Perfect Flame GSC3318 User manual

WARNING
Improper installation, adjustment,
alteration, service or maintenance
can cause injury or property
damage.
Read the installation, operation
and maintenance instructions
thoroughly before installing or
servicing this equipment.
DANGER
Failure to follow these
instructions could result in fire
or explosion that could cause
property damage, personal
injury or death.
DANGER
DO NOT use gas grill for indoor
cooking or heating. TOXIC fumes
can accumulate and cause
asphyxiation. DO NOT use in or
on boats or recreational vehicles.
PROP 65 WARNING
Chemicals known to the state of
California to cause cancer, birth
defects or other reproductive
harm are created by the
combustion of liquid propane
gas
.
WARNING
FOR YOUR SAFETY:
For Outdoor Use Only.
(outside any enclosure)
SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. IF YOU ARE ASSEMBLING THIS UNIT
FOR SOMEONE ELSE, GIVE THIS MANUAL TO HIM
OR HER TO SAVE FOR FUTURE REFERENCE.
FOR CUSTOMER SERVICE,
EMAIL TO
[e-mail] OR
CALL 1-877-885-8227 (TOLL-FREE),
6 A.M. – 5 P.M.
(PST) ,MONDAY-FRIDAY.
Printed in China
GSC3318
Owner’s Manual
I
T
E
M
#
25586
4
-
Burner
LP Gas Grill

.
Grill Operation 1-2-3
Before Grilling,
Step 1 Keep your grill a safe distance away from your property.*
Step 2 Always Perform a Leak Test on all connections and hoses.*
Step 3 Keep children away from the grill.
During Grilling,
(To avoid tripping safety valves, please follow these instructions carefully!)
Step 1 First open lid and turn gas valve on slowly.
Step 2 Turn only one knob on at a time when lighting up the grill.
Step 3 Use protective gloves when grill gets hot.
After Grilling,
Step 1 Burn grill for 10-15 minutes to burn off food residues.
Step 2 Wait until the grill is completely cooled before closing lid.
Step 3 Clean up grease build-up and cover your grill.
* Please refer to the owner’s manual for details.
WARNING
FOR YOUR SAFETY
1. DO NOT store or use
gasoline or other flammable
vapors and liquids within 25
feet of this or any other
appliance.
2. When cooking with
oil/grease, do not allow the
oil/grease to exceed 350°F
(177°C).
3. Do not store or use extra
cooking oil in the vicinity of
this or any other appliance.
4. When using rotisserie
burner, DO NOT turn on
main burners.
WARNING
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flames.
3. Open lid.
4. If odor continues,
immediately call your gas
supplier or fire department.
Always read and understand the WARNINGS and INSTRUCTIONS that are contained in this manual
before attempting to use this gas barbecue grill, to prevent possible bodily injury or property damage.
Always keep this manual in or near the grill, for convenient future reference.
GSC3318
1
Owner’s Manual

Table of Contents
For Your Safety ..................................................................................................3
Illustrated Parts List ............................................................................................5
Hardware List .....................................................................................................6
Assembly Instructions .......................................................................................7
Operating Your Grill ..........................................................................................16
Propane tank Connection ...................................17
Checking for Leaks ............................................17
Lighting Your Grill ..............................................17
Excess flow safety valve reset procedure ……..19
Care and Maintenance ......................................20
Award-Winning Barbecue Recipes .................................................................21
Troubleshooting ................................................................................................22
Warranty Program ............................................................................................24
GSC3318
2
Owner’s Manual

