Pokini i User manual

User Manual
English

3
Introduction
1.1 Package Contents
 1.2Hardwarespecications
1.3 Pokini features
Quick start guide
2.1 Connecting Pokini i
2.2 Booting Linux
(applies for Pokini Linux)
2.3 Booting Windows 7
(applies for Pokini Windows 7)
2.4 BIOS
Maintenance
3.1Afxingrubberfeet
3.2 Installing hard disk
Drivers
Support
5
5
6
8
11
11
12
12
12
13
13
14
15
15

4

5
Introduction
1.1 Package contents
1. Pokini i computer
2. 12V DC power supply (Input 100 - 240 V AC 50/60 Hz, Output 12V
DC 5A, DC plug with locking ) cord length approx. 150cm
3. Powercable(GermanandUS)
4. 3.5mm to cinch audio jack
5. HDMI to DVI adapter
6. 2x WiFi antenna
7. 4xrubberfeet
For starting up your Pokini, you will need:
■A display with HDMI / DVI or DisplayPort input and the needed
 cable.Plus,aUSBmouseandkeyboard.
1
2
3
5
4
7
6

6
1.2 Hardware specifications
CPU Intel®Celeron 827E (64bit,1x1,4GHz,512KBCache)*
Intel®Celeron 847E (64bit,2x1,1GHz,512KBCache)*
Intel®Corei3-3217UE(64bit,2x1,6GHz,512KBCache)*
Intel®Corei7-3517UE(64bit,2x1,7GHz,512KBCache)*
Chipset Intel® 6/7SeriesSystemControllerHub
Memory 2 slots for DDR3 SO-DIMM(1333)
(max.16GB)
Storage Internalslotfor2.5″SSD(max9,5mm)
Display & Graphics Intel®HDGraphics2000*
Intel®HDGraphics3000*
Intel®HDGraphics4000*
HDMI >resolutionupto1920x1200with60Hz
DisplayPort > resolution 2560 x 1600 with 60 Hz
Audio 7.1 channel S/PDIF in/out
Network 2x 1000 BaseT RJ45 Ethernet
WLAN802.11b/g/n(MiniPCIwithBT4.0)
USB 2xUSB2.0(480Mb/s),2xUSB3.0(5Gb/s)
Serial mini RS232 (Attention! No adapter included)
eSATA 2x eSATA
Additional Features 2x WLAN antenna connectors
Hardware
* depends on model

7
Case 100%aluminum/diecastbody
Dimensions 190x160x40mm
Weight 1100g incl. SSD
Operating
Temperature 0 – 70 °C with SSD
Power Supply 12Vpowersupply,screwablepowerplug
Power Consumption Idle Modus (S0): 10 watts
Standby(S3):2watts
Soft Off (S5): 2 watts
Mechanical and Environmental
BIOS Phoenix BIOS
Supportedbootdevices:USBthumbdrive,
USBharddisk,network
Operating System Windows®7
Linux Mint 13 (www.pokini.de) for download
(Otheroperatingsystemscanbeinstalledbyuser)
Software

8
1.3 Pokini Features
USB
OnthebackofthePokini,followingportscanbefound:
 2xUSB2.0with480Mbps
 2xUSB3.0(blue)with5Gbps
AllportsdoalsosupportHighspeedUSB2.0.
Serial Port
ThereisaMini-RS232portlocatedontheback.AminiserialtoDB9
adaptercanbepurchasedseparately.
HDMI
DisplayPort
WLAN antenna
2xUSB3.0
Serial
Audio in/out
Power Button
Power plug
(screwable)
2xUSB2.0
2x LAN
2x eSATA

9
DVI
The Pokini i has HDMI and a DisplayPort.
1. HDMI with audio
2. DisplayPort
TobeabletouseaDVIdisplay,usetheHDMI→DVI adapter.
Pleaseconsiderthattheaudiohastobeconnectedseparately.
Audio
Onthebackofthecasethereare2built-instandard3,5mmaudiojacks.
Right:
□Stereo line-out with 3,5mm jack
□S/PDIF7.1withtheshippedcable
Left:
□Stereo line-in with 3,5mm jack
□S/PDIF7.1withtheshippedcable
LAN
Pokini has 2x 10/100/1000 BaseT Ethernet ports using standard RJ45
connectors.UseastandardEthernetcabletoforconnecting.
Theconnectorhasbuilt-inLEDsthatarelitwhenaconnectionisdetected.

