Perfect Aire 3PASC10000 User manual

10,000 BTU
Before using your casement/slider air
conditioner, please read this manual
carefully and keep it for future
reference, along with your receipt.
Your Source for Home Comfort
FOR MODELS:
3PASC10000
CASEMENT/SLIDER
AIR CONDITIONER
USER MANUAL

1
!CAUTION
This manual provides the information needed for proper use and maintenance of this air
conditioner. Basic preventative care can help extend the life of this unit. The “Troubleshooting
Tips” section in this manual contains a chart with solutions to the most common problems.
Referring to this section may save time and prevent the need for a service call in the event of
a problem.
Ɣ&RQWDFWDQDXWKRUL]HGVHUYLFHWHFKQLFLDQIRUUHSDLURUPDLQWHQDQFHRIWKLVXQLW
Ɣ&RQWDFWDQLQVWDOOHUIRULQVWDOODWLRQRIWKLVXQLWLIQHFHVVDU\
ƔThe air conditioner is not intended for use by young children without supervision.
Young children should be supervised to ensure that they do not play with the air conditioner.
Ɣ'LVDEOHGSHUVRQVPD\UHTXLUHDVVLVWDQFHZLWKVHWXS
Ɣ,IWKHSRZHUFRUGLVWREHUHSODFHGUHSODFHPHQWZRUNVKRXOGEHSHUIRUPHGE\DXWKRUL]HG
personnel only.
Ɣ,QVWDOODWLRQDQGUHSDLUZRUNPXVWEHSHUIRUPHGLQDFFRUGDQFHZLWKWKHQDWLRQDOZLULQJ
VWDQGDUGVE\DXWKRUL]HGSHUVRQQHORQO\
Ɣ'RQRWRSHUDWH\RXUDLUFRQGLWLRQHULQDZHWURRPVXFKDVDEDWKURRPRUODXQGU\URRP
Ɣ8QLWVZLWKDKHDWLQJIXQFWLRQVKRXOGEHDWOHDVWIWPHWHUDZD\IURPDQ\FRPEXVWLEOH
flammable materials.
NOTE: All the illustrations in this manual are for explanation purposes only. Unit purchased
may be slightly different.
The design and specifications are subject to change without prior notice for product
improvement. Contact customer service for details.
CONTENTS
SAFETY PRECAUTIONS..................................................................................... 2
IMPORTANT SAFETY INSTRUCTIONS...............................................................4
INSTALLATION INSTRUCTIONS.........................................................................5
NORMAL SOUNDS ............................................................................................13
AIR CONDITIONER FEATURES........................................................................13
CARE AND CLEANING.......................................................................................16
TROUBLESHOOTING TIPS................................................................................17

7RSUHYHQWLQMXU\WRWKHXVHURURWKHUSHRSOHDQGSURSHUW\GDPDJHWKHIROORZLQJLQVWUXFWLRQV
must be followed. Incorrect operation due to ignoring of instructions may cause harm or
damage. 7KHVHULRXVQHVVLVFODVVL¿HGE\WKHIROORZLQJLQGLFDWLRQV
SAFETY PRECAUTIONS
This symbol indicates the possibility of death or serious injury.
Meanings of symbols used in this manual are as shown below.
!
Always do this.
Never do this.
CAUTION
This symbol indicates the possibility of injury or damage to property.
Plug in power plug properly.
Do not modify power cord
length or share the outlet with
other appliances.
Always ensure effective
grounding.
Always unplug the unit if
strange sounds, smell or
smoke comes from the unit.
Do not use firearms near unit.
Ventilate room before operating air conditioner if
there is a gas leakage from another appliance
such as a stove.
Failure to do so may cause
HOHFWULFVKRFNRUILUHGXHWR
excess heat generation.
'RLQJVRPD\FDXVHHOHFWULF
VKRFNRUILUHGXHWRKHDW
generation.
Incorrect grounding may cause
HOHFWULFVKRFN
Failure to do so may cause fire
DQGHOHFWULFVKRFN
'RLQJVRPD\FDXVHILUH
)DLOXUHWRGRVRPD\FDXVHH[SORVLRQ
fire and burns.
'RLQJVRPD\FDXVHHOHFWULF
VKRFNRUILUHGXHWRKHDWJHQHUDWLRQ
'RLQJVRPD\FDXVHHOHFWULFVKRFN
'RLQJVRPD\FDXVHIDLOXUHRI
PDFKLQHRUHOHFWULFVKRFN
'RLQJVRPD\FDXVHILUHDQG
HOHFWULFVKRFN
'RLQJVRPD\FDXVHILUHDQG
HOHFWULFVKRFN
'RLQJVRPD\FDXVHHOHFWULFVKRFN
or fire. If the power cord is
GDPDJHGLWPXVWEHUHSODFHGE\WKH
PDQXIDFWXUHURUDQDXWKRUL]HG
VHUYLFHFHQWHURUDVLPLODUO\TXDOLILHG
SHUVRQLQRUGHUWRDYRLGDKD]DUG
This could cause health issues.
Incorrect installation may cause fire
DQGHOHFWULFVKRFN
'RLQJVRPD\FDXVHHOHFWULFVKRFN
'RLQJVRPD\FDXVHDQH[SORVLRQRUILUH
'RLQJVRPD\FDXVHIDLOXUHDQG
HOHFWULFVKRFN
Do not operate or stop the unit
by inserting or pulling out the
power plug directly from the wall.
Do not operate with wet hands
or in damp environment.
Do not allow water to run into
electric parts.
Do not use the socket if it is
loose or damaged.
Do not use the power cord close
to heating appliances.
Do not use a damaged power
'RQRWGLUHFWDLUÀRZGLUHFWO\DW
room occupants.
Always install circuit breaker
and a dedicated power circuit.
Do not open the unit during
operation.
Do not disassemble, modify,
or drill holes into the air
conditioner.
!
!
!
!
!
WARNING
! !
!
! !
!
cord.
Do not use the power cord near flammable gas
or combustibles, such as gasoline, benzene,
thinner, etc.
!
!!
!
!
WARNING
2

