Performance Health 4850 User manual

4850 Split Top Over bed Table
Operating Instructions
Tools required
Phillips Head Screw Driver
Operating Instructions
ote: Do not remove shipping screws until steps 1-4 are complete
1Remove table from box with tops on the
bottom tray.
2Insert the casters, tie wrapped to base, into
the holes in the bottom of the base.
3Remove tape from drop lock paddle and
table top. (Fig. 3)
4tand Table upright on the Casters.
5Remove cardboard inserts from between
tabletops. (Fig. 2)
6Remove shipping screw. (Fig. 2)
7To raise and lower the top, lift the Trip
Handle upward and push down on the top to
desired height.
8To slide out the Lower Top, lift upward on
the Top Lock Release tabs. lide upper top
back and forth several times as far as it will
go. This is necessary after shipping to assure
smooth operation.
STEP 5 & 6: REMOVE FOR OPERATIO STEP 3: REMOVE TAPE
Trip Handle
Top Lock
Release
Tops
Fig. 1
Fig. 2
Fig. 3

4850 Split Top Over bed Table
Operating Instructions