People & Technology IP-BS-US Manual

Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved
IP-BS-US
Setting Manual
FCC ID:2AS6EIP-BS-US

2
Contents
1. Introduction ----------------------------------------
2. IP-BS-US --------------------------------------------
3. Hardware Specification ----------------------------
4. Scanner Install Location ----------------------------
5. Scanner Installation ---------------------------------
6. How to set up the scanner -------------------------
7. FAQ --------------------------------------------------
8. Special Note ------------------------------------------ 16
3
4
5
6
7
8
15
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

።Purpose
This document provides basic guidelines for customers who
use products designed by People & Technology.
።Range
The scope of this document is to provide software descriptions
and general instructions from IP-BS-US.
።Object
This document is intended for customers using People &
Technology's IP-BS - US.
።Question
Please contact http://www.pntbiz.co.kr for technical support
and documentation errors.
3
Introduction
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

።Component Description
4
1) IP-BS-US Scanner Body
2) Antenna
* If the component is missing or damaged, contact your place of
purchase. Please keep the boxes and packaging materials in case of
return.
IP-BS-US
1) Scanner Body
2) Antenna
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

5
Hardware Specification
Features Description
CPU TI CC3200
ARM® Cortex® -M4 Core at 80 MHz
Memory RAM (Up to 256KB)
Storage External S-Flash
Network 802.11 b/g/n
BLE Scanner + Peripheral (nRF52832 x 2)
Antenna BLE x2 / Wi-Fi x1
Power USB Port (With USB to UART)
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

This scanner can be connected to the network anywhere
within the range of the wireless network. However, the
operating distance of the scanner, the range of wireless
connections, may vary significantly depending on the
physical arrangement of the scanner. For example, the
thickness and number of walls that a wireless signal
passes through can limit the scope of the scanner.
- It is recommended to be near the WiFi router.
- Stay away from potentially interfering devices.
- Stay away from solid metal doors or metal surfaces.
- Glass, insulated walls, tanks, mirrors, bricks, and concrete
can affect radio signals.
6
Scanner Install Location
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

።Scanner Installation
1. Connect the scanner to the USB DC adapter.
2. Check the LEDs on the scanner.
1. Powered On
2. WiFi (AP) Connected
3. BT Signal Received
4. Data Transmitted
PWR BT Wi-Fi
PWR BT Wi-Fi
PWR BT Wi-Fi
PWR BT Wi-Fi
Blinking
7
።LED Scenario
Scanner Installation
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

1. Run the settings
app provided.
After launching the app,
click the button
in the lower right corner
to search for the scanner.
2. Select the scanner
you want to set from the list.
8
How to set up the Scanner
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

3. Enter the PIN number
you received.
(It can only be connected
within 30 seconds of power on.)
4. Enter PIN number
and the screen
for setting up the scanner
will be displayed.
9
How to set up the Scanner
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

6. Click the "SEARCH" button
in the top right corner
to start WiFi scanning.
5. Click the
“SCAN SSID" button.
10
How to set up the Scanner
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

8. Check the
selected WiFi SSID.
7. Select the WiFi
you want to connect to
from the list.
11
*5GHz band is not supported
How to set up the Scanner
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

9. Enter your
WiFi password.
12
10. Check the scanner ID.
How to set up the Scanner
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

12. The scanner
becomes a beacon and
can send a beacon signal.
11. Enter the server information
to which the scanner
will send data.
(Default value is
WMS server information)
13
How to set up the Scanner
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

14. When the setting
is complete, click the
" Save " button
to finish the setup.
13. Change to ON to set
UUID, Major, Minor,
Tx Power, Interval, and so on.
(USB Beacon information can
also be changed by WMS)
14
How to set up the Scanner
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

15
Q1. If you USB Scanner not found.
A1. Turn off the scanner, power it back up, and try
connecting It. can only be connected within 30
seconds of power on.
Q2. If you unable to connect to WiFi SSID.
A2. Please check your WiFi information and router settings.
Q3. If you forgot ID and password.
A3. Please contact the place of purchase or head office.
Q4. If you want to buy an antenna.
A4. Please contact the place of purchase or head office.
If you have any questions, please contact
http://www.pntbiz.com
FAQ
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

16
* Bonding of scanner body and antenna
When IP-BS-US is purchased by customers, the scanner
body and the antenna of IP-BS-US is to be bonded firmly
and then delivered to the customer to avoid separation of
body and antenna.
* Separation of antenna is restricted for proper working
We are NOT GAURANTEE of proper working of IP-BS-US
in such a case when customer separates antenna of IP-BS-
US from its body at any reason.
Special Note
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.

www.pntbiz.com
Copyright ⓒ2018 People & Technology Co., Ltd. All Rights Reserved