For Your Safety
Dear Valued Customer,
Congratulations on your new barbecue grill purchase! You’ve made the right choice. In this manual, you will find assembly
instructions, suggestions for grilling and helpful hints, as well as guidelines for the safe operation, proper care and use of
your grill. Our expert staff strives to provide you with an easy to assemble product. Should you have any questions or
problems with this product, please call our customer service department at 1-877-885-8227
6:00 am - 5:00 pm (PST), Monday through Friday.
NOTE: The use and installation of this product must conform to local codes. In the absence of local codes, use the
National Fuel Gas Code, ANSI Z223.1/ NFPA54.
IMPORTANT NOTICE: READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY AND USE
Safety First!
Read and understand all warnings and precautions prior to operating your grill.
WARNING
1. This grill is for outside use only. It should not be used in a building, garage or any other enclosed area.
2. The use of alcohol, prescription or non-prescription drugs may impair an individual’s ability to properly assemble or safely
operate this appliance.
3. Always open the grill lid carefully and slowly as heat and steam trapped within the grill could cause severe burns.
4. Always place your grill on a hard and level surface far away from combustible materials and structures. An asphalt or blacktop
surface may not be acceptable for this purpose.
5. Do not leave a lit grill unattended.
6. Keep children and pets away from the grill at all times.
7. This is not a tabletop grill. Do not place this grill on any type of tabletop surface.
8. Do not use the grill in high winds.
9. This grill must be use with propane gas only.
10. Do not attempt to attach this grill to the self-contained propane system of a camper , trailer, motor home or house.
11. Do not use charcoal or lighter fluid.
12. Do not use gasoline, kerosene or alcohol for lighting. The LP-gas supply cylinder must be constructed and marked in
accordance with the specifications for propane gas cylinders of the U.S. Department of Transportation (DOT) CFR 49.
13. This outdoor gas appliance is not intended to be installed in or on recreation vehicles and / or boats.
14. Do not attempt to move the grill while it is lit.
15. Do not use the grill unless it is COMPLETELY assembled and all parts are securely fastened and tightened.
16. Keep combustible items and surfaces at least 24 inches away from the grill at all times. DO NOT use this gas grill or any gas
product under any overhead enclosure or near any unprotected combustible constructions.
17. Do not use in an explosive atmosphere. Keep grill area clear and free from combustible materials, gasoline and other
flammable vapors and liquids.
18. Do not attempt to use or assembly with missing or damaged parts. Contact customer service for a replacement.
CAUTION-Prevention of Burns
1. To avoid burns, do not touch metal parts of the grill until they have completely cooled for at least 45 minutes or
unless you are wearing protective gear such as pot holders, gloves, BBQ mittens, etc.
2. Do not alter the grill in any manner.
3. Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts or leaks, the hose must be
replaced prior to operation. The replacement hose assembly should be in accordance with the manufacturer’s
specifications.
4. Move gas hoses as far away as possible from hot surfaces and dripping hot grease.
GSC3318
3
Owner’s Manual

Safe Loca
t
ions
for
Use
of
This Outdoor Grill
DANGER
Never use this outdoor grill inside any building, garage, shed or breezeway, or inside any boat, trailer or recreational vehicle, to
prevent a possible fire and to prevent the possibility of carbon monoxide poisoning or asphyxiation.
WARNINGS
Do not use this appliance under overhead combustible surface or covered area (e.g., awnings, umbrellas, porches or
gazeboes).
Always confirm that this grill is not positioned under the overhang of a house, a garage or other structure before lighting it.
An overhang will serve to deflect flare-ups and radiated heat into the structure itself, which could result in a fire.
Always confirm that this grill is positioned more than 24 inches (61 cm)
a
w
a
y
from any combustible
materials or surface before lighting it, and
that
no
gasoline
or
other
volatile
substances
are
store
in
the
vicinity
of
this
grill.
(As the fig. shown on right).
The temperature of a grease fire or of the radiated heat might otherwise
be sufficient to ignite nearby combustible or volatile substances.
24Inc
h
es
24Inc
h
es
Always locate this grill where there will be ample combustion and
ventilation air,
but never position it in the direct path of a strong
w
i
nd.
Never allo
w
the grill to operate
w
hile unattended, to prevent uncontrolled grease fires from erupting.
Never attempt to move this
grill
w
hile it is
in operation or
w
hile it is still
hot, to prevent possible personal injury.
Never store or use gasoline or other flammable or volatile substances in the vicinity of this grill or in the vicinity of any other
heating-generating appliance, because of the danger of starting a fire.
Always confirm that the installation of this grill conforms wi
th the requirements of all local codes or, in the absence of
applicable local codes, with either the National Fuel Gas Code, ANSI Z223. NFPA 54 or CAN/CGA-B149.2, Pro
pane
Installation
Code.
D
A
NGER
–
Ga
s
Safety
Liquid propane (LP) gas is flammable and hazardous if handled improperly. Become aware of its characteristics before
using any propane product.
• Propane Characteristics: Flammable, explosive under pressure, heavier than air and settles in pools in low areas.
• In its natural state, propane has no odor. For your safety, an odorant has been added.
• Contact with propane could cause freeze burns to the skin.
• This grill is shipped from the factory for propane gas use only.
• Never use a propane cylinder with a damaged body, valve, collar or footing.
• Dented or rusted propane cylinders may be hazardous and should be checked by your propane gas supplier.
C
A
UTION
• It is essential to keep the grill’s valve compartment, burners and circulating air passages clean.
• Inspect the grill before each use:
Step 1 . Inspect all hoses and connections and make certain they are secure.
Step 2 Check and clean the burner venturi tubes for insects and insect nest by removing the burner and
inserting a bottle brush cleaner into each tube to make sure the passage is clear.
*** A clogged tube can lead to a fire beneath the grill.
Step 3 Ensure that the valve nozzle is pointing straight and completely inserted into the venture tube.
GENE
R
AL
I
N
FORM
A
TION
1. A propane gas cylinder is required for operation.
2
.
Th
i
s
ga
s
g
r
ill
i
s
NO
T
i
n
t
e
nd
e
d
f
o
r
c
o
m
me
r
c
i
a
l
u
s
e
.
GSC3318
O
w
n
e
r’
s
Manu
a
l
4