3
When removing air filter, do not
touch metal parts of the unit.
'RLQJVRPD\FDXVHDQLQMXU\.
Cleaning unit when power is ON
PD\FDXVHILUHDQGHOHFWULFVKRFN
and may cause an injury.
Operation with windows open may
cause moisture to enter the room.
Stop operation and close the
window in severe storms or
hurricanes.
Do not clean with water.
Water may enter the unit and
degrade the insulation causing an
HOHFWULFVKRFN
This could injure the pet or plant.
Failure to do so may cause electric
VKRFNDQGGDPDJH
Do not put a pet or house plant
where it will be exposed to
direct air flow.
Hold the plug by the head of the
power plug when taking it out.
Ensure proper ventilation
especially in rooms with a stove
or other appliances.
Failure to do so may result in an
oxygen shortage.
This unit is NOT intended to
SUHVHUYHSUHFLVLRQGHYLFHVIRRG
SHWVSODQWVDQGDUWREMHFWV,WPD\
FDXVHGHWHULRUDWLRQRITXDOLW\HWF
Leaving power on may cause unit
failure or fire.
Use only as intended.
If unit will not be used for a long
period of time, turn OFF main
power switch.
If water enters the unit, turn the unit off at the power
outlet and switch off the circuit breaker. Isolate supply
by taking the power-plug out and contact a qualified
serviced technician.
Obstacles may cause appliance
failure or accident.
Cleaners or detergents may change
the color or scratch the surface of
the unit.
Do not place obstacles around
air-inlets or inside of air-outlet.
Use only a soft cloth to clean
the unit.
Prolonged exposure to outdoor
elements may cause damage to
LQVWDOODWLRQEUDFNHWFDXVLQJXQLWWR
fall.
7KHUHLVGDQJHURIHOHFWULFVKRFN
Periodically check installation
bracket for damage.
.
Operation without secured filters
may cause failure. A dirty filter
can cause the unit to not run
efficiently.
Water from unit contains
contaminants and could cause
illness.
Always insert the filters securely.
Clean filter AT LEAST once
every two weeks.
NEVER drink water drained from
air conditioner.
Unit and Circuit breaker/fuse
must be switched OFF when
cleaning.
Do not place heavy objects on the power cord
and always ensure that the cord is not
compressed.
Use caution when unpacking
and installing.
Sharp edges could cause injury.
!!
!! !
!
!
!!
!
!
7KHUHLVGDQJHURIILUHRUHOHFWULFVKRFN
!
CAUTION
Electrical Shock and
Personal Injury Hazard
Meeting Electrical Requirements
WARNING
!
• ElectricaOJURXQGLVUHTXLUHGRQWKLVDSSOLDQFH
'2127JURXQGWRDJDVOLQH
,IFROGZDWHUSLSHLVLQWHUUXSWHGE\XVLQJSODVWLFQRQ
PHWDOOLFJDVNHWVRURWKHULQVXODWLQJPDWHULDOV'2127XVH
for grounding.
&KHFNZLWKDTXDOLILHGHOHFWULFLDQLI\RXDUHLQGRXEWDVWR
whether the appliance is properly grounded.
'2127PRGLI\SRZHUVXSSO\FRUGSOXJ,ILWGRHVQRWILWWKH
RXWOHWKDYHDSURSHURXWOHWLQVWDOOHGE\DTXDOLILHGHOHFWULFLDQ
'2127KDYHDIXVHLQWKHQHXWUDORUJURXQGLQJFLUFXLW
$IXVHLQWKHQHXWUDORUJURXQGLQJFLUFXLWFRXOGUHVXOWLQDQ
HOHFWULFDOVKRFN
'2127XVHDQH[WHQVLRQFRUGZLWKWKLVDSSOLDQFH
Failure to follow these instructions could result
in electrical shock, serious injury, or death.
Observe all local governing codes and ordinances.
Do not, under any circumstances, remove the power
supply cord grounding prong.
NOTE: ,IFRGHVSHUPLWDQGDVHSDUDWHJURXQGLQJZLUHLVXVHG
LWLVUHFRPPHQGHGWKDWDTXDOLILHGHOHFWULFLDQdetermine that the
JURXQGLQJSDWKLVDGHTXDWHDQGQRWLQWHUUXSWHGE\SODVWLF
QRQPHWDOOLFJDVNHWVRURWKHUinsulating materials.
Receptacle Wiring
5HFHSWDFOHZLULQJVKRXOGEHDPLQLPXPRIJDXJHUse copper
wire only. It is your responsibility to provide SURSHUDQGDGHTXDWH
UHFHSWDFOHZLULQJLQVWDOOHGE\DTXDOLILHGHOHFWULFLDQ
Electrical Requirements
$WLPHGHOD\IXVHRUWLPHGHOD\FLUFXLWEUHDNHULVDOVRUHTXLUHG$
VHSDUDWHFLUFXLWVHUYLQJRQO\WKLVDSSOLDQFHMUST be provided.

4
7RUHGXFHWKHULVNRIILUHHOHFWULFDOVKRFNRULQMXU\WRSHUVRQVZKHQXVLQJ\RXUDLUFRQGLWLRQHUIROORZEDVLFSUHFDXWLRQV
including the following:
,IWKHDLUFRQGLWLRQHULVWREHLQVWDOOHGLQDZLQGRZ\RXZLOOSUREDEO\ZDQWWRFOHDQERWKVLGHVRIWKHJODVVILUVW,IWKHZLQGRZ
LVDWULSOHWUDFNW\SHZLWKDVFUHHQSDQHOLQFOXGHGUHPRYHWKHVFUHHQFRPSOHWHO\EHIRUHLQVWDOODWLRQ
Be sure the air conditioner has been securely and correctly installed according to the installation instructions in this manual.
Save this manual for possible future use in removing or installing this unit.
:KHQKDQGOLQJWKHDLUFRQGLWLRQHUEHFDUHIXOWRDYRLGFXWVIURPVKDUSPHWDOILQVRQIURQWDQGUHDUFRLOV
IMPORTANT SAFETY INSTRUCTIONS
%HVXUHWKHHOHFWULFDOVHUYLFHLVDGHTXDWHIRUWKHPRGHO\RXKDYH chosen.
7KLVLQIRUPDWLRQFDQEHIRXQGRQWKHVHULDOSODWHZKLFKLVORFDWHGRQWKH
side of the cabinet and behind the grille.
%HVXUHWKHDLUFRQGLWLRQHULVSURSHUO\JURXQGHG7RPLQLPL]HVKRFNDQGILUH
KD]DUGVSURSHUJURXQGLQJLVLPSRUWDQW7KHSRZHUFRUGLVHTXLSSHGwith a
WKUHHSURQJJURXQGLQJSOXJIRUSURWHFWLRQDJDLQVWVKRFNKD]DUGV
Your air conditioner must be used in a properly grounded wall receptacle. If
WKHZDOOUHFHSWDFOH\RXLQWHQGWRXVHLVQRWDGHTXDWHO\JURXQGHGRU
SURWHFWHGE\DWLPHGHOD\IXVHRUFLUFXLWEUHDNHUKDYHDTXDOLILHGHOHFWULFLDQ
install the proper receptacle.
Ensure the receptacle is accessible after the unit installation.
'RQRWUXQDLUFRQGLWLRQHUZLWKRXWVLGHSURWHFWLYHFRYHULQSODFH7KLVFRXOG
result in mechanical damage within the airconditioner.
WARNING!
'2127VWRUHRU use gasoline or other IODPPDEOHYDSRUVRUOLTXLGVLQ
the vicinity of this or any other appliance.
$YRLGILUHKD]DUGRUHOHFWULFVKRFN'2127XVHDQH[WHQVLRQFRUGRU
DQDGDSWRUSOXJ'2127UHPRYHDQ\SURQJIURPWKHSRZHUFRUG
WARNING!
NOTE The power supply cord with
this air conditioner contains a current
detection device designed to reduce
WKHULVN of fire.
Please refer tothe section "Operation
RI&XUUHQW'HYLFHEHORZIRUGHWDLOV
In the event that the power supply cord
is GDPDJHGLW0867EHUHSODFHGE\
DQDXWKRUL]HGUHSDLUPDQ
Operation of Current Device
. Plug in the air conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST
EXWWRQ7KH5(6(7EXWWRQZLOOFOLFNDVLWSRSVRXW
.3UHVVWKH5(6(7EXWWRQDJDLQ\RXZLOOQRWLFHDFOLFNDVWKHEXWWRQHQJDJHV
. The power supply cord is now supplying electricity to the unit.
2QVRPHSURGXFWVWKLVLVDOVRLQGLFDWHGE\DOLJKWRQWKHSOXJKHDG
NOTES:
'RQRWXVHWKLVGHYLFHWRWXUQWKHXQLWRQRURII
$OZD\VPDNHVXUHWKHRESET button is pushed in for correct operation.
The power supply must be replaced if it fails to reset when either the TEST button is pushed or it cannot be reset.
,ISRZHUVXSSO\FRUGLVGDPDJHGLWFDQQRWEHUHSDLUHG3OHDVHFDOOFXVWRPHUVHUYLFHWRDVVLVWZLWKUHSODFHPHQW
TEST
RESET
Plug in &
press RESET
NOTE: Some plugs have
buttons on the top.
DO NOT, under any
circumstances, cut,
remove, or bypass
grounding prong.
Power supply cord
with 3-prong grounding plug
and currentdetection device
The power supply cord contains a current device that senses damage to the power
cord. To test your power supply cord do the following:
NOTE:This air conditioner is designed to be operated under conditions as follows:
If the unit is opeUDWHGEH\RQGWKHFRQGLWLRQVVSHFL¿HGDERYHLWPD\FDXVHDIDilure of the unit.
Cooling operation Outdoor temp: &)&)IRUVSHFLDOWURSLFDOPRGHOV
Indoor temp: &)
For Your Safety
Electrical Information
WARNING! Prevent Accidents
Do not use an extension cord or an adaptor plug.

