Philco PWM 15 PL User manual

PWM 15 PL
AUTOMATIC WASHING
MACHINE
USER'SMANUAL

Dear customer,
Thank you for buying aPHILCO brand product. So that your appliance serves you well, please read all
the instructions in this user'smanual.

EN - 1
09/2013Copyright © 2013, Fast ČR, a. s.
CONTENTS
PART 1: BEFORE PUTTING INTO OPERATION................................................................................................. 2
• Important safety instructions.....................................................................................................................................................2
• General safety information..........................................................................................................................................................2
• Recommendations.........................................................................................................................................................................3
PART 2: INSTALLATION.................................................................................................................................... 4
• Removal of the transportation screws....................................................................................................................................4
• Levelling the washing machine.................................................................................................................................................4
• Electrical connection.....................................................................................................................................................................5
• Water supply connection.............................................................................................................................................................5
• Water drain connection................................................................................................................................................................6
PART 3: DESCRIPTION OF THE APPLIANCE AND THE CONTROL PANEL....................................................... 7
• Description of the appliance......................................................................................................................................................7
• Control panel....................................................................................................................................................................................8
• Washing detergent drawer .........................................................................................................................................................8
• Program selection dial ...............................................................................................................................................................10
PART 4: WASHING YOUR LAUNDRY .............................................................................................................. 11
• First wash cycle.............................................................................................................................................................................11
• Operating the washing machine ........................................................................................................................................... 12
• Additional functions................................................................................................................................................................... 13
• Child safety lock ........................................................................................................................................................................... 14
PART 5: PROGRAM CHART ............................................................................................................................ 15
PART 6: MAINTENANCE AND CLEANING...................................................................................................... 16
• Water inlet lters.......................................................................................................................................................................... 16
• Pump lter...................................................................................................................................................................................... 17
• Washing detergent drawer ...................................................................................................................................................... 17
• Siphon plug ................................................................................................................................................................................... 18
• Cabinet of the washing machine...........................................................................................................................................18
• Drum................................................................................................................................................................................................. 18
• Removal of scale deposits from the washing machine.................................................................................................. 18
PART 7: PRACTICAL INFORMATION.............................................................................................................. 19
PART 8: PREVENTION OF MINOR MALFUNCTIONS ..................................................................................... 20
PART 9: AUTOMATIC MALFUNCTION DETECTION SYSTEM ........................................................................ 22
PART 10: INFORMATION SHEET .................................................................................................................... 23

EN - 2
09/2013Copyright © 2013, Fast ČR, a. s.
PART 1: BEFORE PUTTING INTO OPERATION
Important safety instructions
• Read carefully and store for future use.
• The safety of this appliance complies with industry norms and meets legal appliance safety requirements.
However, as manufacturers, we consider it our duty to provide you with the following safety instructions.
• It is essential that you store this user'smanual in asafe place so that you can use it in the future. If you intend
to sell the appliance, give it to another owner, or if you move, always make sure that the user'smanual is
attached to the appliance, so that the new owner can learn about the operation of the appliance and the
relevant warnings.
• Before installation or operation of the appliance you MUST carefully read all the safety instructions and
the user'smanual.
• Before putting the appliance into operation for the rst time, check that it has not been damaged during
transport.
• Never connect adamaged appliance. If some parts are damaged, contact the supplier.
• If the washing machine is supplied in the winter months, when the temperature falls under 0°C, store the
appliance at room temperature for 24 hours before rst use.
General safety instructions
• Changing the technical parameters or making any other modications to the appliance is dangerous.
• During the course of the high temperature program the door heats up to ahigh temperature. Do not
touch the door!
• Ensure that small household pets cannot get into the drum. It is therefore better to always check the inside
of the drum before use.
• Items such as coins, safety pins, nails, bolts, stones and other heavy or sharp items can cause considerable
damage and do not belong in the appliance.
• Use only the recommended amount of fabric softener and washing detergents. If you use ahigher amount
than is recommended, the fabric could be damaged.
• Always use the amount of detergent recommended by the manufacturer.
• Small pieces of laundry such as socks, shoelaces, washing bands, etc. should be washed in a special
purpose washing bag or in apillow case, because the individual items could become jammed between
the tube and the rotating drum.
• Do not use the washing machine to wash products from metal skeletons, fabrics which are not hemmed
or that snag.
• After use, before cleaning or maintenance always disconnect the washing machine from the power supply
and turn o the water inlet.
• Never attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may lead to
injuries or serious damage to the appliance. Contact your local service centre for repairs. Always request
original spare parts.
• Do not use multi-sockets or extension cords.
• Do not plug in the appliance with adefective power cord.
• If the power cord is damaged, have it replaced by the manufacturer or an authorised service technician to
prevent hazardous situations.
• Do not pull the power plug out of the power socket by pulling on the cord. Hold the power cord by holding
the power plug directly.
• Do not connect the power plug if you have wet hands.
• Never touch the appliance if you have wet hands or feet.

