Phase PC0.5 User manual

PC0.5 •PC1.5 •PC3.5 •PC33.5 •PC9.5 •PC-SURROUND-II
Thank you for choosing Phase Technology®speakers. We know
there are a wide variety of choices available today, and we sincerely
appreciate your purchase of our product. Phase Technology
speakers are built to exacting standards and will provide many
years of listening enjoyment.
Our speakers are the result of over ve decades of designing
and manufacturing. We hold many key patents in loudspeaker
technology including the soft-dome tweeter. Our mission, our
passion is to constantly advance the art and science of accurate
audio reproduction. Our dedication insures your new speakers will
accurately reproduce all the impact, detail and delicacy of today’s
digital technology.
Regardless of application, serious audiophile listening or home
theater, we recommend that you take the time to read this manual
thoroughly before connecting speakers to your amplier or receiver.
In the highly unlikely event that you should experience a problem
with set-up or operation, please contact one of our authorized
dealers for assistance, or contact us directly.
Phase Technology Corporation
8005 W. 110th St., Suite 208
Overland Park, KS 66210
855.663.5600 (DOMESTIC)
+1.913.663.5600 (INTERNATIONAL)
Fax: [phone]
TE CH NO LO GY
R
PC0.5
1
[PREMIER COLLECTION FEATURES]
• Patented Flat Piston Woofers that utilize a Tri-Laminate of Kevlar,
RPF™, and Glass Fiber (US Patent #4566178) which generate a
widely dispersed sound from a rigind cone moving as one piece
• Patented Soft Dome Tweeter (US Patent #3328537)
• Absolute Phase®Crossovers, engineered to route sound to a
particular driver and that the particular driver will only produce the
frequencies for which it was designed
SAFETY INSTRUCTIONS 2
GETTING STARTED AND PRECAUTIONARY NOTES 3
HOME THEATER SPEAKER PLACEMENT 3
SUBWOOFER PLACEMENT 4
SPEAKER CONNECTIONS 4
PC-SURROUND-II PLACEMENT AND MOUNTING 5
TWO-CHANNEL SPEAKER PLACEMENT 6
FLOOR SPIKES 6
SPECIAL PRODUCT FEATURES 6
CARING FOR YOUR SPEAKERS 7
MAINTENANCE AND SERVICE 7
TROUBLESHOOTING 7
WARRANTY INFORMATION 7
SPECIFICATIONS 8
OWNER’S MANUAL & INSTALL GUIDE

2
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and other instructions
should be followed.
5. Water and Moisture - The appliance should not be used near
water - for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, etc.
6. Carts and Stands - The appliance should be used only with a
cart or stand that is recommended by the manufacturer.
PORTABLE CART WARNING
7. Wall or Ceiling Mounting - The appliance should be mounted
to a wall or ceiling only as recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its
location or position does not interfere with its proper ventilation.
For example, the appliance should not be situated on a bed, sofa,
rug, or similar surface that may block the ventilation openings;
or placed in a built-in installation, such as a bookcase or cabinet
that may impede the ow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources
such as radiators, stoves, or other appliances that produce heat.
10. Power Source - The appliance should be connected to
a power supply only of the type described in the operating
instructions or as marked on the appliance.
11. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed up or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they
exit from the appliance.
12. Cleaning - The appliance should be cleaned only as
recommended by the manufacturer.
13. Nonuse Periods - The power cord of the appliance should
be unplugged from the outlet when left unused for a long period
of time.
14. Object and Liquid Entry - Care should be taken so that
neither objects fall nor liquids spill into the inside of the appliance.
15. Damage Requiring Service - The application should be
serviced by qualied service personnel when:
a. the power supply cord or the plug has been damaged,
b. objects have fallen onto or liquid has been spilled into the
appliance,
c. the appliance has been exposed to rain,
d. the appliance does not appear to operate normally or exhibits a
marked change in performance, or
e. the appliance has been dropped or the cabinet damaged.
16. Servicing - The user should not attempt to service the
appliance beyond those means described in the operating
instructions. All other servicing should be referred to qualied
service personnel.
17. Grounding or Polarization - Precautions should be taken so
that the grounding or polarization means of an appliance is not
defeated.
Explanation of Graphical Symbols
The lightning ash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the presence
of un-insulated “dangerous voltage: within the product’s
enclosure that may be off sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert you to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR
USAGE
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
PLUG TO WIDE SLOT, INSERT FULLY.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRESE ET POUSSER JUSQU AU FOND.
