Petting More MRC-600 User manual

MEDIUM RODENTS CAGE
SETUP GUIDE
安裝指南
SONG LIANG INCORPORATED COMPANY
MADE IN TAIWAN
淞亮股份有限公司｜台灣製造
CONTAINS
內容物
BASIC ASSEMBLY
ADVANCED ASSEMBLY
基本組裝
進階組裝
Please read this manual before you start
using this product.
This product contains small accessories,
please keep away from children & pets.
BEFORE START
在使用之前
在開始使用前，請務必詳細閱讀此指南
本產品內含細小零件，請存放於兒童與寵物無
法觸及處。
For Chinchilla and Small Pets

CONTAINS
內容物
Tool Pack:
Cross Screwdriver
L Shaped Hex Key x3
Accessories Pack:
Door Handle, Cross Screw x2
Excretion Tray Handle, Hex Socket Screw x2
Leveling Feet x4
工具包：
十字螺絲起子
L型六角扳手 x3
配件包：
門把、十字螺絲 x2
便盆把手、內六角螺絲 x2
支撐腳 x4
TOOL PACK
工具包
ACCESSORIES PACK
配件包

BASIC ASSEMBLY
基本組裝
INSTALL THE DOOR HANDLE
What you need:
Cross Screwdriver
Cross Screw x2
Door Handle
How to do it:
1. Align the holes on the handle and door frame.
2. Fasten the handle and the frame together.
安裝門把
你需要：
十字螺絲起子、十字螺絲 x2
門把
步驟：
1. 對齊門把與門框上的預留孔
2. 將門把與門框用螺絲鎖緊
INSTALL THE EXCRETION TRAY HANDLE
What you need:
L Shaped Hex Key
Hex Socket Screw x2
Excretion Tray Handle
How to do it:
1. Align the holes on the handle and tray panel.
2. Fasten the handle with hex screws from th back.
安裝便盆把手
你需要：
L型六角扳手 、內六角螺絲 x2
便盆把手
步驟：
1. 對齊把手與便盆正面的預留孔
2. 由便盆面板後方將螺絲鎖緊

ADJUST THE JUMP PLATFORM (ALTITUDE)
What you need:
L Shaped Hex Key
How to do it:
1. Release the hex socket screws on the both side
of the xed plate.
* Do not rotate the screws over 180° .
2. Move the both side of the plate to adjust the
altitude.
調整跳台 (垂直方向)
你需要：
L型六角扳手
步驟：
1. 將固定桿兩側的內六角螺絲放鬆
* 請勿將螺絲旋轉超過180°
2. 同時移動固定桿兩側來調整跳台高度
1
2
BASIC ASSEMBLY
基本組裝
ADJUST THE JUMP PLATFORM (HORIZONTAL)
What you need:
L Shaped Hex Key
How to do it:
1. Release the hex socket screws on the middle
of the xed plate.
2. Move the platform to adjust the position.
調整跳台 (水平方向)
你需要：
L型六角扳手
步驟：
1. 將固定桿中間的內六角螺絲放鬆
2. 移動跳台調整位置
1
2

REMOVE THE BUTTOM
How to do it:
1. Raise the jump platform.
2. Rotate the buttom about 45°.
3. Pull the buttom out.
抽出底網
步驟：
1. 將跳台移動到高處
2. 翻轉底網約45°
3. 抽出底網
BASIC ASSEMBLY
基本組裝
1
2
3
INSTALL THE LEVELING FEETS
What you need:
Leveling Feet x4
How to do it:
Fasten the leveling feets on the smaller holes
at the buttom.
* The leveling feets can be replaced by wheels.
安裝支撐腳
你需要：
支撐腳 x4
步驟：
將支撐腳鎖於底部的牙孔上
*支撐腳可選配為滑輪，方便移動

ADVANCED ASSEMBLY
進階組裝
REPLACE THE WALL 1
What you need:
L Shaped Hex Key
How to do it:
Remove the hex socket screws from the
connection blocks.
Remove the vertical screws only.
替換牆面 1
你需要：
L型六角扳手
步驟：
移除頂部連接塊上的內六腳螺絲
僅移除垂直方向的螺絲即可
REPLACE THE WALL 2
How to do it:
Remove the top plate.
You can replace three sides walls freely.
替換牆面 2
步驟：
移除上網模組後
可調整所有牆面組合

ADVANCED ASSEMBLY
進階組裝
REPLACE THE WALL 3
How to do it:
1. Pull the wall modules out
2. Reinstall the walls by your arrangement.
替換牆面 3
步驟：
1. 將牆面模組抽出
2. 依照您想要的排列重新安裝牆面
1
2

ADVANCED ASSEMBLY
進階組裝
FLIP THE DOOR 1
What you need:
Cross Screwdriver
How to do it:
Remove the accessories from the door.
更換開門方向 1
你需要：
十字螺絲起子
步驟：
移除門上配件
DOOR ACCESSORIES
門上配件包

ADVANCED ASSEMBLY
進階組裝
FLIP THE DOOR 3
What you need:
L Shaped Hex Key
How to do it:
Remove the vertical hex socket screws from the
connection blocks which at the top and buttom.
Four hex socket screws need to be removed.
更換開門方向 3
你需要：
L型六角扳手
步驟：
移除位於上下連接塊的垂直內六角螺絲
共需移除四支內六角螺絲
FLIP THE DOOR 2
How to do it:
Remove the door.
更換開門方向 2
步驟：
移除門板

FLIP THE DOOR 4
What you need:
L Shaped Hex Key
How to do it:
1. Pull the both side of door frames out
then switch the position.
2. Rotate the frames 360° and reinstall.
3. Check every hex socket screw which from
FLIP THE DOOR 3 is fastened.
更換開門方向 4
你需要：
L型六角扳手
步驟：
1. 取出兩側的門框，互換位置
2. 將門框旋轉 360° 後重新安裝
3. 確認所有在更換開門方向 3
拆下的內六角螺絲均安裝回去
ADVANCED ASSEMBLY
進階組裝
360°
360°
1
2
1

ADVANCED ASSEMBLY
進階組裝
FLIP THE DOOR 5
What you need:
Cross Screwdriver
How to do it:
1. Flip the door 360°.
2. Put the door at the original position.
3. Use cross screwdriver to reinstall
the door accessories.
更換開門方向 5
你需要：
十字螺絲起子
步驟：
1. 將門水平旋轉360°
2. 將門安裝回原處
3. 以十字螺絲起子重新安裝配件。
360°
1
2

SONG LIANG INCORPORATED COMPANY
淞亮股份有限公司
36647 苗栗縣銅鑼鄉平陽路38-1號
38-1 Pingyang Road, Tongluo, Miaoli 36647, Taiwan
TEL: [phone] |FAX: [phone]
[email protected] |SL-AQUA.COM
Copyright © 2013-2021
Song Liang Incorporated Company
All rights reserved.