Illustrated Parts List
1. Body Assembly--------1pc 2. Bottle Holder----------1pc 3. Main Door------------2pcs 4. Right Side Shelf-------1pc
5. Right Storage----------1pc 6. Storage Door--------2pc s 7. Partition----------------1pc 8. Left Side Shelf---------1pc
9. Left Storage -------------1pc 10. Back Window--------1pc 11. Heat plate------- --------4pc s 12. Cooking Grid--------4pcs
13. Warming Rack-------2pcs 14. Tank Supporrt ------------1pc 15. Rotisserie Motor
Support -------------1pc
17. Grease Cup----------2pcs 18. Cup Support-------2pcs
GSC3318 5
Owner’s Manual
16. Tank Clip-------------1pc

Hardware List
M6x12mm Bolts
A 16pcs B
M6x16mm Bolts
10pcs
C
M4 x10 mm Bolts
2pcs
D
Spring Washers
10pcs
M6 Washers 26pcs
E
M6 Nuts
2pcs
F
G Side Burner Knob
1pc
H
Side Knob Seat
1pc
Screwdriver
1pc
I
Hardware listed above is not scaled to exact size
(A screwdriver is included for your convenience.)
GSC3318 6
Owner’s Manual

Assembly Instructions
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is
fully assembled, go back and check to make certain all the bolts are tight. Tighten again with the screwdriver provided if it is
necessary.
Estimated Assembly Time: It will take less than 40 minutes to assembly the grill.
Step 1
Note: Before beginning assembly, make
certain the wheels of the cart assembly are
locked.
Align the holes at the right side panel (1) with
the holes on the right side of the bottle holder
(2).
Screw a M6x12mm bolt (A) with a M6 washer
(E) into each pre-drilled hole.
Tighten by hand until secure.
Repeat the procedure for the left side panel (2).
Go back and tighten with the screwdriver
provided.
Step 2
Insert the pin on the bottom of the right door
(3-1) into the hole at the bottom of the cart
assembly.
Insert the pin on top of the right door in the cart
front beam.
Repeat the same procedure for the left door
(3-2).
GSC3318
7
Owner’s Manual

Step 3
Align the holes on the left storage (9) with the
holes on the tank support (14).
Screw a M6x12mm bolt (A) with a M6 washer
(E) into each pre-drilled hole.
Tighten by hand until secure.
Go back and tighten with the
screwdriver provided.
Step 4
Align the holes at the right storage (5) with
the holes on the right sight shelf (4).
Screw a M6x12mm bolt (A) with a M6
washer (E) into each pre-drilled hole.
Tighten by hand until secure.
Repeat the same procedure for the left
storage assembly with left side shelf (8).
Tighten by hand until secure.
Go back and tighten with the
screwdriver provided.
GSC3318
8
Owner’s Manual

Step 5
Align the holes on the bottom of left side
storage assembly with the holes on the
bottom of the left side panel.
Screw a M6x16mm bolt (B) with a spring
washer (D) and M6 washer (E) into each
pre-drilled hole.
Tighten by hand until secure.
Step 6
Align the holes on the top of the left
side storage assembly with the holes
on the top of the left side panel. Screw
a M6x16mm bolt (B) with a spring
washer (D) and M6 washer (E) into
the pre-drilled hole.
Tighten by hand until secure.
GSC3318
9
Owner’s Manual