CAUTION: To reduce the risk of electric shock, do not remove cover
(or back). No user-serviceable parts inside. Refer servicing to qualied
service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

[GETTING STARTED AND PRECAUTIONARY NOTES]
For proper connection and therefore full enjoyment of your new Phase Technology speakers, we encourage you to read this owners’ manual
thoroughly, even if you are very familiar with installing speakers and home entertainment equipment.
Speaker placement is very subjective. Placement follows the guidelines for the developers of multi-channel home entertainment systems, yet
is also guided by personal preferences. The proper spacing, location and adjustment of front, rear and center-channel speakers as well as
subwoofers are critical for complete enjoyment of your new speakers. This manual covers these topics thoroughly.
Before connecting your new speakers or other system components, turn the system power off and unplug your amplier to avoid any
possibility of damage from power surges or unbalanced loads before the system is properly connected.
Observe speaker polarity carefully! Every cable, speaker terminal and amplier connection are clearly marked to show their positive (+) and
negative (-) polarities. For ideal system performance, always connect the positive side of the cable (marked with a stripe, color and /or other
indicator) to the positive terminals on your speakers and amplier and the negative side of the cable to the negative terminals.
Amplier selection is critical to your enjoyment of your new speakers. If you are considering upgrading your current component amplier or
multi-function receiver, we suggest purchasing as much power as your budget can afford. It will always be preferable to have an affordable
high-powered model with fewer “bells and whistles” than a lower-powered model straining to operate near its power limits.
High volume settings that produce audible distortion – indicating an under-powered amplier – could eventually damage your speakers and
your amplier.
Begin and end listening sessions at low volume levels so you will not power up your system the next time with possibly harmful high voltages.
A damaging surge also could result if you change the input source (from FM tuner to CD player, for example) at high volume levels.
If you suspect that one channel of your amplier has failed, have it repaired immediately by your dealer. Damage to your speakers could occur
if you switch between the good and defective channels.
[HOME THEATER SPEAKER PLACEMENT]
Today’s digital multi-channel home theater technology has elevated the art of “surround sound” to reproduce the movie theater experience
in your own home. Speaker requirements and placement are vitally important in reproducing these multi-media effects.
Two front speakers (left and right), two surround speakers (left and right), a center-channel speaker, and a subwoofer dene the
minimum arrangement for modern multi-channel systems. Placement of speakers in your room will impact the nal listening experience.
To position your speakers, there are some general guidelines that take room size, shape, and xtures and furnishings into account. Use
the following illustrations as a general guide for speaker placement in a typical home theater system.
Front speakers should be placed 6-8 feet apart (or on the sides or your screen if your screen is wider) to fully separate the left and right
channels. Whether placed on speaker stands or on shelves, your speakers should be at or slightly above ear level.
Rear surround speakers also should be placed at or slightly above your listening position for the best reproduction of surround-sound
effects. Ideally, they should be facing into your favorite listening position from either side of the room
Center speaker placement should be, if possible, directly on top of or under your TV monitor or projection TV screen. Center speakers
should be placed in a horizontal orientation, directly below (or above) the center of your video screen. This correctly positions the
critical sound track information (usually dialogue) that lmmakers direct to the center channel. Phase Technology center speakers are
magnetically shielded so that they will not interfere with the performance of a video monitor (TV). The two center channel speakers in
the Premier Collection (PC-3.5 and PC-33.5) both include a table-top stand for placement on tables or shelves.
3

[SUBWOOFER PLACEMENT]
Subwoofer placement is less critical, because the frequencies they reproduce are omni directional. This means the human ear doesn’t
perceive these low frequencies as coming from a specic direction, enabling placement of a subwoofer virtually anywhere in the listening
room.
It’s best, however, to keep a subwoofer within the sound eld of the other speakers. The closer the subwoofer is to a wall, the louder and more
intense its bass output will be: this effect is even stronger when the sub is placed in or near a room’s corner. If using two subwoofers, start
by placing them next to the front left and right speakers, in both front corners or one in the corner and one 1/3 of the way along the front wall
from the corner. Each room is different. Experiment with these options or try other locations until you get the best results. If you must choose a
less-than-ideal position, the output level of Phase Technology powered subwoofers is adjustable to compensate for your listening environment.
[SPEAKER CONNECTIONS] Please refer to the diagram on the page 7 for speaker connections.
The following instructions apply whether you are using a separate amplier or Home Theater receiver. For simplicity we will use the term
“amplier” throughout this manual to mean both.
Special note: Turn off and unplug your amplier before connecting speakers.
Special Note: Observe Speaker Polarity Carefully!
