Performance Tool W50063 User manual

OWNER’S MANUAL
Item Number W50063
WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operation of this product. The
owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and
while in use, maintaining the unit in good working order. If the owner and/or operator are not fluent in English,
the product warnings and instructions shall be read and discussed with the operators’ native language by the
purchaser/owner or his designee. Make sure that the operator comprehends its contents. Safety information
shall be emphasized and understood prior to usage. The product shall be inspected per the operating
instructions.
Users of this product must fully understand these instructions. Each person operating this product must also
be of sound mind and body and must not be under the influence of any substance that might impair their
vision, dexterity or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.
600W SHOP BLOWER

SAFETY GUIDELINES / DEFINITIONS
UNPACKING AND INSPECTION
SPECIFICATIONS
IMPORTANT SAFETY INFORMATION
WARNING. READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE
OPERATING THIS PRODUCT. FAILURE TO DO SO MAY RESULT IN FIRE, ELECTRICAL SHOCK, PERSONAL
INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
1. Always use common sense and pay particular attention to all
the DANGER, WARNING, CAUTION and NOTICE statements
of this manual. The safety instructions provided are not in-
tended to cover all possible conditions and practices that may
occur when operating, maintaining and cleaning power tools.
2. Observe work area conditions. Do not use machines or power
tools in damp or wet locations. Don’t expose to rain or snow.
Keep work area well lighted. Do not use electrically powered
tools in the presence of ammable gases or liquids. Do not
bring combustible materials near the tools. Power tools create
sparks, which may ignite the dust or fumes. Do not immerse
tool in liquids. Keep work area clean, well ventilated and well
lit. Cluttered work areas invite accidents.
3. Use personal protective equipment. Wear ANSI approved
safety goggles. Protective equipment such as dusk mask, non-
skid safety shoes, hard hat, heavy duty work gloves or hearing
protection used for appropriate conditions will reduce personal
injuries.
4. Keep bystanders, children and visitors away while operating
this product. Distractions can cause you to lose control.
5. Stay alert. Watch what you are doing, and use common sense
when operating this tool. Do not use this product while tired or
under the inuence of drugs, alcohol, or medication. A moment
of inattention while operating this product may result in serious
personal injury. Keep proper footing and balance at all times.
Do not reach over or across running machines, hoses, cords,
etc.
6. Dress properly. Do not wear loose clothing or jewelry. Keep
your hair, clothing and gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in moving parts.
7. Work Safe. Operate tool a safe distance from yourself and
others in the work area. Keep proper footing and balance at
all times. Do not overreach, especially on ladders. Be certain
ladders being used are sturdy, stable, on a rm surface and
erected as safe working angles. Do not reach over or across
running machines, hoses, cords, etc.
8. Inspect tool before every use; do not use if parts are loose or
damaged.
WARNING: Read and understand this entire instruction manual before attempting to assemble, install, operate or
maintain this product. Failure to comply with the instructions may result in serious personal injury and/or property
damage!
The following signal words are used to emphasize safety warnings that must be followed when using this
product:
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps
described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information
available at the time of publication. The manufacturer reserves the right to make product changes at any time without notice.
DANGER Indicates an imminently hazardous situation that, if
not avoided, WILL result in death or serious injury.
WARNING Indicates a potentially hazardous situation that, if
not avoided, COULD result in death or serious injury.
CAUTION Indicates a potentially hazardous situation that, if
not avoided, MAY result in minor or moderate injury.
NOTICE Indicates important information, which if not followed,
MAY cause damage to equipment.
After opening the carton, unpack your new product and related parts & accessories. Please inspect it carefully for
any damage that may have occurred during transit. Please check it against the photograph on carton. If any parts
are missing, please call customer service at 1-800-426-1262 between 6 a.m. and 5 p.m. Pacific time.
WARNING DO NOT operate this product if damaged during shipment, handling or misuse. Do not operate the product until the parts
have been replaced or the fault rectified. Failure to do so may result in serious personal injury or property damage. All damaged parts
must be repaired or replaced as needed prior to operating this product. Check to see that all nuts, bolts and fittings are secure before
putting this product into service. If you have any questions, or require assistance with damaged or missing parts, please contact our
factory customer service department at: 1-800-426-1262.
Please have the serial number, model number, and date of purchase available for reference when calling.
Specifications are
subject to change
without notice.
Voltage ............................................................ 120 V AC, 60Hz
Rated Power...................................................... 600W, 5 AMPs
RPM ........................................................................16,000 min.
Air Flow Rate ................................................................75 CFM
Bag Capacity .................................................................. 20 oz.
Weight ........................................................................... 3.3 lbs.
Noise Rating ...............................................................98 db(A)
2