Step 7
Align the holes on the left back side of body
assembly with the holes on the back of the left side
storage assembly.
Screw a M6x16mm bolt (B) with a spring washer
(D) and M6 washer (E) into the pre-drilled hole.
Tighten by hand until secure.
Go back and tighten the bolts (included from step 5
& 6) with the screwdriver provided.
.
Step 8
Align the holes on the bottom the
right side storage assembly with the
holes on the bottom of the right side
panel.
Screw a M6x16mm bolt (B) with a
spring washer (D) and M6 washer (E)
into each pre-drilled hole.
Tighten by hand until secure.
GSC3318
10
Owner’s Manual

Step 9
Align the holes on the top of the
right side storage assembly with the
holes on the top of the right side
panel.
Screw a M6x16mm bolt (B) with a
spring washer (D) and M6 washer
(E) into the pre-drilled hole.
Tighten by hand until secure.
Step 10
Align the holes on the right back side of body
assembly with the holes on the back of the
right side storage assembly.
Screw a M6x16mm bolt (B) with a spring
washer (D) and M6 washer (E) into the
pre-drilled hole.
Tighten by hand until secure.
Go back and tighten the bolts (include from
step 8 & 9) with the screwdriver provided.
GSC3318
11
Owner’s Manual

Step 11
Connect the ignition wire to electrode then
align the venturi tube with the valve. Make
certain all parts are properly connected.
Step 12
Align the holes on the bottom of left side knob
seat
(H) with the holes on the side shelf and
side burner valve.
Screw a M4x10mm bolt (C) into each
pre-drilled hole.
Tighten the bolts with the screwdriver
provided. Insert the side burner knob (G) into
knob shaft on valve.
GSC3318
12
Owner’s Manual

Step 13
Insert the pin on the bottom of the
right storage door (6-1) into the hole
on the bottom of the right side
storage assembly.
Insert the pin on top of the right
storage door on the right side
storage front beam.
Repeat the same procedure for the
left side storage door (6-2) on left
side storage assembly.
Step 14
Slide the grease pan (18) into the back of the
cart
assembly.
Hook two cup supports (18) into the grooves
beneath the grease pan.
Place two grease cups (17) on the cup
supports .
GSC3318
13
Owner’s Manual

Step 15
Place the four heat plates (11) inside grill
body upon the burners.
Place the four cooking grids (12) in grill body
upon the heat shields.
Insert the four feet of the two warming racks
into the holes on the top of the grill body.
Step 16
Align the holes of the rotisserie motor
support (15) with the pre-drilled holes on
the right side of the grill body.
Insert a M6x16mm bolts (B) through each
hole.
Attach a M6 washer (E), a spring washer
(D) and a M6 nut (F) to the ends each bolt.
Tighten by the screw driver provided.
.
GSC3318
14
Owner’s Manual

Step 17
Place the partition (7) on the middle of
inside the right side storage assembly.
Step 18
Insert the tank clip (18) into the holes on tank
support. Place the gas tank on tank seat.
Clip the gas tank by the tank clip.
Screw the regulator into tank valve.
Make certain the regulator is connected securely.
GSC3318
15
Owner’s Manual

Fully Assembled View
Operating the Grill
CAUTION:
Use only the regulator provided. If a replacement is necessary, call our customer service center. The use of
unauthorized parts can create an unsafe condition and environment.
The propane gas supply cylinder used must be constructed and marked in accordance with the Specifications for Propane
Gas Cylinders of the U.S. Department of Transportation (DOT). Only cylinders with a listed overfill prevention device
(OPD) and marked “propane” may be used. Cylinders with an OPD will have valve handles with three “lobes” (prongs).
The pressure regulator and hose assembly supplied with the outdoor cooking gas appliance must be used. Replacement
pressure regulators and hose assembly must be those specified by the outdoor cooking gas appliance manufacturer. Only
use 20 pound cylinders equipped with a cylinder connection device compatible with the connection for outdoor cooking
appliances. The cylinder must include a collar to protect the cylinder valve. The gas cylinder should not be dropped or
handled roughly. If the appliance is not in use, the gas cylinder must be disconnected.
Storage of the appliance indoors is permissible ONLY if the cylinder is disconnected and removed from the appliance.
Cylinders must be stored outdoors and out of the reach of children. Cylinder must not be stored in a building, garage or
other enclosed area. Your cylinder must never be stored where temperatures can reach over 125F.
Before connecting, make sure there is no debris caught in the head of the gas cylinder, regulator valve or in the head of the
burner and burner ports. Connect regulator valve and hand tighten firmly. Disconnect the propane cylinder from the
regulator valve when the grill is not in use. DO NOT obstruct the flow of combustion air or ventilation air to the grill. The
propane cylinder must be arranged for vapor withdrawal and equipped with a listed overfill prevention device (OPD).
Danger: A fire causing death or serious injury may occur if the following is no followed exactly:
Never store or use gasoline or other volatile substance in the vicinity of this grill.
Never store a spare propane cylinder in the vicinity of this grill, or in the vicinity of another potential heat source.
Never fill the propane cylinder beyond 80% full.
Warning: No Spare Gas Store
GSC3318 16
Owner’s Manual