Every cable, speaker and amplifier is clearly marked to show their positive (+) and negative (-) terminals.
Amps and speakers may use some combination of these symbols and/or colors to indicate positive
(usually red) and negative (usually black or white) connections. One strand of your cable will also be
ridged and/or marked with a colored line or other indicator on the positive side. For proper polarity
and, thus, ideal system performance, always connect the positive side of the cable to the positive
terminals on your speakers and amplifier and the negative side of the cable to the negative terminals.
5.1 HOME THEATER SYSTEM
In a 5.1 home theater system, the center channel (C) should be placed at
0º directly below or above the video screen, the left front (LF) and right front
(RF) speakers should be placed at 30º from the listening area, and the left
and right surrounds (LS and RS) should be placed at 110º. All ve speakers
should be placed at or near ear level.
7.2 HOME THEATER SYSTEM
In a 7.2 home theater system, the center channel (C) should be placed at
0º directly below or above the video screen, the left front (LF) and right front
(RF) speakers should be placed at 30º from the listening area, and the left
and right surrounds (LS and RS) should be placed at 90º. The left rear (LR)
and right rear (RR) speakers should be placed at 150º. All seven speakers
should be placed at or near ear level.
4

FRONT SPEAKERS: The pair of front speaker connections (left and right) on your amplier will be labeled “Front” or “Main.” Connect the
speaker cables for your left and right front speakers using these terminals and then connect the cables to the front satellites. Observe positive
and negative polarities.
PC9.5 BI-WIRING: The PC9.5 speaker is equipped with bi-wiring, with four speaker terminals instead of two. This may enhance speaker
performance by using an additional pair of speaker cables. In order to bi-wire this speaker, remove the gold-plated strips between the speaker
terminals and connect two cables between your amplier’s positive output terminal and the two positive (red) terminals on the speaker. Then
connect the other two cables between the amp’s negative output terminal and the two negative (black) terminals on the speakers. If you
choose not to bi-wire your speakers, do not remove the metal strips between the speaker terminals. Connect each cable in the standard
manner, with one cable each between the positive and negative speaker terminals and your amplier.
CENTER SPEAKER: The center speaker connections on your amplier will be labeled “Center” or “Center Channel.” Connect the speaker
cables for your center channel speaker using these terminals and then connect the cables to the center speaker. Observe positive and
negative polarities.
SURROUND SPEAKERS: The pair of surround connections (left and right) on your amplier will be labeled “Surround.” Connect the
speaker cables for your left and right surround speakers using these terminals and then connect the cables to surround satellite speakers.
Observe positive and negative polarities.
Premier Collection Surround speakers are marked with arrows indicating “left” or “right” to denote how
the speaker should point into the listening area. Make sure you are connecting the proper speaker to the
proper set of wires before mounting.
5
REAR SPEAKERS (USED IN A 7.1 OR 7.2 SYSTEM): The pair of rear connections (left and right) on your amplier will be labeled
“Rear.” Connect the speaker cables for your left and right rear speakers using these terminals and then connect the cables to the rear
satellite speakers. Observe positive and negative polarities.
[PC-SURROUND-II PLACEMENT AND MOUNTING]
The PC-Surround-II rear-effects home-theater speaker offers you wide latitude of acoustic performance, system options and speaker
placement (including wall, shelf and stand mounting.) Using the toggle switch located adjacent to the speaker terminals on the rear of
the cabinet, the speaker can be changed from bipolar to dipolar mode to suit personal listening preferences.
In bipolar mode, the PC Surround serves as a full range speaker system to meet the recommended technical specications for rear
surround speakers in a Dolby Digital and DTS 5.1-7.2 home theater systems. As a dipolar speaker, it offers the diffused, subtle effect of
out-of-phase drivers with a strong on-axis null polar pattern for more diffused surround effects.
In order for this effect to work in proper phase with the other speakers in your home theater they need to be placed in the proper
orientation. Whether they are mounted on a stand, shelf or hung upside down on a wall the direction the arrows point on the rear of
the cabinets will help you orient the surround speakers properly. For 5.1 systems when placed on a sidewall the arrows should point
forward toward the front main speakers. When placed on a rear wall the speakers should be oriented so the arrows point away from
each other. For 7.1 systems the rear speakers should be placed so the arrows are pointing toward each other . The side speakers remain
as mentioned above.
The convenient “Key-hole” style mounting bracket on the rear of the speaker can be used for surface mounting with the appropriate
mounting anchor. Please be sure that the anchor has a #8 or #10 screw head on it to properly t the hanger. Other types of standard
speaker mounts may be used with the speakers as well. Please check with your Phase Tech dealer for recommendations.