EN - 3
09/2013Copyright © 2013, Fast ČR, a. s.
• Never open the detergent drawer while washing.
• Never attempt to open the washing machine door while washing.
• Because the washing machine can become very hot during operation, do not touch the hose during the
draining or lling process.
• In the event of any defect, rst turn o the appliance, disconnect it from the power supply and shut o the
water inlet. Do not attempt to repair the device yourself. Contact the nearest authorised service.
• Do not forget that the packaging material from the washing machine may present adanger to children.
• Do not allow children to play with the washing machine.
• Keep household pets at asafe distance from the washing machine.
• The washing machine should only be used by persons fully instructed about the instructions, provisions
• and controls described in this user'smanual.
• This washing machine is designed for domestic use only. The use of the washing machine for commercial
purposes voids the
• warranty.
• Do not install the appliance on acarpet or another similar surface, which could block the ventilation vents
on the underside.
• Do not place the drain hose into acontainer, bucket or sink.
Recommendation
• Long term contact of washing detergents and fabric softeners with air will cause them to dry out and stick
to the walls of the compartments. To prevent this from happening, ll the drawer with washing detergent
and fabric softener immediately before washing.
• We recommend the use of aprewash only for heavily soiled laundry.
• Do not exceed the maximum loading capacity of the drum.
• This appliance must not be used by persons (including children) with physical, sensory or psychological
impairments or by inexperienced persons, unless properly trained or schooled in the safe use of the
appliance, or unless they have been properly supervised by aperson who will be responsible for their
safety. Children should be supervised so as not to play with the appliance.
• If you will not be using the washing machine for an extended period of time, disconnect it from the power
socket, shut o the water inlet and leave the door open so that the inside of the washing machine can dry
out and so unpleasant odours are not created.
• As aresult of quality control procedures some water may remain in the washing machine. This will not
damage the washing machine in any way.
• We recommend that the rst wash is performed in the White 90 - 95° program (depending on the model)
without any laundry, put 1/2 ameasuring cup of washing agent into the second draw for the washing
agent.
• Install the washing machine in alocation where it will be possible to fully open the door of the washing
machine. (Do not install the washing machine in alocation where it will not be possible to fully open the
door).
• Make sure that there is sucient ventilation and air circulation around the washing machine.

EN - 4
09/2013Copyright © 2013, Fast ČR, a. s.
PART 2: INSTALLATION
Carefully read the entire user'smanual before putting your washing machine into operation and store it in
asafe place for future reference.
Removal of the transportation screws
• You must remove the transportation screws located in the back part of the washing machine before
putting it into operation.
• Loosen the bolts using acorrectly sized spanner, turning it anticlockwise.
• Remove the bolts by pulling them out.
• Insert the plastic plugs found in the accessories pouch into the transportation screw holes.
• Carefully store the transportation screws removed from the washing machine for future transport purposes.
X4X4
X4
NOTE:
Defects caused by startng the washng machne wth the transportaton screws nstalled are not covered
by the warranty.
Levelling the washing machine
• Do not place the washing machine on carpets or similar surfaces.
• To ensure quiet and vibration free operation of your washing machine, you should place it on an even,
non-slip and rigid surface.
You can level the washing machine by adjusting the adjustable feet:
• First loosen the plastic nut.
• Adjust by screwing out the feet upwards or downwards.
• After levelling the washing machine, re-tighten the plastic nut by screwing it upwards.
• Never level the washing machine on an uneven surface by placing cardboard, wooden blocks, etc. under the feet.
X4