LP (Propane) Gas Supply Connection
1. Always place the propane cylinder on the tank brackets located on the right side of the cart.
2. Always confirm that all burner control knobs are in the OFF position before activating the gas supply.
3. Before connection, be sure that there is no debris caught in the head of the gas cylinder, head of the regulator valve, or in
the head of the burner and burner ports.
4. Always connect the gas supply regulators as follows:
Insert the nipple of the valve coupling into the tank valve and tighten the connection
collar by turning it clockwise with one hand while holding the regulator with the other.
(As the fig. shown on right)
5. Disconnect the propane cylinder from the regulator valve when the grill is not in use.
6. Do not obstruct the flow of combustion air and ventilation air to the grill.
DANGER
To prevent fire or explosion hazard when testing for a leak:
1. Always perform the “leak test “before lighting the grill and each time the cylinder is
connected for use.
2. Do not smoke or allow other sources of ignition in the area while conducting a leak test.
3. Conduct the leak test outdoors in a well-ventilated area.
4. Do not use matches, lighters or a flame to check for leaks.
5. Do not use grill until all leaks have been sopped, if you are unable to stop a leak, disconnect the propane supply, and call for
gas appliance service or your local propane gas supplier.
Checking for Leaks
1. Make a 2-3 oz. of leak solution by mixing one part liquid dishwashing soap with three parts water.
2. Make sure control knobs are in the “OFF” position.
3. Spray some solution on the tank valve up to the regulator connection.
(As the fig. shown on right).
4. Inspect the solution at the connections, looking for bubbles. If no bubbles appear,
the connection is secure. .
5. If bubbles appear, you have a leak. Go to step 6.
6. Disconnect the regulator from the tank and reconnect, make sure the connection is secure.
7. Retest with solution.
8. If you continue to see bubbles, replace the cylinder.
Lighting Your Grill
Danger: Failure to open lid while igniting the barbecue’s burners or not waiting 5 minutes to allow gas to clear if the barbecue does
not light ,may result in an explosion, which could cause serious bodily injury or death.
WARNING : Never stand with your head directly over the grill when preparing to light the main burners, to prevent possible bodily
injury.
Main Burner
1. Open lid while lighting burners.
WARNING : Attempting to light the burner with the lid closed may cause an explosion. Make sure there are no obstructions of
airflow to the gas unit. Spiders and insects can nest and clog the burner/venturi tube at the orifice. A clogged burner tube can
lead to a fire beneath the appliance.
2. All valves must be in the “OFF” position.
3. Open cylinder valve.
4. Ignite only the burners you wish to use, using the same method for each:
Push desired burner valve knob and rotate slowly about 1/4 counter-clockwise until a click is heard. The burner should
light. If the burner does not light, return the valve knob to the “OFF” position immediately. Wait five minutes for the gas to
clear and repeat the procedure. After burner is lit, repeat the procedure with any other burner desired.
5. Adjust valve knob(s) to desired cooking temperature.
GSC3318 17
Owner’s Manual