5
Preparing for Installation
Installation Tips:
For wood-frame casement windows:
,WPD\EHQHFHVVDU\WRFRQVWUXFWDIUDPH
XVLQJDWOHDVWLQFKWKLFNZRRGZLWKD
LQFKZLGHRSHQLQJ
For brick or cement building construction:
It may be necessary to put a wood stool strip
XQGHUWKHXQLWIRUPRXQWLQJSXUSRVHV
1. Make sure you have
all the necessary parts.
Installation kit contents:
3ODWIRUP
6XSSRUWEUDFH
$GMXVWPHQWEROW
+H[IODQJHQXW´
7UDFNVHDO
6LGHFKDQQHOVHDO
)RDPVHDOVWULSVDVKVHDO
6DIHW\EUDFNHW
6FUHZ´RU
6FUHZ´RU
6FUHZ´
6FUHZ´
6FUHZ´VHOIWKUHDGLQJ
:LQGRZORFNLQJEUDFNHW
3ODVWLFZLQGRZSDQHO
6LGHFKDQQHO
6FUHZ´
3DQHOIUDPHVHDODVVHPEO\
Tools Required
(Not included):
)ODWKHDGVFUHZGULYHU
3KLOOLSVKHDGVFUHZGULYHU
Carpenter’s level
Tape measure
Fine tooth saw
Electric or hand drill
127(7KHVHLQVWUXFWLRQVGHVFULEHLQVWDOODWLRQLQDW\SLFDOZRRGIUDPHGZLQGRZZLWKDZRRG6/,'(%<VDVK
or installation in a metal CASEMENT window. Modification may be necessary when installing in windows made
differently than those shown in these instructions.
INSTALLATION INSTRUCTIONS
Read these instructions completely and carefully.
IMPORTANT6DYHWKHVHLQVWUXFWLRQV
IMPORTANT2EVHUYHDOO
governing codes and ordinances.
Note to Consumer- Keep these
instructions for future reference.
Note to Installer- Be sure to leave these
instructions with the Consumer.
&RPSOHWLRQWLPH$SSUR[LPDWHO\KRXU
6NLOOOHYHO,QVWDOODWLRQRIWKLVDSSOLDQFH
UHTXLUHVEDVLFPHFKDQLFDOVNLOOV
We recommend that two people install this product.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the Warranty.
You MUST use all supplied parts and use proper
installation procedures as described in these
instructions when installing this airconditioner.
BEFORE YOU BEGIN
T
ools Re
q
uired
(
Not included
):
)O
D
WK
HDG

VF
U
H
Z
G
ULY
H
U
3KLOOLSVKHDGVFUHZGULYHU
C
arpenter’s level
Tape measur
e
Fin
e
t
oo
th
sa
w
El
ec
tri
c
o
r h
a
n
d
d
rill

2. Choose a proper sized window, as shown to the right.
NOTE: +HLJKWPHDVXUHPHQWPXVWEHRIDFOHDURSHQLQJDERYHPRXQWLQJ
SODWIRUP,QVRPHFDVHVGXHWRDYDULHW\RIVWRSDQGWUDFNDUUDQJHPHQWV
WKHDERYHGLPHQVLRQVPD\YDU\VOLJKWO\,IQHFHVVDU\LQVWDOODWLRQFDQEH
PDGHE\DOWHUQDWLQJZLQGRZMDPEV6HH$OWHUQDWH:LQGRZ-DPE
$SSOLFDWLRQVEHORZ
LQFKHVPLQLPXPZLGWK
LQFKHVPD[LPXPZLGWKIRUFDVHPHQWZLQGRZV
LQFKHVPLQLPXPKHLJKWZLWKZLQGRZSDQHOUHWDLQHU
LQFKHVPLQLPXPKHLJKWZLQGRZSDQHOUHWDLQHUUHPRYHG
LQFKHVPD[LPXPKHLJKW
3. Choose the proper window location.
Choose a window that allows the cooled air to flow
IUHHO\DQGGLUHFWO\LQWRURRPV\RXZLVKWRFRRO
5HPHPEHULWLVGLIILFXOWWRPRYHDLUDURXQGFRUQHUV
$OVRFKRRVHDZLQGRZWKDWLVZLWKLQIHHWRIDQHOHFWULFDO
RXWOHW6HH³0HHWLQJ(OHFWULFDO5HTXLUHPHQWV5HFHSWDEOH
:LULQJ1HHGV´RQ3DJH
'RQRWXVHDQH[WHQVLRQFRUG
LQFKHV
maximum
ZLGWKFDVHPHQW
ZLQGRZV
LQFKHV
minimum
width
LQFKHV
minimum
height
LQFKHV
maximum
height

RU 
RU
or
Identify Screws
By Length
mm
´
Pm
´
Pm
2 2”
´
mm
´
mm
NOTE: Use scale below to measure length of your screws.
The scale will be helpful when separating screws for installation.
6
INSTALLATION INSTRUCTIONS (CONTINUED)
To install in windows having no flanges or wood stops
RQWKHWRSDQGVLGHMDPEVWKHFKDQQHOVDQGSDQHO
IUDPHPXVWILWDJDLQVWDPRXQWLQJIODQJHRULQFK
PD[WKLFNDQJOHDWWDFKHGWRWKHZLQGRZMDPEV
Figure A shows this angle installed. Figures B & C
show alternate treatments. On the sash side of the
RSHQLQJWKHOHDGLQJFRUQHURIWKHLQQHUVDVKEHFRPHV
the flange. You can purchase the angle strip locally.