Note: It is very important whichever method you use to be certain the mounting screws or anchors will support the weight of the speaker.
Self-stick rubber bumpers are provided with the PC Surround. A bumper should be attached to each rear corner of the cabinet. These
bumpers space the speaker away from the wall to allow clearance for your speaker wires.

[TWO-CHANNEL SPEAKER PLACEMENT]
Phase Technology speakers utilize our Absolute Phase®crossover network. This design permits a much wider vertical output pattern than
conventional speakers, allowing you to achieve the best quality musical experience regardless of speaker placement. For example, your
speakers can be placed either vertically or horizontally on a bookshelf and will provide seamless transition of sound from one speaker to
another even if the speakers cannot be placed at the traditional “ear level” height recommended by most manufacturers.
In most rectangular rooms speakers sound best when placed along one of the short walls. Begin by placing the speakers 1 – 3 feet away
from the wall and approximately 6 – 8 feet apart. The exact nal placement will be determined by how far away you are sitting from the
speakers and other interior environmental factors. We suggest playing a familiar piece of music and adjusting the placement of the speakers
until the desired sound is achieved.
Sometimes larger bookshelf speakers will sound better when placed upon stands designed expressly for the purpose of supporting them
above oor level (not included). By “de-coupling” the speaker cabinet from the oor, bass frequencies are tighter and high frequencies more
distinct. Smaller speakers can be placed in bookshelves or cabinets; however, some loss of imaging may be experienced.
[FLOOR SPIKES]
Floor spikes may have been provided with your new Phase Technology speakers to steady the speaker cabinets, especially on carpet-
ing and uneven oor surfaces. Because most speakers tend to rock back and forth in small increments due to the force of the in/out
motions of speaker drivers, these movements can affect the speakers’ performance.
Attach the oor spikes by screwing them into the pre-drilled holes in the base of the speaker and tighten the nuts securely. The sharp
points will penetrate the carpet to make a more solid contract with the underlying oor surface. If your oor is not rigid, the spikes may
actually add to the rocking motion, so we recommend you audition the speakers with and without the spikes inserted to see if you
discover a personal preference in the sound quality.
Be especially careful when moving speaker cabinets with the spikes attached, as the points could damage carpeting or scratch oors.
[SPECIAL PRODUCT FEATURES]
Adjusting Variable-Axis, Soft-Dome Tweeters
Some Phase Technology speakers feature the company’s acclaimed variable-axis soft-dome tweeter (refer to the model specications
in this manual) offering even greater latitude in selecting speaker locations and listening positions. This revolutionary tweeter can be
6

7
[CARING FOR YOUR SPEAKERS]
All Phase Technology speakers are nished with a high degree of craftsmanship in either hand polished paint or vinyl laminates. We
recommend using a lint-free rag with a small amount of glass cleaner to maintain the long-lasting beauty of the nish. Avoid products
containing silicones, oils, oil derivatives, or solvents. Enclosures nished in vinyl laminates may be cleaned with a damp cloth as
necessary.
[MAINTENANCE AND SERVICE]
Because of Phase Technology’s uncompromising quality control programs, it’s unlikely that your speakers will ever need service if
connected and used as outlined in this Owners’ Manual. In the unlikely event that a problem does occur, please contact your Phase
Technology dealer. Your dealer has the necessary factory-authorized parts and trained technicians to quickly restore your speaker to its
original performance specications.
[TROUBLESHOOTING]
NO SOUND
1. Verify that all components are plugged in and turned on.
2. Check all speaker wires and cables for loose connections.
3. Check to see if you have selected the proper source on your amplier.
VOICES DO NOT APPEAR TO COME FROM BETWEEN THE SPEAKERS / BASS RESPONSE IS WEAK
1. Verify that all speaker connections from the amplier to the speakers are running PLUS+ to PLUS+ and MINUS- to MINUS-.
2. Check to see if there are any furnishings or plants that may be blocking the output of a speaker.
SOUND, BUT NO BASS (MOST LIKELY IN SYSTEMS WITH A SUBWOOFER)
1. Verify that the subwoofer is plugged into an AC outlet and power is turned on.
2. Check that the speaker wire / cable going from the amplier/receiver to the subwoofer is securely fastened.
3. Check the volume control of the subwoofer.
4. Refer to your amplier/receiver manual to make sure you have adjusted its bass output properly.
MUDDY OR BOOMY BASS
1. Check the volume control for the subwoofer. Excess volume can cause speakers to sound distorted and unnatural.
2. Try adjusting the crossover control on the subwoofer or the subwoofer setup on your receiver to a slightly lower frequency (example:
reduce from 120 Hz to 80 or 60 Hz).
