Peter Pepper NIK Desk User manual

Please read these instructions carefully before installation..
Model: NIK60BLBL-1
NIK60BLWA-1 / NIK60BWMA-1
NIK60BWW-1 / NIK60BWWA-1
1
NIK Desk Installation Instructions

2
Parts List :
B.leg (left)
1PC
A.desk top
1PC
C.leg (right)
1PC
D.connecting bar
1PC
E.glass
1PC
F.cable tray
1PC
G.cable channel
1PC
.glass tray(left)
1PC
J.glass tray(right)
1PC
K.Velcro ties
2PCS
Installation Instructions
H.desk top tray
2PCS
Thanks for choosing the Nik Desk, please read these instructions carefully before assembling
this item. Our customer service can quickly assist you with installation questions and missing
or defective parts. We will not be liable for damage or injury caused by incorrect mounting,
assembly, or use.

3
D
C
B
b
d
A
b
Assembly Hardware：
a-M6 thumb bolts
3pcs
b-M6*12 hex socket
bolts 11pcs
c-M4*8 Philips head
bolts 2pcs
d-5mm Allen Key
1pc
Figure 1
Step 3: Attach the desk top (A) to left leg (B) and right leg (C). (Figure 2)
Figure 2
e-4mm Allen Key
1pc
Step 2: Attach the connecting bar (D) to left leg (B) and right leg (C). (Figure 1)
Installation Instructions:
Step 1: Read all instructions before assembly.

4
K
Figure 3
Step 4: Attach the cable tray (F) under desk top with bolts (c). (Figure 3)
Step 5: Attach each side of the cable tray on the connecting bar (D) with Velcro ties (K).
(Figure4)

5
a
E
G
b
Figure 5
Figure 6
Step 6: Insert the glass (E) into desk top and lightly tighten with M6 thumb bolts (a).
Do not over tighten. (Figure 5)
Step 7: Attach the cable channel (G) on the back side of left or right leg (hook to the
bottom of leg) and fasten using bolt (b). (Figure 6)

6
J
H
Figure 7
Step 9: Complete. (Figure 8)
Top capacity: 132 lbs
Step 8: Place the glass trays (I & J) and desk top trays (H) in place. (Figure 7)
Figure 8