7
´


Window tracNWindow seal
Platform tab
Alternate screw location
Gepending on the stool depth
Installing Unit in a Sliding Window
1. Attach support brace to platform )LJ
Use adjustment bolt and hex flange nut to
complete assembly. Choose slot and adjustment
EROWKROHORFDWLRQVWKDWZLOOFUHDWHDGHJUHH
angle between platform and support brace. Try
assembly in the window to determine if platform
ZLOOUHVWSURSHUO\DQGDOORZSURSHUVORSH
´ORZHURQRXWVLGH
NOTE: ,I\RXDUHSODQQLQJWRXVHDVOLGLQJSURWHFWLRQ
ERDUG6HH6WHSRQWKHRXWVLGHRI\RXUKRXVHKROG
board in place when testing assembly of window.
2. Measure, and lightly mark a line 8 11/16” from
window jamb. )LJ
NOTE: ,IDQ\VDVKVWRSSURWUXGHVPRUHWKDQ´
IURPWKHVLGHZLQGRZMDPEVWKH´
measurement must be increased accordingly.
6FUHHQDQGVWRUPZLQGRZIUDPHVPD\DOVRUHTXLUH
adjustments to the measurement.
3. Center platform assembly. )LJDQG)LJ
Center the platform assembly on the line with inside
platform tab pressed against inside edge of window
WUDFN8VLQJWKHKROHVLQWKHSODWIRUPDVDJXLGH
PDUNDQGGULOOWZR´GLDPHWHUKROHV'ULOOKROHV
LQHLWKHUWUDFNRUVWRRO
4. Peel off protective backing from track seal. )LJ
1H[WDSSO\VHDOWRURRPVLGHRIZLQGRZWUDFN
Center of seal strip should coincide with the line
PDUNHGLQ6WHS7KHWZRVFUHZKROHVGULOOHGLQ
6WHSVKRXOGEHGLUHFWO\DERYHVHDOVWULSLQWKH
LQQHUWUDFN
5. Securely attach a siding-protection board to
side of house.)LJ
NOTE: 6LGLQJSURWHFWLRQERDUGVKRXOGEHORQJHQRXJK
to span 2 wall studs.
NOTE: Adjust the platform assembly so that the air
FRQGLWLRQHUZLOOEH´WR” lower than the front
WLOWHGDERXWºWRºGRZQZDUGWRWKHRXWVLGH$IWHU
SURSHULQVWDOODWLRQFRQGHQVDWLRQVKRXOGQRWGUDLQ
from the overflow drain hole during normal use.
<RXPD\VHHFRQGHQVDWLRQLQSHULRGVRIKLJKKXPLGLW\
+RZHYHULIFRQGHQVDWLRQRFFXUVGXULQJORZRUQRUPDO
KXPLGLW\DGMXVWWKHVORSHVOLJKWO\
CAUTION
!
Property Damage Hazard-Failure to adhere to
the following precaution could result in
damage to window or air conditioner.
%HVXUHZRRGVWRRORUZLQGRZWUDFNLVVHFXUHO\
attached to the building construction. Use longer
VFUHZVLQVXEIUDPLQJLIQHFHVVDU\
Fig. 1
Fig. 2
Fig. 3
Fig. 5
Fig. 4
Center Platform
assembly on the
line with platform
tab pressed against
ZLQGRZWUDFN
$SSO\WUDFNVHDOWR
ZLQGRZVLGHRIWUDFN
Fig. 6
INSTALLATION INSTRUCTIONS (CONTINUED)

8
Installing Unit in a Sliding Window (Continued)
6. Place platform assembly. )LJ
:LWKSODWIRUPWDEDJDLQVWLQVLGHRIZLQGRZWUDFN
place platform assembly and attach it to window
MDPE8VHDSSURSULDWHOHQJWKVFUHZV,WHPV
LQ3UHSDULQJ)RU,QVWDOODWLRQ
7. Adjust platform assembly.
Adjust the platform assembly so that the outside
HGJHLVLQFKHVORZHUWKDQLQVLGHHGJH)LJ
This ensures proper water drainage from the air
conditioner.
8. Level platform assembly from side-to-side.
$OVRPDNHVXUHZLQGRZWUDFNLVOHYHO8VHOHYHOLQJ
shims as necessary to ensure unit is level from
VLGHWRVLGH
9. Measure height of window opening.)LJ
Begin measuring height of window opening
from top of platform assembly as shown right.
6XEWUDFWLQFKHV0DUNWKLVPHDVXUHPHQW
RQSODVWLFZLQGRZSDQHODORQJWKHORQJHUVLGH
10. Clamp plastic window panel.
Clamp the plastic window panel between a board
DQGDZRUNWDEOHDQGFXWDORQJFXWWLQJOLQHZLWKD
fine tooth saw. Remove any burrs with a file.
11. Fasten side channels. )LJ
Fasten the side channels to the sides of the unit
XVLQJVFUHZV,WHPSDJHSHUFKDQQHO
6WDUWZLWKILUVWVFUHZDWWRSRIFKDQQHO0DNHVXUH
KRRNHQGVRIFKDQQHOVIDFHWRZDUGEDFNRIXQLW
12. Slide plastic window panel into panel frame.
)LJ6OLGHLQWKHZLQGRZSDQHOZLWKWKHVPRRWK
side to the room. Slide panel frame assembly into
VLGHFKDQQHOVRIWKH$&FDELQHW0DNHVXUHSODVWLF
window panel is firmly enclosed on all sides by
the retainer grooves.
13. Cut side channel seal. )LJ
&XWWKHVLGHFKDQQHOVHDOLQWRHTXDOOHQJWKV
5HPRYHSURWHFWLYHEDFNLQJDQGDSSO\LWWRWKH
UHDUVLGHRIFDELQHWVLGHFKDQQHOVVWDUWLQJMXVW
below panel frame assembly. Pinch off excess
length so seal is even with the bottom of the
cabinet side channel.
Fig. 7
Fig. 8 Fig. 9
Fig. 10
Apply weather
seal to side
channels just
below edge
of panel frame
Fig. 11
INSTALLATION INSTRUCTIONS (CONTINUED)
DSSUR[´WR¼”