EN - 5
09/2013Copyright © 2013, Fast ČR, a. s.
Electrical connection
• Technical specications of your washing machine: 220-240 V~ 50 Hz.
• Aspecial grounding plug is attached to the power cord of your washing machine.
This plug must be fully inserted into agrounded power socket (with 10 A). The
fuse or circuit breaker to which the washing machine is connected should be 10A.
If you do not have such sockets and fuses/circuit breakers at home, have them
installed by aqualied electrician.
• Our company takes no responsibility for any damages caused by using the washing
machine without grounding.
Water supply connection
• Depending on the functions of your washing machine, the washing machine is equipped with either
asingle water inlet (cold) or adouble water inlet (cold/hot). The hose with the white end is intended for
the cold water inlet and the hose with the red end is intended for the hot water inlet (on washing machines
with ahot and cold water inlet).
• To prevent water from leaking from the connection points, the hose kit also includes 1 seal (for washing
machines with acold water inlet) or 2 seals (for washing machines with hot and cold water inlets). Install
these seals on the end of the water inlet hose connected to the tap.
• Connect the hose with the white end to the water inlet valve with the white lter and the hose with the red
end to the water inlet valve with the red lter (the second mentioned option applies to washing machines
with ahot and cold water connection). Tighten the plastic connecting parts using your hand. Aqualied
plumber will provide asafer connection.
• The water pressure of 0.1 - 1 MPa in your water tap will ensure amore ecient operation of your washing
machine (the pressure of 0.1 MPa equates to aow rate of more than 8 litres of water per minute from
afully open tap).
• After completing all connections, check that the connections do leak, by fully opening the tap.
• Check that the supply hoses are not bent, broken or cracked.
• Connect the supply hose to a3/4" threaded water tap.
• If the washing machine has adual water supply (for hot and cold water), the temperature of the hot water
should not exceed 70 °C.
3/4”
10 mm

EN - 6
09/2013Copyright © 2013, Fast ČR, a. s.
Water drain connection
• Check that the supply hoses are not bent, twisted, cracked or excessively stretched.
• The drain hose should be installed at aheight of min. 60 cm and max. 100 cm above the ground.
• The end of the drain hose may be inserted directly into the drain opening or to a special end tting
attached to the drain of the wash basin.
• Never attempt to extend the length of the drain hose by adding extra parts.

EN - 7
09/2013Copyright © 2013, Fast ČR, a. s.
PART 3: DESCRIPTION OF THE APPLIANCE AND THE
CONTROL PANEL
Description of the appliance
1.
2.
3.
4.
5.
6.
7.
8.
9.
6.
6.
6.
1. Program selection dial
2. Top cover
3. Drawer for washing detergents
4. Drum
5. Pump cover
6. Transportation screws
7. Water inlet valve
8. Drain hose
9. Power cord

EN - 8
09/2013Copyright © 2013, Fast ČR, a. s.
Control panel
1. 2. 3. 4. 5.
6. 7. 8.
1. Drawer for washing detergents
2. Start/Pause button
3. Function buttons
4. End of program indicator light
5. Program selection dial
6. Start/Pause indicator light
7. Function indicator lights
8. Program indicator light
Washing detergent drawer
Liquid washing detergent adapter
Main washing compartment
Fabric softener compartment
Prewash compartment
If you are going to use aliquid washing detergent, it is necessary to use aspecial liquid detergent adapter.
(You will nd it in the washing machine'saccessories.) You can use liquid detergents for all washing programs
without aprewash. Place the adapter into the main wash compartment – see illustration above; and pour in
the liquid washing detergent as necessary. Do not go over the maximum mark. Always remove the adapter
when using apowder washing detergent.
NOTE:
Accessories may vary depending on the model.

EN - 9
09/2013Copyright © 2013, Fast ČR, a. s.
Main washing compartment
Into this part of the drawer, place only washing detergent (liquid or powder), lime scale remover, etc. When
using aliquid washing detergent use the special adapter. You will nd it in the washing machine'saccessories.
Fabric softener compartment
In this part, only use fabric softener (we recommend that you use the amount and type of fabric softener according
to the instructions of the manufacturers of the fabric softener and the laundry). Sometimes remains of the fabric
softener may remain in the compartment. This is because fabric softeners are viscous (sticky). To prevent this from
occurring, we recommend that you use afabric softener that is less viscous (i.e. sticky) or you can dilute it using water.
Prewash compartment
Fill this compartment only if the prewash function is selected. We recommend that you use this function only
for heavily soiled laundry. More information further in the user'smanual.

