phrase ............................................................................ 3 - 5
3.7 AI ................................................................................................ 3 - 5
3.8 On-Line Translator ..................................................................... 3 - 6
3.9 Recitation .................................................................................... 3 - 6
3.10 Signature ................................................................................... 3 - 6
3.11 Data Management ..................................................................... 3 - 6
3.12 Gesture ...................................................................................... 3 - 7
Chapter 4 Full Screen Handwriting Mode .......................................... 4 - 1
4.1 Getting Started to Write .............................................................. 4 - 1
4.2 Candidate Words ........................................................................ 4 - 3
4.3 Related Phrase ............................................................................ 4 - 4
4.4 Symbols ...................................................................................... 4 - 5
4.5 How to Write in Free Writing Mode .......................................... 4 - 6
4.6 Bubble Interface ......................................................................... 4 - 7
4.6.1 Open and Close Bubble Interface .................................. 4 - 8
4.6.2 Candidate Words ............................................................ 4 - 9
4.6.3 Phrase Correction .......................................................... 4-10
4.6.4 Artificial Intelligence ..................................................... 4-11
4.6.5 Original Script................................................................ 4-12
4.6.6 Symbols ......................................................................... 4-12
4.6.7 Homophone .................................................................... 4-13
4.6.8 Related word .................................................................. 4-14
4.6.9 Translation ..................................................................... 4-15
Chapter 5 Writing Pad .......................................................................... 5 - 1
Chapter 6 Input Tool ............................................................................ 6 - 1
6.1 Zhu yin Keyboard ....................................................................... 6 - 1
6.2 English Keyboard ....................................................................... 6 - 3
6.3 Hanyu Pinyin Keyboard ............................................................. 6 - 4
6.4 Symbol Keyboard ....................................................................... 6 - 5
Chapter 7 Settings ................................................................................. 7 - 1
7.1 General Setting ........................................................................... 7 - 2
7.2 Chinese Output Setting ............................................................... 7 - 5
7.3 Recognition ................................................................................ 7 - 7
7.4 Writing Setting ........................................................................... 7 - 9
7.5 Tablet Setting ............................................................................ 7-12
7.6 Update Setting .......................................................................... 7-14
Chapter 8 Learning String ................................................................... 8 - 1
Chapter 9 Custom Phrase .................................................................... 9 - 1
9.1 Add Phrase .................................................................................. 9 - 1
9.2 Delete Phrase .............................................................................. 9 - 3
Chapter 10 Artificial Intelligence ...................................................... 10-1
Chapter 11 On-Line Translator ......................................................... 11-1
Chapter 12 Recitation ......................................................................... 12-1
12.1 Penpower Voice Reader .......................................................... 12-1
12.2 Reading Setting ...................................................................... 12-2
Chapter 13 Signature .......................................................................... 13-1
Chapter 14 Data Management ........................................................... 14-1
Chapter 15 Presenter Mode ............................................................... 15-1
There may be newer versions of the software that was released during or
after this product’s manufacturing date. If the content in the User Manual
differs from the on-screen interface, please follow the instructions on the
on-screen interface instead of the User Manual.
Chapter 1 Product Overview
1-1
Chapter 1 Product Overview
1.1 Product Features
<<Presentation Function>>
• Built-in slideshow controls: Next/Previous slide buttons and black
screen functions make your presentation more professional.
• Timer: The device helps you manage your time during presentations
with its built-in LCD timer. The automatic times-up ashing light let
you present without worrying about time constraints.
• Laser pointer: You can highlight key points in your presentation with
the built-in laser pointer.
<<Handwriting Function>>
• Cursive writing and articial intelligence recognition kernel: No
particular stroke order is required. Capable of recognizing extremely
cursive handwriting accurately. Highly adaptable to the uniqueness of
your handwriting and can be used as a personal handwriting system.
• Slick and intuitive user interface: The toolbar and interface design
provides an intuitive and personalized user experience, enable quick
access to frequently used functions. Two writing interfaces for you to
choose from: full-screen continual writing interface and writing pad
interface. Moreover, we also provide static mode in the writing pad in-
terface as another option.
• Post-related word/phrase prediction: Integrate the functions of text
prediction and user handwriting pattern learning. The new function can
provide you more predicted words, become the smartest predictive text
function corpus on the market. The predictive text function will appear
instantly right after your handwriting. Moreover, your commonly used
words and phrases will be learned and shown rst to increase writing
efciency.
• Work smart and play smart via handwriting: You can hand write
text in Microsoft Ofce, email, MSN, Skype, QQ, Facebook, Twitter
and others.
1-2
Wireless Pen
1.2 Hardware Introduction
1.2.1 Hardware Specication
1. Dimensions: 118mm x62mm x 16mm
2. Weight: 58g
3. Writing Area: 56mm x43mm
4. Radio Frequency: 2.4G
5. Transmission Distance: 10m
1.2.2 Hardware Function Introduction
123
4
6
5
10
7
11
12
8
913
14
Front Side Back SideLeft Side Right Side
Note:There is a protection bag for Wireless Pen in the package. It
provides protection for Wireless Pen from leaks and scratches.
Always put your Wireless Pen in the protection bag when you are
not using it.
Chapter 1 Product Overview
1-3
1. Wireless receiver: Pull out the wireless receiver from the Wireless Pen
hardware. Connect the wireless receiver to the USB port of your com-
puter, and the Wireless Pen will connect with your computer wirelessly.
2. Left button:
Handwriting Mode: When press the left button, the system will replace
the recognized character with the next candidate character. Press again,
replace to the next candidate character and so on.
Presenter Mode: In the Presenter mode, the left button acts as the page
up function to show the previous page.