9
Installing Unit in a Sliding Window (Continued)
14. To Remove Front )LJ
5HPRYHWKHWZRIURQWUHWDLQLQJVFUHZV
from the front frame.
2. Gently pull the front out and lift up to
release it from the case.
5HOHDVHWKHFRXSOHUSOXJV
NOTE:'2127SXVKRUSXOODLUGLUHFWLRQORXYHUV
15. Place AC in window opening.
The unit should sit on platform assembly so that
ZLQGRZSDQHOIUDPHDQGFDELQHWVLGHFKDQQHOV
DUHDJDLQVWWRSDQGVLGHZLQGRZMDPEV)LJ
16. Slide inner window sash firmly against side
of cabinet.
0DNHVXUHQRWWRSHHOWKHVHDOVWULSVIURPWKHZLQGRZ
WUDFNDQGFDELQHWVLGHFKDQQHOV,IWKHSDQHOIUDPH
GRHVQRWILWVQXJO\WRWKHLQQHUZLQGRZVDVKVHFXUH
WKHSDQHOIUDPHWRWKHVDVKZLWK´VFUHZVRU´
VHOIWKUHDGLQJVFUHZV8VHWKHSDUWLDOO\SOXJJHGKROHV
LQWKHSDQHOIUDPH'ULOO´SLORWKROHVIRUWKHVFUHZV
17. Hook the safety bracket. )LJ
7KHVDIHW\EUDFNHWVKRXOGEHKRRNHGRYHUWKHEDVH
of the unit and fastened to the front of the platform
DVVHPEO\8VHDLQFKVHOIWKUHDGLQJVFUHZ
NOTE: 7KHEUDFNHWSUHYHQWVPRYHPHQWRIWKHDLU
FRQGLWLRQHUHLWKHULQRURXWDIWHUFRPSOHWLQJWKH
installation.
18. Stuff the foam seal strip/sash seal.
Stuff the foam seal strip between the vertical sash and
WKHZLQGRZJODVV)LJ
19. Lock the inner window sash.
8VLQJWKHZLQGRZORFNLQJEUDFNHWORFNWKHLQQHU
window sash to the base of the outer window sash.
8VHRQH´VFUHZRU´VHOIWKUHDGLQJVFUHZ
'ULOO´SLORWKROH
20. To Replace the front.
)LUVWUHFRQQHFWWKHFRXSOHUSOXJV0DNHWKHH[KDXVW
control positioned through the front in the proper
ORFDWLRQ7KHQUHSODFHWKHUHWDLQLQJVFUHZVWKDWKROG
the panel in place. Do not push or pull the front louvers.
Front
Retaining
Screw
Fig. 12
Fig. 13
Slide inner
window sash
firmly against
cabinet
Fig. 14
Fig. 15
INSTALLATION INSTRUCTIONS (CONTINUED)

10
Installing Unit in a Casement Window
NOTE: Open the window the maximum amount to
DOORZIRUFOHDUDQFHRIWKHFDELQHW7KHFUDQNKDQGOH
should be removed to allow the platform to be
fastened to the jamb. If the window cannot open far
HQRXJKPRUHWKDQLQFKHVIRUWKHFDELQHWWR
FOHDUWKHZLQGRZUHPRYHWKHZLQGRZHQWLUHO\E\
drilling out the rivets. Bolts can serve as the rivots
in the future.
7RDYRLGFUDQNKDQGOHDQGZLQGRZFOHDUDQFH
SUREOHPVWKHXQLWFDQEHLQVWDOOHGLQDVWDWLRQDU\
VDVKVHFWLRQ+RZHYHUWKHKRUL]RQWDOPXOOLRQDQG
the 2 glass panels must be removed before installation.
1. Attach support brace to platform. )LJ
Use the adjustment bolt and hex flange nut to
complete the assembly. Choose the slot and
adjustment bolt hole locations that will create a
GHJUHHDQJOHEHWZHHQWKHSODWIRUPDQGWKH
support brace. Try the assembly in the window
WRGHWHUPLQHLIWKHSODWIRUPZLOOUHVWSURSHUO\
DQGDOORZWKHSURSHUVORSHLQFKORZHURQ
RXWVLGH
NOTE: If you are planning to use a VLGLQJSURWHFWLRQ
ERDUG6HH6WHSRQWKHRXWVLGHRI\RXUKRXVH
hold the board in place when testing the assembly
in the window.
2. Drill a 9/64 inch diameter pilot hole.
'ULOOWKHKROHLQWKHZLQGRZMDPEDQHTXDOGLVWDQFH
IURPHDFKVLGHRIWKHMDPE)LJDQGLQFKXSIURP
the window sill. If the hole coincides with the window
OHYHUVORWLQWKHMDPEERWWRPDQDGGLWLRQDOKROHZLOO
have to be drilled through the platform edge and the
window jamb to miss this slot.
3. Peel off the protective backing. )LJ
3HHORIIWKHEDFNLQJIURPWKHWUDFNVHDODQGVWLFN
the seal to the window sill on the outside of the
bottom jamb.
4. Screw the platform assembly to the window
jamb. )LJ
Screw the platform assembly using the pilot hole
GULOOHGLQ6WHS8VHDLQFKVHOIWKUHDGLQJVFUHZ
Fig. 1
Fig. 2 Fig. 3
Fig. 4
INSTALLATION INSTRUCTIONS (CONTINUED)

11
Installing Unit in a Casement Window (continued)
5. Adjust the platform assembly properly. )LJ
Adjust the platform assembly so that the rear
RIWKHDLUFRQGLWLRQHUZLOOEHLQFKHVORZHU
than the front. This ensures proper water drainage
from the air conditioner.
6. Securely attach a sliding-protection board. )LJ
Attach the board to the side of the house where
WKHSODWIRUPDVVHPEO\KLWWKHKRXVH7KHVLGLQJSURWHFWLRQ
board should be long enough to span 2 wall studs.
7. Measure the height of the window opening. )LJ
Measure from the top of the platform assembly.
6XEWUDFWLQFKHV0DUNWKLVPHDVXUHPHQW
RQWKHSODVWLFZLQGRZSDQHODORQJWKHORQJHUVLGH
8. Clamp the plastic window panel.
Clamp the plastic window panel between a board
DQGDZRUNWDEOHDQGFXWDORQJWKHFXWWLQJOLQHZLWK
a fine tooth saw. Remove any burrs with a file.
9. Fasten the side channels to the side of the unit.
8VLQJWKUHHVFUHZV,WHP3JSHUFKDQQHO
IDVWHQWKHVLGHFKDQQHOVWRWKHVLGHRIWKHXQLW0DNH
VXUHKRRNHQGVRIFKDQQHOVIDFHWRZDUGWKHEDFNRIXQLW
10. Slide the plastic window panel into panel frame.
)LJ
Slide the plastic window panel in with the smooth side
to the outside. Slide the panel frame assembly into the
VLGHFKDQQHOVRIWKHDLUFRQGLWLRQHUFDELQHW0DNHVXUH
the plastic window panel is firmly enclosed on all sides
by the retainer grooves.
11. Cut side channel seal. )LJ
&XWWKHFKDQQHOVHDOLQWRHTXDOOHQJWKV5HPRYHWKH
SURWHFWLYHEDFNLQJDQGDSSO\LWWRWKHUHDUVLGHRIWKH
FDELQHWVLGHFKDQQHOVVWDUWLQJMXVWEHORZWKHSDQHOIUDPH
assembly. Pinch off excess length so the seal is even with
the bottom of the cabinet side channel.
Fig. 5
Fig. 6
Fasten
VOLGLQJSURWHFWLRQ
board to the
house
siding.
Fig. 7
Fig. 8
Fig. 9
INSTALLATION INSTRUCTIONS (CONTINUED)
NOTE: Adjust the platform assembly so that the air
FRQGLWLRQHUZLOOEH´WR” lower than the front
WLOWHGDERXWºWRºGRZQZDUGWRWKHRXWVLGH$IWHU
SURSHULQVWDOODWLRQFRQGHQVDWLRQVKRXOGQRWGUDLQ
from the overflow drain hole during normal use.
<RXPD\VHHFRQGHQVDWLRQLQSHULRGVRIKLJKKXPLGLW\
+RZHYHULIFRQGHQVDWLRQRFFXUVGXULQJORZRUQRUPDO
KXPLGLW\DGMXVWWKHVORSHVOLJKWO\
DSSUR[´WR¼”