EN - 10
09/2013Copyright © 2013, Fast ČR, a. s.
Program selection dial
1
2
3
4
5
6
8
9
10
11
12
7
40°C
60°C
4
Using the program selection dial, select aprogram, in which you wish to wash your laundry. The program
selection may be done by turning the program selection dial in both directions. When making settings, ensure
that the symbol on the program selection dial exactly matches your selected washing program. If you switch
the program selection dial to position O(o), the washing machine will drain the water so as to complete
(cancel) the program cycle. After completing the draining operation the washing machine will switch to the
stand-by mode. Now you can select another program that you want to start.

EN - 11
09/2013Copyright © 2013, Fast ČR, a. s.
PART 4: WASHING LAUNDRY
• Connect the washing machine to apower socket.
• Open the water inlet.
First wash cycle
There may be some water left over inside the washing machine from the factory tests. We therefore recommend
to perform the rst wash without laundry so as to drain this water; put half ameasure of standard detergent
into compartment 2, which is used for washing detergents and select the program for cotton at 90 °C.
Sorting laundry
• Sort the laundry according to its type (cotton, synthetics, delicates, wool, etc.), washing temperature and
the level of dirtiness.
• Never wash whites together with coloured laundry.
• Because your new coloured laundry may release some of its colour, wash it separately.
• Before placing the laundry into the washing machine check pockets for any forgotten items. In this way
you will prevent damaging your clothes and the washing machine.
• Do up zips and buttons on the laundry.
• From curtains and drapes remove the plastic or metal hooks or insert the into awash bag and tie it up.
• Turn clothing such as pants, knitted fabrics, T-shirts and singlets inside out.
• Wash small items such as socks and handkerchiefs in awash bag.
Washing symbols
Suitable for bleaching Do not bleach.
Standard washing Maximum ironing temperature
is 150 °C
Maximum ironing temperature
is 200 °C Must not be ironed.
Dry cleaning possible Must not be dry cleaned.
Dry on aat underlay. Hang after spin drying.
Hang to dry. Do not spin dry.
Cleaning only with
perchloroethylene, gas, alcohol
or R113
Cleaning only with
perchloroethylene, gas, alcohol
or R113
Dry cleaning with all types of
agents

EN - 12
09/2013Copyright © 2013, Fast ČR, a. s.
Operating the washing machine
Placing laundry into the washing machine
• Open the door of the washing machine.
• Check that there are no foreign objects, laundry or animals in the drum. The drum could contain laundry
from the previous wash. Remove the laundry from the washing machine.
• Arrange the laundry evenly inside the washing machine. Fold large items such as bed sheets or covers in
the manner shown in the illustration below.
• Insert one item at atime.
• When closing the door, make sure that no laundry has been caught in the door.
• Check that the washing machine door is properly closed.
• Firmly close the washing machine door, otherwise the washing machine will not start.
NOTE:
Maximum loading capacity may wary based on the laundry type you will wash, degree of contamination
and the programme you have chosen etc. Do not exceed maximum dry loading capacity indicated in the
programme table for washing programmes.
You can take the following table of weights as an example.
Laundry type Weight (g)
Towel 200
Linen 500
Bathrobe 1200
Quilt cover 700
Pillow slip 200
Underwear 100
tablecloth 250
Detergent dosage
The amount of detergent you use in the washing machine depends on the following criteria:
• The consumption of detergent changes with the degree of dirtiness of the laundry.
• Do not use aprewash for lightly soiled laundry and use asmall amount of detergent in compartment 2 of
the drawer for washing detergents.
• We recommend the use of the prewash only for heavily soiled laundry.
• For excessively soiled laundry select aprogram with aprewash, put 1/4 of adetergent measuring cup into
compartment 1 for washing detergents and put the remainder of the measuring cup into compartment 2.
• Use washing detergents specially made for automatic washing machines. The dosage of the detergent is
shown on the packaging.
• Increased water hardness necessitates the use of an increased amount of detergent in the wash.
• Increased laundry loads also necessitate the use of an increased amount of detergent in the wash.
• Pour fabric softeners (conditioners) into the fabric softener compartment in the detergent drawer. Do
not go over the MAX mark. Otherwise the fabric softener will ow out the siphon into the water used for
washing. If the fabric softener is very thick then dilute it with water before placing it in the compartment.
The thick fabric softener could clog up your siphon and so prevent the fabric softener from entering the
washing machine.
• You can use liquid detergents for all washing programs without aprewash. Place the adapter into the 2nd
compartment intended for the main wash and pour in the liquid washing detergent as necessary.