3. Right button:
Handwriting Mode: It provides 7 Frequently Used punctuation
symbols such as ，。、：；？！. When press the right button, the
system will input the rst symbol. Press it again to replace with the next
symbol and so on.
Presenter Mode: In the Presenter mode, the right button acts as the
page down function to show the next page.
4. Laser point button: Press the laser point button to highlight the main
points in your presentation with the red laser light.
5. LCD monitor: Press the timer setting button (See item 11) after 5 sec-
onds, the LCD monitor will display the left time and alarm you at 2, 5
minutes left and time is up with the gentle red ash. This monitor also
displays the current mode information. [P] represetns Presenter Mode
and [H] represents Handwriting Mode.
6. Writing/Mouse area:
Handwriting Mode: Writing in this area.
Presenter Mode: When pull the stylus out, you can use this area as a
mouse pad.
7. Laser light: When press the laser point button (See item 4), it will turn
1-4
Wireless Pen
this red laser light on.
8. ID matching button: If there is more than two Wireless Pens or other
wireless devices around you and interference your writing or presenta-
tion, you may push ID matching button to match your Wireless Pen
and your wireless receiver. Please refer to 2.7 ID Code Matching for
details.
9. Power On/Off switch: While Wireless Pen is not in use, please turn the
power off to save the battery life.
10. Battery cover: Push the wedge of the battery cover upward to open the
battery cover, and put two AAA batteries in with the positive electrode
in the right side. When the electric power is insufficient, the LCD
monitor will display “Lo” in the timer screen to remind you to replace
the battery.
11. Stylus pen: Pull the stylus pen out to write or use it as a mouse. Place it
back, when you do not need to use the stylus pen.
12. Timer setting button: Let you set the presentation time. Press it once,
add 5 minutes and so on. The remaining time will display on the LCD
monitor. (See item 5)
Tip: Press and hold the [Timer setting button] for a while, you can reset
the timer.
13. Side Button (Backspace/Black screen button):
Handwriting Mode: Remove a character before the cursor.
Presenter Mode: Press this button during the presentation to display
the black screen. Press it again to display the previous screen.
14. Presenter/Handwriting mode switch: Switch up to the [Presenter
Mode]. Switch down to the [Handwriting Mode].
Chapter 2 Installation and Settings
2-1
Chapter 2 Installation and Settings
2.1 System Requirements
1. Windows 7/Vista/XP
2. 32 bit OS: At least 1GB of available hard disk space
64 bit OS: At least 2GB of available hard disk space
3. USB port
2.2 Handwriting Software Installation
Please insert CD-ROM disc into the CD-ROM drive and the system
will automatically launch setup.exe. Select the [Setup Wireless Pen] option.
Note: If you don’t have CD-ROM drive, or you lost your CD-ROM disc,
please go to PenPower’s website (http://www.penpower.net) and
choose your country/ region site to download the software.
2-2
Wireless Pen
2. Please exit all of the Penpower applications to ensure that the install/re-
pair process will run properly. Click [Next] to continue.
3. Please read the license agreement, select [I accept the terms of the li-
cense agreement], and click [Next].
Chapter 2 Installation and Settings
2-3
4. Select the destination location. Click [Next].
5. Select the program folder. Click [Next].
2-4
Wireless Pen
6. Click [Install] to begin the installation.
7. When the installation is completed, click [Finish] to exit.
Chapter 2 Installation and Settings
2-5
2.3 Hardware Connection
1. Open the battery cover of the Wireless Pen hardware and put two AAA
batteries in.
2. Turn on the power. Pull the wireless receiver out from the Wireless Pen
hardware, and plug it to the USB port of your computer.
Tip: If any signal interference, you can connect the wireless receiver to
an extension USB cable to avoid the interference equipment.
2.4 Run Wireless Pen Handwriting System
Run [Start/All Programs/Wireless Pen/Wireless Pen] to open the Wire-
less Pen window.
2.5 Registration
A register reminder window will pop up when you launch Wireless Pen
for the rst time . It reminds you registering your product at http://www.
penpower.net/reg.html for ensuring the warranty service. Click [Register
now] to register. If you click [Register later], you may skip it and register
later. If you have registered, please click [I’m already registered], this re-
minder will not display next time you launch this application.
2-6
Wireless Pen
2.6 Calibration
When you rst time launch the
Wireless Pen, the system will ask
you to calibrate the Wireless Pen.
Tip : After calibration, the new conguration would take effect immedi-
ately. You do not need reboot or reload handwriting system.
1. Switch the [Presenter/Handwrit-
ing mode switch] downward to
the [Handwriting mode].
2. Click on the top-left corner spot
of touch pad by the writing pen.
3. Click on the bottom-right corner
spot of touch pad by the writing
pen.
4. Click on [OK] to nish the cali-
bration.
In the future, if you nd that your handwriting on the screen is not on
the right location, you need to calibrate your Wireless Pen. Please click the
menu icon and select [Settings]/ [Tablet setting]/ [Tablet calibra-
tion] to launch the calibration window.
Chapter 2 Installation and Settings
2-7
2.7 ID Code Matching
After you connected the Wireless Pen and launched the Wireless Pen,
you should able to write right away. If there are more than two Wireless
Pens or other wireless devices around you and interference your writing or
presentation, you may match your Wireless Pen and your wireless receiver.
1. Please mouse mouse click the function menu button and select
[Settings]\ [Tablet setting]\ [ID code matching] to launch the ID code
matching function.
2. Press the [ID matching] button on the back side of the Wireless Pen.
3. An [ID-matching is successful] window appears when the ID matching
is done.
Table of contents