12
Installing Unit in a Casement Window
(Continued)
12. To remove front:)LJ
Remove the two front retaining screws from
the front frame.
Gently pull the front out and lift up to release
it from the case.
Release the coupler plugs.
NOTE: '2127SXVKRUSXOODLUGLUHFWLRQDO
louvers.
13. Place the air conditioner in the window
opening. )LJ
The air conditioner should sit on the platform
DVVHPEO\VRWKDWWKHZLQGRZSDQHOIUDPHDQG
the cabinet side channels are against the top and
side window jambs. Side channels should overlap
VLGHZLQGRZMDPEVHTXDOO\
14. Drill two 9/64 inch diameter pilot holes.
'ULOOWKHWZRSLORWKROHVLQWKHWRSZLQGRZMDPELQ
line with the partially plugged holes in the panel
frame. Secure the panel frame to the window jamb
ZLWKWZRLQFKVHOIWKUHDGLQJVFUHZV,IDGGLWRQDO
KROGLQJLVQHFHVVDU\WZRVFUHZVPD\EHXVHGRQ
the sides of the panel frame as well.
15. Drill screw-clearance holes.
'ULOOWZRVFUHZFOHDUDQFHKROHVLQWKHFDELQHWVLGH
FKDQQHOVQHDUERWWRPDQGWZRLQFKGLDPHWHU
pilot holes in the side window jambs. Secure the
cabinet side channels to the window jambs with
WZRLQFKVHOIWKUHDGLQJVFUHZV:KHQGRLQJ
WKLVEHFDUHIXOQRWWRWZLVWWKHVLGHFKDQQHOVHDOV
with the screws.
NOTE: Inserting screws will prevent the air conditioner
from being pushed into the room.
16. To replace the front.
)LUVWUHFRQQHFWWKHFRXSOHUSOXJVPDNHWKHH[KDXVW
control positioned through the front in the proper location.
Then replace the retaining screws that hold the panel in
place. 'RQRW push or pull the front panel louvers.
Fig. 10
Fig. 11
INSTALLATION INSTRUCTIONS (CONTINUED)

NOTE: $OORIWKHSLFWXUHVLQWKLVPDQXDODUHIRUH[SODQDWRU\SXUSRVHVRQO\7KHDFWXDOVKDSHORRNRIWKH
DLUFRQGLWLRQHUSXUFKDVHGPD\EHVOLJKWO\GLIIHUHQWEXWWKHRSHUDWLRQVDQGIXQFWLRQVDUHVLPLODU
Sound of Rushing Air
AWWKHIURQWRIWKHXQLWWKHVRXQGRI
rushing air being moved by the fan
may be heard.
Gurgle+Lss
“Gurgling” or “hissing” noise may
be heard due to refrigerant
passing through evaporator
during normal operation.
+Lgh Pitched Chatter
+Lgh efficiency compressors
may have a high pitched chatter
during the cooling cycle.
Vibration
UniWPD\YLEUDWHDQGPDNHQRLVH
because of poor wall or window
construction or incorrect installation.
7KLV'2(6127LQGLFDWHDGHIHFWLYH
unit.
Pinging or Switching
'URSOHWVRIZDWHUKLWWLQJFRQGHQVHU
during normal operation may cause
“pinging” or “switching” sounds.
7KRURXJKO\IDPLOLDUL]H\RXUVHOIZLWKWKHFRQWUROSDQHODVVKRZQEHORZDQGDOORILWVIXQFWLRQV$IWHUZDUGV
follow the symbol for the functions you desire BEFORE operating the unit. This unit can be controlled by
the unit control or with the remote control.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
13
NORMAL SOUNDS
AIR CONDITIONER FEATURES
UNIT CONTROL PANEL
Exhaust Selector Sets Mode
Temp./Timer
Adjustment
Energy Saver
Mode
Activates Timer Sleep Mode Activates Check
Filter
Sets Fan
Speed
Turns Unit
On/ Off
Remote Signal
Receptor
Close Open
Auto Low
Med +LJK
Auto
On Off
Cool
'U\ Fan
Exhaust
Fan Timer Mode Energy
Saver Sleep &KHFN
Filter
7(037,0(5
DISPLAYS
TEMPERATURE
OR TIME OR ERROR CODES
TO TURN UNIT ON OR OFF:
Press ON/OFF button to turn the
unit on or off.
TO CHANGE TEMPERATURE SETTING:
Press
temperature setting.
UP/DOWN button to change the
/
NOTE:Press orhold eitherUPor 'OWNbutton
until thedesired temperatureis seenon thedisplay.
This temperaturewill beautomatically maintained
OO OO
anywhere between2F Cand F &. If
you wantthe displayto readthe actualroom
temperaturesee “To Operate on FanOnly” section.
NOT
WKH(QHUJ\6DYHUIXQFWLRQXQGHU³&RRO´³'U\´
DQG³$XWR´RQO\$XWR&RROLQJDQG$XWR)DQ
modes
E: The unit will automatically initiate .