IMPORTANT SAFETY INFORMATION
9. Do not alter this product in any way.
10. Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
11. People with pacemakers should consult their physician(s)
before use. Electromagnetic elds in close proximity to heart
pacemaker could cause pacemaker interference or pace-
maker failure. In addition, people with pacemakers should:
• Avoid operating alone.
• Properly maintain and inspect to avoid electrical shock.
• Any power cord must be properly grounded. Ground Fault
Circuit Interrupter (GFCI) should also be implemented – it
prevents sustained electrical shock.
12. Avoid body contact with earthed or grounded surfaces such
as pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is earthed or
grounded.
13. Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
14. Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Position the cord clear
of the spinning accessory. If you lose control, the cord may
be cut or snagged and your hand or arm may be pulled
into the spinning accessory. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
15. When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
16. If operating a power tool in a damp location is unavoidable,
use a ground fault circuit interrupter (GFCI) protected supply.
Use of a GFCI reduces the risk of electric shock.
17. Use power tool ONLY on adequately rated circuits to avoid
overheating of electrical systems.
18. Prevent accidental starting. Ensure switch is in the “OFF”
position before connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying power tools
with your nger on the switch or energizing power tools that
have the switch “ON” invites accidents.
19. Do not use the power tool if the switch does not turn it on and
off. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
20. Have your power tool serviced by a qualied repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained. Follow instructions
in the Maintenance section of this manual. Use of unauthor-
ized parts or failure to follow Maintenance Instructions may
create a risk of shock or injury.
21. Maintain labels and nameplates on the tool. These carry im-
portant safety information. If unreadable or missing, contact
Performance Tool® for a replacement.
22. Disconnect the plug from the power source before making
any adjustments or changing accessories. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
23. Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other condition
that may affect the power tool’s operation. Regularly clean
the power tool’s air vents. The motor’s fan will draw the dust
inside the housing and excessive accumulation of powdered
metal may cause electrical hazards. If damaged, have the
power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
24. Do not use accessories which are not specically designed
and recommended by the tool manufacturer. Just because
the accessory can be attached to your power tool, it does not
assure safe operation.
25. The rated speed of the accessory must be at least equal to
the maximum speed marked on the power tool. Accessories
running faster than their RATED SPEED can break and y
apart.
26. Use the power tool, accessories and tool bits etc. in accor-
dance with these instructions, taking into account the working
conditions and the work to be performed. Use of the power
tool for operations different from those intended could result
in a hazardous situation.
27. Keep cutting accessories sharp and clean. Properly main-
tained cutting accessories with sharp cutting edges are less
likely to bind and are easier to control.
28. Store idle equipment. When not in use, tools must be stored
in a dry location to inhibit rust. Always lock up tools and keep
out of reach of children and other untrained persons. Switch
off all unused electrical tools when stored. Disconnect battery
from unit. Tools are dangerous in the hands of untrained
users.
29. WARNING: Some dust created by power sanding, sawing,
grinding, drilling, and other construction activities, contains
chemicals known [to the State of California] to cause cancer,
birth defects or other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement or other masonry
products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks
that are specially designed to lter out microscopic particles.
(California Health & Safety Code § 25249.5, et seq.)
30. VIBRATION WARNING: This tool vibrates during use.
Repeated or long-term exposure to vibration may cause tem-
porary or permanent physical injury, particularly to the hands,
arms and shoulders. To reduce the risk of vibration-related
injury:
1. Anyone using vibrating tools regularly or for an extended
period should rst be examined by a doctor and then have
regular medical check-ups to ensure medical problems are
not being caused or worsened from use. Pregnant women
or people who have impaired blood circulation to the hand,
past hand injuries, nervous system disorders, diabetes, or
Raynaud’s Disease should not use this tool. If you feel any
medical or physical symptoms related to vibration (such as
tingling, numbness, and white or blue ngers), seek medical
advice as soon as possible.
2. Do not smoke during use. Nicotine reduces the blood
supply to the hands and ngers, increasing the risk of
vibration-related injury.
3. Wear suitable gloves to reduce the vibration effects on the
user.
4. Use tools with the lowest vibration when there is a choice
between different processes.
5. Include vibration-free periods each day of work.
6. Grip tool as lightly as possible (while still keeping safe
control of it). Let the tool do the work.
7. To reduce vibration, maintain the tool as explained in
this manual. If any abnormal vibration occurs, stop use
immediately.
31. The warnings, precautions, and instructions discussed in
this instruction manual cannot cover all possible conditions
and situations that may occur. It must be understood by the
operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the
operator.
WARNING: This product and its packaging contain a chemical
known to the State of California to cause cancer, birth defects, or
other reproductive harm. 3