3. If the subwoofer or full size speaker is close to a corner, side or back wall, try moving it away from the wall. This may reduce the
“boomy” bass considerably.
4. Bookshelf speakers placed in a semi-enclosed space or cabinet can articially emphasize bass output. Reduce the bass control on
your amplier or move the speakers to the front of the cabinet. Alternatively, reposition the speakers to a more open location.
DISTORTED SOUND FROM THE SPEAKERS
1. This problem is usually caused by setting the volume control too high. Reduce the amplier/receiver volume to a lower level.
2. If noise and distortion are audible at higher volume levels, your amplier may not be powerful enough. Consider upgrading to a unit
with higher power.
NOTE: Remember, even though your Phase Technology speakers can handle considerable power levels, ANY speaker if used improperly can
be damaged. Consult your Phase Technology dealer for assistance in choosing a new amplier or receiver.
[WARRANTY]
LIMITED WARRANTY: Phase Technology warrants its loudspeakers to be free from defects in material and workmanship for a period
of ten (10) years for speaker product, limited lifetime for CI speakers, and three (3) years for the electronic components to the original
purchaser. Purchase must be made from an authorized Phase Technology dealer.
This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in transit, alterations,
unauthorized repairs, failure to follow instructions, re, ood or any other cause beyond the reasonable control of Phase Technology.
Defects in speaker cabinets or grilles must be brought to the attention of your dealer immediately after purchase. This warranty will be
void if the products’ serial number has been altered or removed.
Should your Phase Technology product require service, please call the MSE Audio customer service department for a return authorization.
All merchandise returned to Phase Technology without prior authorization will be refused. For your return authorization number, please
call 855.663.5600 or email [e-mail].

[SPECIFICATIONS]
Description:
Tweeter:
Midrange:
Woofer:
Frequency Response:
Sensitivity:
Impedance:
Height:
Width:
Depth:
Weight:
Finish Options:
Optional Accessories:
2-way bookshelf
1” patented soft dome
N/A
5.25” RPF/NBR at piston
58 Hz - 22 kHz
88 dB
4Ω
11.5”
6.9”
9.6”
11 lbs.
Gloss Black
SST28 Speaker Stand
2-way Bookshelf
1” patented soft dome
N/A
6.5” RPF/NBR at piston
40 Hz - 22 kHz
90 dB
4Ω
13.6”
7.9”
12.3”
14 lbs.
Gloss Black
SST28 Speaker Stand
3-way LCR Center
1” patented soft dome
N/A
(2) 5.25” RPF/NBR at piston
56 Hz - 22 kHz
90 dB
4Ω
6.9”
18”
9.6”
18.5 lbs.
Gloss Black
SST28 Speaker Stand
3-way LCR Center
1” patented soft dome
N/A
(2) 6.5” RPF/NBR at piston
36 Hz - 22 kHz
91 dB
4Ω
22”
7.9”
12.3”
32 lbs.
Gloss Black
SST28 Speaker Stand
Description:
Tweeter:
Midrange:
Woofer:
Frequency Response:
Sensitivity:
Impedance:
Height:
Width:
Depth:
Weight:
Finish Options:
Optional Accessories:
4-way Tower
1” patented soft dome
1.5” soft dome
(3) 6.5” RPF/NBR at piston
32 Hz - 22 kHz
91 dB
4Ω
45.5”
9”
14.7”
66 lbs.
Gloss Black
N/A
2-way Switchable Bipole/Dipole Surround
(2) 1” patented soft dome
(2) 4” polyproplene dome
6.5” RPF/NBR at piston
60 Hz - 22 kHz
89 dB
4Ω
15.5”
14.5”
5.25”
19 lbs.
Gloss Black and Satin White
N/A
2-way Limited Edition Bookshelf
1” patented soft dome
N/A
6.5” RPF/NBR at piston
60 Hz - 22 kHz
88 dB
4Ω
13.25”
8.625”
8.25”
16 lbs.
Oak and Black Oak
N/A
Copyright © 2014 MS Electronics, LLC. All rights reserved. MSE Audio, Phase Technology and PhaseTech are registered trademarks and
“Speakers for your Life” is a trademark of MSE Audio, Overland Park, Kansas USA. Phase Technology is part of MSE Audio®. www.phasetech.com.
8