14
AIR CONDITIONER FEATURES (CONTINUED)
TO ADJUST THE FAN SPEED: TO SELECT THE OPERATING MODE:
SLEEP FEATURE:
Press Sleepbutton toinitiate thesleep mode.
Press ChecNFilter button to initiate this feature.
This featureis areminder toclean theAirFilter for
more efficientoperation. TheLE'OLJKtwill illumi
nate after hoursof operation.To resetafter
cleaning thefilterpress the“ChecNFilter” button
and the light will go off.
CHECK FILTER FEATURE:
ENERGY SAVER FEATURE:
FOLLOW ME FEATURE:
Light
flashing
Follow
Me
TIMER: AUTO START/STOP FEATURE:
Press to select one of four fan speeds: “AXWR”
“Low” “Med” or ³+LJK” Each time the button is
pressedthe fan speed mode is shifted. On ³'Uy”
mode the fan speed is set at low automatically.
In this mode the selected temperature will increase
FRROLQJor decrease XQLWs with heating onlyby
2OFOC minutes after the mode is selected.The
temperature will then increase FRROLQJ or decrease
XQLWs with heating onlyby another 2O)OC after
an additional minutes.This new temperature
will be maintained for hours before it returns to the
originally selected temperature. This ends the Sleep
mode and the unit will continue to operate as
originally programmed. The Sleep mode program
can be cancelled at any time during operation by
pressing the “Sleep” button again.
Press Energy Saver button to initiate this
function. This function is available on “Cool” ³'Uy”
and “Auto” RQOy AXWR&RROLQg and$XWR)DQ
modes. In this modethe fan will continue to run for
minutes after the compressor shuts off.The fan
then cycles on for 2 minutesat  minute intervals
until the room temperature is above the set
temperatureat which time the compressor turns
bacNon and cooling starts.
7RDFWLYDWHWKH)ROORZ0HIHDWXUHSRLQWWKHUHPRWH
control towards the unit and press the “Follow Me”
button. The remote displays the actual temperature at
its location. The remote control will send this signal to
WKHDLUFRQGLWLRQHUHYHU\PLQXWHV until the Follow Me
button is pressed again. If the unit does not receive the
)ROORZ0HVLJQDOGXULQJDQ\PLQXWHLQWHUYDO the unit
will beep to indicate the Follow Me mode has ended.
The actual temperature can be displayed at the unit by
pressing the “Fan” only mode. When in the “Cool”
PRGHWKHXQLWGLVSOD\LQGLFDWHVWKHVHWWHPSHUDWXUH.
This feature can ONLY be activated
from the remote control. The
remote control serves as a remote
thermostat allowing for precise
temperature control at its location.
To choose operating modepress the Mode button.
Each time you press the buttonDmode is selected in
a VHTXHQFe that goes from “Auto”“Cool” “'Uy” & “Fan.”
The indicator light will illuminate and remain on once
the mode is selected. The unit will automatically
initiate the Energy Saver function under “Cool,”
“Dry,” and “Auto” (only Auto-Cooling andAuto-
Fan) modes.
To operate on “Auto” feature:
To operate on “Fan” only:
Use this function only when cooling is not desired
such as for room air circulation or to exhaust stale
air. 5HPHPEHr to open the vent during this function
but NHHp it closed during cooling for maximum cooling
efficiency.You can choose any fan speed you prefer.
'XULQg this functionthe display will show the actual
room temperaturenot the set temperature as in the
cooling mode. Temperature cannot be adjusted in
“Fan” mode.
To operate on “Dry” mode:
In this modethe air conditioner will reduce air
humidity. If the space is a closed or sealed areasome
degree of cooling will continue.
:KHQ\RXVHWWKHDLUFRQGLWLRQHULQ$872PRGHLWZLOO
DXWRPDWLFDOO\VHOHFWFRROLQJKHDWLQJRQPRGHOVZLWK
KHDWLQJFDSDELOLWLHVRUIDQRQO\RSHUDWLRQGHSHQGLQJRQ
what temperature you have selected and the room
temperature.The air conditioner will control room
temperature automatically around the temperature you set.
In this mode, the fan speed cannot be adjusted.
It starts automatically at a speed according to the
room temperature.
:KHQWKHXQLWLVRQRURIIILUVWSUHVV7LPHUEXWWRQ
The TIMER ON indicator light illuminates. It indicates the
Auto Start program is initiated.
:KHQWKHWLPHRI7,0(521LVGLVSOD\HGLI\RXSUHVWKH
7LPHUEXWWRQDJDLQWKH7,0(52))LQGLFDWRUOLJKW
illuminates. It indicates the Auto Stop program is initiated.
3UHVVRUKROGWKH83RU'2:1EXWWRQWRFKDQJHWKH$XWR
WLPHE\KRXULQFUHPHQWVXSWRKRXUVWKHQE\
KRXULQFUHPHQWVXSWRKRXUV7KHFRQWUROZLOOFRXQW
down the time remaining until start.
7KHVHOHFWHGWLPHZLOOUHJLVWHULQVHFRQGVDQGWKH
V\VWHPZLOODXWRPDWLFDOO\UHYHUWEDFNWRGLVSOD\WKH
previous temperature setting or the room temperature
GHSHQGLQJRQZKHWKHUWKHXQLWLVSRZHUHGRQRURIIDQG
WKHPRGHLWLVLQ
Turning the unit ON or OFF at any time or adjusting the
WLPHUVHWWLQJWRZLOOFDQFHOWKH$XWR6WDUW6WRS
program.

15
AIR CONDITIONER FEATURES (CONTINUED)
Error Codes:
ASRoom temperature sensor error - Unplug the unit and
SOXJLWEDFNLQ,IHUURUUHSHDWVFDOOFXVWRPHUVHUYLFH
127(,IHUURURFFXUVLQ³)DQ´RQO\PRGHXQLWZLOO
GLVSOD\³/2´ORRVHFRQQHFWLRQRU³+,´VKRUWFLUFXLW
Evaporator temperature sensor error - Unplug the unit
DQGSOXJLWEDFNLQ,IHUURUUHSHDWVFDOOFXVWRPHUVHUYLFH
³´LVGLVSOD\HGDVVKRZQLQOHIWSLFWXUH
HSElectric heating sensor error -Unplug the unit and
plug LWEDFNLQ,IHUURUUHSHDWVFDOOFXVWRPHUVHUYLFH
6KRZVWKHVHWWHPSHUDWXUHLQ³&´RU³)´DQGWKH$XWR
WLPHUVHWWLQJV:KLOHRQ³)DQ´RQO\PRGHLWVKRZVWKH
room temperature.
ADDITIONAL THINGS YOU SHOULD KNOW
The controlis capableof displayingtemperature indegrees Fahrenheitor degreesCelsius.
To convertfrom oneto theotherpress andhold theUp and'RZQ THPS7LPHU buttonsat the
same timefor seconds.
The Coolcircuit hasan automaticminutetime delayed start ifthe unitis turnedoff andoQTXLFNO\
$IWHUXQLWLVWXUQHGRIIOHDYHXQLWRIIIRUDPLQLPXPRIPLQXWHVEHIRUHDWWHPSWLQJWRWXUQEDFNRQ7KLVSUHYHQWV
RYHUKHDWLQJRIWKHFRPSUHVVRUDQGSRVVLEOHFLUFXLWEUHDNHUWULSSLQJ7KHIDQZLOOFRQWLQXHWRrun during this time.
Air Directional Louvers HOW TO USE:
8VHWKHZD\GLUHFWLRQDOORXYHUVWRGLUHFWWKHDLUIORZ
8SRU'RZQDQG/HIWRU5LJKWWKURXJKRXWWKHURRP
as needed.
0RYHWKH&HQWHU+DQGOHVIURPVLGHWRVLGHXQWLOWKH
GHVLUHG/HIW5LJKWGLUHFWLRQLVREWDLQHG
$LU'LUHFWLRQZD\
'LVSODys
DISPLAYS
NOTE: ,IWKHXQLWEUHDNVRIIXQH[SHFWHGO\
GXHWRSRZHUEHLQJFXWLWZLOOUHVWDUWZLWKWKH
previous function setting automatically when
the power resumes.
Exhaust Control
This Exhaust Control allows the air conditioner to
HLWKHUFLUFXODWHLQVLGHDLU&ORVHGRUH[KDXVWDLUWR
WKHRXWVLGH2SHQ
The Closed position is used when maximum cooling
is desired. It may also be used for air recirculation
without cooling when the air conditioner is set in any
FAN position.
The Open position removes stale air from the room
and exhausts it to the outside. Fresh air is drawn in
through normal passages in the home.
Close Open
Auto Low
Med +LJK
Auto
On Off
Cool
'U\ Fan
Exhaust
Fan Timer Mode
7(037,0(5