EN - 13
09/2013Copyright © 2013, Fast ČR, a. s.
Selecting programs and functions
Select aprogram and additional functions appropriate for your laundry using the program selection dial.
Additional functions
Before starting aprogram, you can add additional functions to improve washing results.
Press the respective button of the additional function. The symbol of the additional function will start ashing
on the display. If the symbol of the additional function ashes only for an instant then the function is not
available.
NOTE:
Additional functions are not compatible with all the programs.
There is only alimited time period for the selection of an additional function.
The combination of individual additional functions is not available for all programs.
Half load detection system
The washing machine is equipped with asystem that detects ahalf drum load. If you place half the maximum
laundry load or even less into the drum, the washing machine will automatically identify this fact and shorten
the washing cycle, thus lowering water and power consumption.
No spin
This function is suitable for washing delicate laundry. Press this button to activate this function and the
spinning process will commence.
Prewash
The prewash function can be added to the main wash, which is especially suitable for heavily soiled laundry.
When using this function, it is necessary to put washing powder into the prewash compartment.
Press the prewash button to activate this function.
NOTE:
The prewash function will extend the selected program by acertain amount of time. This time depends
on the type of selected program. Do not use liquid washing detergents in the prewash compartment.
Starting aprogram
Start the selected program by pressing the Start/Pause button.
If you press this button while aprogram is running then this program will be paused.
If the washing machine goes into the stand-by mode, the Start/Pause indicator light will ash shortly.
Cancelling aprogram
Cancelling aprogram that is currently running
Turn the program selection dial to the 0 position.
The washing machine will stop and the program will be cancelled.
To drain the water, turn the program selection dial to any position.
The water will be drained automatically.
Now you can select anew program.

EN - 14
09/2013Copyright © 2013, Fast ČR, a. s.
End of aprogram
The selected program will be ended automatically after the last stage.
The end of program indicator light will be lit.
Move the program selection dial to the 0 position.
Pull the power cord out of the power socket.
Shut o the water inlet.
Open the drum door and take the laundry out.
After completing the wash, leave the door of the washing machine open so that the water remaining in the
drum can dry out.
Important
You will only be able to open the door after 2 minutes because they will be blocked. This time is not
included in the total washing cycle time.
Child Safety Lock
The child safety lock function serves to block the washing machine controls and prevent an unauthorised
change to the program or the washing machine'ssettings.
Press and hold down the rst and third button on the control panel for approximately 3 seconds.
To cancel the child lock, press and hold down the rst and third button on the control panel simultaneously
for approximately 3 seconds.

EN - 15
09/2013Copyright © 2013, Fast ČR, a. s.
PART 5: PROGRAM TABLE
Program Temper-
ature
Max. dry
laundry load
Compart-
ment
Duration Laundry description
Cotton 90° 90 °C 5.0 kg 2 155 min
Heavily soiled cotton, linen laundry
(underwear, table cloths, towels (max.
2.5kg), bed linen, etc.)
Cotton
prewash 60 °C 5.0 kg 1 + 2 140 min
Soiled cotton, linen laundry (underwear,
table cloths, towels (max. 2.5 kg), bed
linen, etc.)
Cotton 60 ° 60 °C 5.0 kg 2 190 min
Soiled cotton, linen laundry (underwear,
table cloths, towels (max. 2.5 kg), bed
linen, etc.)
Cotton 40° 40 °C 5.0 kg 2 180 min
Soiled cotton, linen laundry (underwear,
table cloths, towels (max. 2.5 kg), bed
linen, etc.)
40°C Eco 40 °C 5.0 kg 2 80 min
Soiled cotton, linen laundry (underwear,
table cloths, towels (max. 2.5 kg), bed
linen, etc.)
Quick wash 30 °C 2.5 kg 2 30 min Lightly soiled cotton or linen laundry
20°Eco 20 °C 2.5 kg 2 102 min
Lightly soiled cotton, linen laundry
(underwear, table cloths, towels (max.
2kg), bed linen, etc.)
Synthetics
60 °C 60 °C 3.0 kg 2 84 min Soiled synthetic laundry (nylon socks, shirts, blouses, other synthetic laundry, etc.)
Synthetics
40 °C 40 °C 3.0 kg 2 64 min
Lightly soiled synthetic laundry (nylon
socks, shirts, blouses, other synthetic
laundry, etc.)
Synthetics
without
heating
-3.0 kg 2 72 min
Lightly soiled synthetic laundry (nylon
socks, shirts, blouses, other synthetic
laundry, etc.)
Delicates
30 °C 30 °C 2.0 kg 2 70 min
Laundry suitable for washing by hand or
delicate laundry suitable for washing in
awashing machine.
Wool 30 °C 2.0 kg 2 73 min Woollen laundry suitable for washing in
awashing machine.
Rinse -- - -If you need to include an additional rinse
in the washing program.
Spinning
-- - -If you need to include an additional spin
cycle in the washing program.
Drain -- - -
This product is used for draining water
before the programmed end of aselected
cycle.
NOTE:
The resulting washing cycle time may vary depending on the amount of laundry, type of water, ambient
temperature, selection of additional functions, etc.
Dose the amount of washing powder based on the amount of laundry placed into the drum of the
washing machine.

