Phanteks REVOLT PH-CBKT-CO BK01 User manual

THIS MANUAL SUPPORTS:
PH-CBKT-CO_BK01
PH-CBKT-CO_WT01
PH-CBKT-G5S_BK01
PH-CBKT-G5S_WT01 SUPPORT
US & Canada
[email protected]
International
[email protected]
FOLLOW US ON
SOCIAL MEDIA
Instagram
Phanteks
Facebook
Phanteks
YouTube
Phanteks
Twitter
@phanteks
Cable PCIe GEN5 Starter Set Complete Set
Motherboard 24-PIN 1 1
CPU 4+4-PIN 2 2
PCIe 6+2-PIN 0 7
PCIE GEN5 12VHPWR 1 2
SATA 2 (flat ribbon cable) 3 (sleeved)
SATA | MOLEX 2 (flat ribbon cable) 3 (sleeved)
CABLE QUANTITY
CABLE OVERVIEW:
C
A
BLEK
I
T
MOTHERBOARD 24-PIN
Sleeved 16-AWG motherboard
cable with 3x aluminum combs
CPU EPS 4+4-PIN
Sleeved 16-AWG CPU cable with
2x aluminum combs
PCIe 6+2-PIN
Sleeved 16-AWG CPU cable with
3x aluminum combs
PCIe GEN5 12VHPWR
Sleeved 16-AWG GPU cable with
5x aluminum combs
SATA
18-AWG SATA cable
4x Sata Connectors
SATA | MOLEX
18-AWG SATA and Molex cable
2x Sata and 2x Molex connectors
610
mm
700
mm
750
mm
750
mm
950
mm
810
mm
500mm
450mm
Phanteks will not take responsibility for any damages incurred due to incorrect
installation or usage of this product. This product is intended for use with the Phanteks
Revolt ATX power supplies.
For an up-to-date compatibility list, check www.phanteks.com

CONNECT YOUR CABLES
01
MANUAL
The cables can have a different connection on either end.
Follow this overview to connect the cable to the correct port and
component.
Connect the cables to the Revolt power supply:
CONNECT POWER CABLE
03
BE SAFE!
04
PCIE GEN5 GPU CONNECTOR
02
The PCIe Gen5 (12VHPWR) GPU connector can deliver up to 600
watts to the GPU. Make sure it is fully seated and clicked in to
prevent any damage to your system.
Note that a compatible GPU is required.
Connect the power cable to the power
supply and a grounded power outlet
respectively. Make sure the power supply
is turned off ‘O’ before connecting it to a
power outlet.
The Power Cable is included with the
power supply.
PCIe GEN5
12VHPWR CABLE
CPU | PCIe
8-PIN
PCIE GEN5
12VHPWR
MOTHERBOARD
10+18-PIN
SATA | MOLEX
6-PIN
Switch the power button to the ‘I’ position to turn on your system.
When making any changes to the hardware, be sure that the
power button is switched from the ‘I’ to the ‘O’ position so the
power supply is turned off.
Ensure the connector is FULLY SEATED.
ATTENTION
CABLEK
I
T
PCIe GEN5
12VHPWR CABLE
MOTHERBOARD
24-PIN PCIe 6+2-PIN CPU EPS 4+4-PIN SATA MOLEX