16
CARE AND CLEANING
Air Filter Cleaning
The air filter should be cleaned DWOHDVWHYHU\WZRZHHNVRUDV
necessary. Trapped particles in the filter can build up and cause an
accumulation of frost on the cooling coils.
Grasp the filter by the center and pull up and out.
:DVKWKHILOWHUXVLQJOLTXLGGLVKZDVKLQJGHWHUJHQWDQGZDUPZDWHU
Rinse filter thoroughly.
*HQWO\VKDNHH[FHVVZDWHUIURPWKHILOWHU%HVXUHWKHILOWHULV
thoroughly dry before replacing.
$VDQDOWHUQDWLYHYDFXXPWKHILOWHUFOHDQ
NOTE:1HYHUXVHKRWZDWHURYHU)&WRFOHDQWKHDLUILOWHU
Never attempt to operate the unit without the air filter.
%HVXUHWRXQSOXJWKHDLUFRQGLWLRQHUWRSUHYHQWVKRFNRUILUH
KD]DUG7KHFDELQHWDQGIURQWPD\EHGXVWHGZLWKDQRLOIUHH
cloth or with a cloth dampened in a solution of warm water and
PLOGOLTXLGGLVKZDVKLQJGHWHUJHQW5LQVHWKRURXJKO\DQGZLSHGU\
1HYHUXVHKDUVKFOHDQHUVZD[RUSROLVKRQWKHFDELQHWIURQW
Be sure to wring excess water from the cloth before wiping the
controls. Excess water in or around the controls may cause
damage to the air conditioner.
Plug in air conditioner after unit has dried completely.
If air conditioner will be stored during the winter
remove it carefully from the window according to the
installation instructions. Cover it with plastic or return it
to the original carton.Always store unit in upright position.
Winter Storage
Cabinet Cleaning
!
CAUTION
N
&OHDQDLUFRQGLWLRQHURFFDVLRQDOO\WRNHHSLWORRNLQJDQGRSHUDWLQJOLNHQHZ%HVXUHWR
XQSOXJWKHXQLWEHIRUHFOHDQLQJWRSUHYHQWVKRFNRUILUHKD]DUGV

17
AIR
CONDITIONER NOT
COOLING ROOM, OR NOT
BLOWING COLD AIR
• Be sure unit is not too large or too small for the area of the room.
• Verify that all doors, windows, curtains and any other openings are closed off. Verify nothing is obstructing the
front grille of unit, such as curtains, etc.
• Allow enough time for room to cool, especially if outside temp is very high.
• Check that the filter is not dirty and louvers are open all the way and blowing in the direction desired.
• Check that unit is set to Cool Mode and that temperature is down enough (but not too low).
• If unit is near a heat source, such as a stove, etc., then relocate unit.
• If air coming from unit is cool to the touch, then unit is working properly; please double check the first three
bullet points above.
• If using Follow Me remote feature, move remote away from unit.
• Temperature sensor behind air filter touching cold coil. These two elements should not be touching.
Carefully straighten tube away from coil.
• Unplug unit for at least 5 minutes. Follow Reset instructions on plug.
AIR CONDITIONER
CYCLING ON AND OFF TOO
FREQUENTLY OR NOT ENOUGH
• Be sure unit is not too large or too small for the area of the room.
• Remove grille and make sure the temperature sensor is not too close to the coils. These two elements should
not be touching. Carefully straighten tube away from coil.
• Make sure nothing is blocking the grille or side vents.
• Make sure there is no dirt or debris inside the unit or on the filter.
AIR CONDITIONER COOLING BUT
ROOM IS TOO WARM - ICE
FORMING ON COOLING COIL
BEHIND DECORATIVE FRONT
• Outdoor temperature is below 64ºF (18ºC). To defrost the coil, set to Fan Only mode.
• Air filter may be dirty. Clean filter. Refer to Care and Cleaning section. To defrost, set to Fan Only mode.
• Thermostat is set too cold for night-time cooling. To defrost the coil, set to Fan Only mode. Then, set
temperature to a higher setting.
UNIT WILL NOT TURN ON
• Reset circuit breaker. Make sure there are not too many items (ie lamps, TV’s, etc.) working off the
same breaker.
• Check plug connection.
• If plug is operating on an on/off switch, be sure that the switch is ‘on’.
• Try plugging unit into another outlet.
• Unplug unit for at least 5 minutes. Follow Reset instructions on plug.
UNIT BLOWS FUSES OR POPS
CIRCUIT BREAKER
• Make sure there are enough available amps on the circuit for the air conditioner.
• Large units which run on a 230v will require a dedicated 20 or 30 amp circuit.
WATER DRIPPING OUTSIDE • Unit is removing a large quantity of moisture from a humid room. This is normal during excessively humid days.
WATER PUDDLES INSIDE UNIT
OR IS COMING INTO ROOM
• Adjust the slope of the unit so that it drains downward toward the exterior of the home.
(See Installation Instructions.)
• Make sure that there is no debris blocking the drainage area of the unit.
REMOTE SENSING / FOLLOW ME
DEACTIVATING PREMATURELY
• Remote control not located within range. Place remote control within 20 ft and 180º radius of the front
of the unit.
• Remote control signal obstructed. Remove obstruction.
Issue Possible Solutions
AIR CONDITIONER IS
MAKING NOISES
• Check to be sure the unit is free from debris such as leaves, sticks, etc. Verify nothing is obstructing the unit.
• Check the fan blade for cracks or chips.
• Make sure the unit is properly and securely mounted inside the window or wall.
• Clean the air filter.
TROUBLESHOOTING TIPS
Before calling for service, please review the chart below.
NOTE: A highly recommended troubleshoot for any issue in general consists of turning off unit and unplugging for 5 minutes.
It is also recommended to try another wall outlet.

Your Source for Home Comfort
Distributed by:
Perfect Aire, LLC
5151 Belt Line Rd.
Suite 878
Dallas, TX 75254
Specification and performance data is subject to change without notice.
Printed in PRC
877-365-6274
www.perfectaire.us