Using the Lighting Stick to Light the Main Burners
1. Remove the cooking grid from the burner you wish to light.
2. Insert a match into theend of lighting stick. Light the match.
3. Once lit, place the flame through the hole on grill body to reach the burner ports.
(As the fig. shown on right side).
4. Press the valve knob and rotate it counter clockwise to the ‘’HIGH’’ position. The
burner should light immediately. To light up other burners, repeat the same
procedure for the adjacent burner and continue in sequence until all desired
burners are lit.
5. Replace cooking grid and adjust burners to the desired cooking temperature.
Precautions
1. After lighting, please observe the burner flame. Make sure all burner ports are lit.
2. If the burner flame goes out during operation, immediately turn the gas “OFF”. Open lid to let the gas clear for at least
5 minutes before re-lighting.
3. Before cooking on the grill for the first time, operate the grill for approximately 15 minutes with the lid closed and the gas
turned on “HIGH”. This will “heat clean” the internal parts, dissipate odor from the manufacturing process and painted finish.
4. Clean the grill after each use. DO NOT use abrasive or flammable cleaners. This may damage parts of the grill and cause a
fire.
Side Burner
1. Open lid while lighting the burner. Lid must remain open while burner is lit.
2. Valve must be in the “OFF” position.
3. Open cylinder valve.
4 . Push side burner knob fully and rotate it slowly about 1/4 counter-clockwise until a click is heard. The burner should light. If the
burner does not light, turn the knob to the “OFF” position immediately. Wait five minutes for the gas to clear and repeat the
procedure.
5. Adjust valve knob to the desired cooking temperature
2 in.
1 in.
0 in.
Observe flame height when lit:
Flame should be a blue/yellow color between 1 to 2 inches high.
Confirm that the burner is properly lit and that the flame pattern is as desired, (see fig. A, B and C below for the proper flame patterns).If
the flame pattern is other than normal, consult the troubleshooting guide on page 20 for corrective action.
FIG. A FIG. B FIG. C
Normal: Soft blue flames with yellow tips
between I inch - 2 inches high.
Out of adjustment: Noisy hard blue
flames – too much air.
Poor combustion: Wavy, yellow
flames- too little air.
GSC3318 18
Owner’s Manual

Flare-ups
“Flare-ups” sometimes occur when food drippings fall onto the hot heat distribution plate or burners and ignite. Some
flaring is normal and desirable, as it helps impart the unique flavors associated with grilled foods. Controlling the
intensity of the flare-ups is necessary, however, in order to avoid burned or unevenly cooked foods and to prevent
the possibility of accidental fire.
WARNING: Always monitor the grill closely when cooking and turn the flame level down (LOW) of OFF, if flare-
ups intensify
Shutting Off Burners
• Always turn the valve knob(s) clockwise to the ‘’HIGH’’ position, then press and turn it to ‘’OFF’’. Never force the
knob without pressing it. This could damage the valve.
• Promptly turn the gas supply to the “OFF” position at the propane cylinder.
• Close the lid of the grill.
Excess flow safety valve reset procedure
• The new regulators are equipped with a safety device that restricts the gas flow in the event of a gas leak.
However, unsafe practices of grill operation could activate the safety device without having a gas leak.
• A sudden shut off of the gas flow typically occurs if you open the LP tank valve rapidly, or if one or more of the burner
control knobs is in an open position when opening the LP tank valve.
• This procedure is effective with all LP Tank sizes as well as Natural Gas. When performing the procedure on a
Natural Gas model, simply substitute "Natural Gas valve" for "LP Tank".
• To ensure the procedure is safely and is successfully performed, please carefully follow the instructions
below.
1. Close the LP tank valve.
2. Turn all burner control knobs to the OFF position.
3. Disconnect the regulator from the LP tank.
4. Open the lid of the grill.
5. Turn burner control knobs to HIGH.
6. Wait at least 1 minute.
7. Turn burner control knobs OFF.
8. Wait for at least 5 minutes .
9. Re-connect the regulator to the LP tank.
10. SLOWLY turn the LP tank valve at ¼ turn at a time and have the valve all the way open.
11. With the lid open , For BBQ with ignition button : ONLY turn on ONE front burner control knob to the
HIGH position. Ignite the grill by pushing the ignition button. For BBQ with an automatic ignition : Push
down the control knob you want to light, turn counter clock wise until you hear the ignition click.
12. After the first front burner is lit, turn on the other control knob(s) to the HIGH position. **If you have more than
two burners,
ONLY turn them on ONE AT A TIME.
13. When all front burners are lit, close the BBQ lid
14. Wait for 10-15 minutes, the temperature should reach 400 – 450 F°
GSC3318 19
Owner’s Manual