10
WLAN
ThePokiniicomeswithaAzureWavemodule(MiniPCI)installed,which
supportsWLANb/g/n.ThemoduleincludesBluetooth4.0aswell.
Power button
Pokinihasatactilepowerpush-button.Itisusedforturningon/offthe
Pokiniandforstandby/resumewhensupportedbytheoperatingsystem.
A push of at least 5 seconds will always turn off the Pokini.
→ Note: Pokini supports auto-on. When connected to power, it will
power-up automatically.
LEDs
The Pokini logo on the front lights up when the system is powered off (Po-
wer LED).
Whenthelogoisblinking>harddriveactivity
Additional hardware (front modules)
TherearedifferentfrontmodulesavailableforthePokinii.Withthesemo-
dules you can extend the functionality of it.
■4x RJ45 1000 Base T Ethernet (Intel 82583V)
 and4xUSB2.0(480Mbps)
■ 1xRJ451000BaseEthernet(RT28111)and4xUSB2.0(480Mbps)
■2x mini PCIe slots (fullsize)
Thesemodules(Funktions-ConnectivityExtensionModules)areextension
cardswichcanbeinstalledinternallytoincreasetheconnectionpossibili-
ties.

11
Quick start guide
2.1 Connecting Pokini i
■Turn off the display and connect it to the Pokini HDMI connector
(use the HDMI to DVI adapter if needed).
■ ConnecttheUSBkeyboardandmousetoUSBconnectors.
■Plug the speakers into the line-out jack.
■ PlugtheEthernetcableintotheEthernetconnector.
■ MounttheWiFiAntennaontheSMAconnectorbyturningit
 clockwiserepeatedlyuntiltheantennaholdsrm.
■Insert the DC plug into the Pokini DC in jack.
■It is recommended to secure the power plug using the
adjacent screw.
■Connect the power supply to the AC cord and plug the cord into
 ACoutlet.ThepowerLEDshouldlightupasthePokiniboots.

12
Linux Mint 13 loads automatically on power up.
Login:
 Username:  pokini
Password: rootroot
Uponrstpower-up,youwillbeguidedthroughtheWindowsWelcome
procedurewhichisself-explanatory.TheWindows7serialnumberisprin-
tedontheWindows7labelonthebottomofyourPokini.
Press „F2“ for the BIOS screen to show.
Forenteringthebootmenu,hit„F5“whilebooting.
2.2 Booting Linux (applies to Pokini Linux)
2.3 Booting Windows 7 (applies to Pokini Win7 )
2.4 BIOS

13
Maintenance
The Pokini requires no maintenance. You should not take the Pokini apart -
thiswillvoiditswarranty.
Thefollowingoperationscanbeconductedbytheuser:
YoushouldsticktherubberfeettothebottomofthePokinitoprotectthe
supporting surface.
Recommendedrubberfeetplacementisshownbelow:
3.1 Affixing rubber feet

14
3.2 Installing Hard Disk
1. Openthescrewsonthebackasshownbelow.
2. Slidethecovertillblock-approx.10mm.
3. Thecoverisnowdetached.Liftthecoveronthesidetoremoveit 
completely.

15
Accessories: (not included)
■VESA mount
■VESA mount for mounting the Pokini on a wall or TFT display
■Cap rail mount
Drivers
AlldriverscanbefoundontheincludedCD
or on the internet: www.pokini.de → Products → Pokini i → Downloads
Support
Youcanndloadsofanswersforthemostcommonquestionson
www.pokini.de
Ifyouhavegotmorequestionsorproblems,pleasesendusanemailto:
[email protected]
You have questions of a technical manner?

All rights reserved. © 2014 EXTRA Computer GmbH
V 1.0 / 05-2014
*4050487715184*