EN - 16
09/2013Copyright © 2013, Fast ČR, a. s.
PART 6: MAINTENANCE AND CLEANING
• Disconnect the washing machine from the power socket.
• Shut o the water inlet.
CAUTION!
The washing machine and its components could be damaged if you use agents containing solvents. Do
not use washing detergents or fabric softeners containing solvents.
Water inlet lters
There are lters connected to the hose ends at the tap end and at the end of the inlet valves, which prevent dirt
and foreign materials contained in water entering the washing machine. If the washing machine is not lling
up with asucient amount of water despite the water inlet being open, clean these lters.
• Disconnect the supply hose.
• Using tweezers take the lters out of the inlet valves and clean them with abrush.
• Using your hand, take out the lters on the supply hoses at the end connected to the tap together with
the seals and clean them.
• After cleaning the lters, put them back in the same way.
WARNING:
The water inlet lters may become clogged as aresult of aconnection to poor quality water or insucient
maintenance, etc. Dirty lters result in water leaks that may cause damage to the washing machine
and property. Damages caused by incorrect maintenance of the lters are not covered by the warranty
conditions.

EN - 17
09/2013Copyright © 2013, Fast ČR, a. s.
Pump lter
The pump ltration system extends the life of the pump, which is used for draining dirty water. It ensures that
lint from the laundry does not enter the pump. We recommend you clean the pump lter every 2-3 months.
Clean the pump lter as follows:
• Open the cover on the bottom strip using the measuring cup or adapter (depending
on the model). Before opening the lter cover, place acontainer in front of it, into
which the water remaining in the washing machine will ow.
• Loosen the lter cover by turning it anticlockwise and drain the water.
• Remove all foreign material from the lter.
• Check by hand that the pump rotates.
• After cleaning the pump, return the lter by turning it clockwise.
• Reattach the kick plate cover.
• Don't forget that if you do not reinstall the lter correctly, water will leak from your
washing machine.
WARNING:
Danger of scalding!
Because the water in the pump may be very hot, wait until it has cooled down.
Drawer for washing detergents
Over time washing detergent deposits may accumulate in the drawer and in the washing machine opening.
Therefore, the washing detergent drawer needs to be regularly cleaned from accumulated deposits. Take the
drawer out as follows:
• Pull the drawer out completely.
• Fully press down the lid of the siphon inside the drawer and pull the drawer until you pull it out.
• Wash using water and abrush.
• Remove the deposits accumulated inside the drawer opening without them being allowed to enter the
washing machine.
• Once the drawer is dry, insert it back into the washing machine in the reverse sequence here described.

EN - 18
09/2013Copyright © 2013, Fast ČR, a. s.
Siphon plug
Take out the washing detergent drawer. Pull out the siphon plug and thoroughly clean o fabric softener
residue. Reinsert the cleaned siphon plug in its place. Check that it is properly inserted. Siphon plug
Washing machine cabinet
Clean the washing machine from the outside using lukewarm water and agentle cleaning agent, which will
not damage the surface coat of the washing machine cabinet. After rinsing with clean water, wipe the washing
machine with asoft and dry wiping cloth.
Drum
Do not leave any metal items such as pins, paper clips or coins inside the washing machine. These items can
cause rusty stains on the drum. If you wish to remove these stains, use acleaning agent not containing chloride
and follow the instructions of the cleaning agent'smanufacturer. Never use steel wool used for dishes, or any
other similar abrasive items to clean rusty stains.
Removing scale deposits from the washing machine
We recommend the use of acommonly available scale remover and to follow the instructions printed on the
packaging.
WARNING:
Scale removal mixtures contain acids and may cause discolouration of your laundry and may have
anegative eect on your washing machine.