PARTS LISTING
4
No. Part Name Qty.
1 Screw ST3.9X16 4
2 Net cover 1
3 Left fan housing 1
4 Nut M6 1
5 Fan washer 1
6 Fan 1
7 Screw ST5X35 6
8 Right fan housing 1
9 Ball bearing 608 2
10 Stator 1
11 Connection spring 2
12 Armature 1
13 Handle cover 1
No. Part Name Qty.
14 Switch 1
15 Brass terminal 2
16 Screw ST3.9X14 4
17 Brush cover 2
18 Carbon brush 2
19 Brush holder 2
20 Motor housing 1
21 Cord clip 1
22 Screw ST3.9X12 2
23 Nozzle 1
24 Wind pipe ring 1
25 Cord sleeve 1
26 Dust bag assembly 1

CONTROLS, COMPONENTS & ACCESSORIES
71
23
4
5
6
SPECIFIC SAFETY INSTRUCTIONS
This electric blower is a dual function device designed for blowing and sucking in the
around the garage, shop or home. It can be used to remove small debris, dust, shavings,
leaves, or blow dry water on a smooth surface. Not recommended for rough, porous or
uneven surfaces. This device is not designed for industrial applications. The device
cannot be used for other purposes than its intended use.
• Always wear sturdy shoes and sufficient clothing during operation. Do not wear loose
clothing that can be sucked into the suction tube.
• Keep long hair away from air intakes.
• Always use personal protective equipment, such as safety glasses and
hearing protection.
• Check thoroughly the area you are going to work on and remove all items that can be
sucked into the suction tube or blown away by the air blower.
• Do not begin working without air tubes, safety devices and covers installed in place.
• Hold the tool with both hands so the end of the pipe is not obstructed by the ground.
• Attach the extension cord to prevent its accidental disconnection.
• The tool should be repaired by authorized personnel only.
• Use only original spare parts recommended by the manufacturer.
5
1. Blowing connector
2. Switch
3. Switch lock button
4. Suction connector
5. Nozzle
6. Collection bag
7. Carbon brush plug
8. Nozzle retaining ring
FRONT BACK
8

GENERAL OPERATION
WARNING Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the begin-
ning of this manual including all text under subheadings therein before set up or use of
this product.
1. Switching on – press the switch
button (2) and hold it down.
2. Switching off – release the switch
button (2).
3. Switch lock (continuous operation).
a. Switching on: Press the button
switch (2), and then press the
switch lock button (3).
b. Switching off: Press and release the
switch button (2).
4. For use as a blower:
a. attach the nozzle (5) to the nozzle
retaining ring (8).
b. attach this assembly to the blowing
connector (1).
c. rotate clockwise to lock it in place.
5. For use as a vacuum:
a. attach the nozzle (5) to the suction
connector (4).
b. Attach the dust bag (6) to the
blowing connector (1).
c. After each use the dust bag must
be emptied. Unzip the bag and
empty its contents. If the bag
lling level is high, it will reduce the
suction power.
CARE & MAINTENANCE
1. Unplug the power cord from mains socket before any installation, adjustment,
repair, cleaning or maintenance.
2. Replacement of carbon brushes. Used (shorter than 5mm), burnt or broken
motor carbon brushes should be immediately replaced. Both carbon brushes
should always be replaced at the same time.
• Turn off the carbon brush plugs (7).
• Take out used carbon brushes and remove any carbon dust
using compressed air.
• Insert new carbon brushes. Carbon brushes should slide smoothly
into brush holders.
• Fasten the carbon brush plugs (7).
When the carbon brushes are removed, the device should be switched on for
approximately 1-2 minutes, so that carbon brushes can adapt to the motor.
Carbon brushes should be replaced only by a qualified person using original
spare parts.
6

CLEANING
• It is recommended that you clean the
device after each use.
• If possible, the motor housing should be
always kept free from dust and debris.
• Wipe the device with a clean cloth or blow
it with low pressure compressed air.
• Do not use water or chemical cleaning
agents for cleaning.
• Be careful to prevent water from
penetrating the device.
• When cleaning is completed, remove the
dust bag, shake it and clean thoroughly
to prevent mold and odors.
• If very dirty, empty the dust bag, wash it in
warm soapy water and dry thoroughly.
If the zipper is difficult to open, lubricate
its teeth with soap.
MAINTENANCE AND STORAGE
• Make sure the screws are properly tightened to be able to work safely. Use only original
accessories and original spare parts.
• If the device is not used, it should be stored in a dry place, away from children.
• In case of excessive sparking at the motor, have the condition of motor brushes
checked by skilled personnel.
• If the power cord is damaged, replace it with another one which has the same
characteristics. Entrust this operation to a qualified technician or a repair shop.
• All defects should be repaired by service workshop authorized by the manufacturer.
ENVIRONMENT PROTECTION
• Do not dispose of electrically powered products with household wastes.
They should be utilized in proper plants.
• Obtain information on wastes utilization from your seller or local authorities.
• Used up electric and electronic equipment contains substances active
in natural environment.
• Unrecycled equipment constitutes a potential risk for environment and human health.
7

1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give specific legal
rights. Except where prohibited by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of
warranties and remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use and service. A
defective product may be returned for a free replacement within 90 days from the date of purchase, provided that product is returned to
place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL®
will replace at no charge any parts which our examination shall disclose to be defective and under warranty. These warranties shall be valid
only when a sales receipt showing the date of purchase accompanies the defective product or defective part(s) being returned. For part(s)
after 90 days, please remit your request, postage prepaid to:
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be replaced under normal
use and service. These warranties shall not apply to any product or part which is used for a purpose for which it is not designed, or which
has been repaired or altered in any way so as to affect adversely its performance or reliability, nor shall these warranties apply to any
product or part which has been subject to misuse, neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its
products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied
warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability
and no implied warranty of fitness for any particular purpose, except that for goods purchased primarily for personal, family or household
use and not for commercial or business use, PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise
applicable, an implied warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the
duration, expressly warranted above. The laws on limitation of implied warranties may differ from state to state, so the above limitations
may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any
product, or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective product or part shall be the
repair, or replacement thereof as provided above. The laws on limitation of remedies or on consequential, incidental or special damages
may vary from state to state, so the above limitations may not apply in all cases.
© Copyright 2013 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138