philippi TWO magic User manual

TWO magic clock
Instruction Manual
Brief introduction: your new PHILIPPI appliance includes two
parts, main part with operation buttons and subordinate
one without buttons. When both parts are put together and
in a horizontal line, it is displayed the time no matter the
subordinate unit at left or right side of main unit. Once you
separate them, the main unit displays the humidity and the
subordinate displays the temperature. Both units work with
upper and lower turnover.
Functions:
Your PHILIPPI appliance has following function buttons:
- MODE, SET, UP, DOWN
- Time display: displays hour and minute, 12/24h switchover
- Alarm function: alarm sound lasts for 1 minute
- Snooze function
- Date function, date range from year 2000 to year 2099
- Countdown scope: 99:59 ~ 00:00
- Sound controlled blue LED backlight, the light would be on for
10 seconds
- Temperature scope: 0°C ~ 50°C (32°F ~ 122°F), resolution:
1, tolerance: +/-1°C
- Humidity scope: 20% ~ 95%, resolution: 1%, tolerance:
+/-5%
- Powered by: AAA * 4 (one set included)
Basic operation
1. Insert the batteries, control sound is heard, default time
display 12:00 AM, default date Jan. 01, 2013.
- Press MODE to check the time, date, alarm, timer, humidity
and temperature.
2. At any mode except humidity and temperature display mode,
press SET to enter setting.
3. During setting, press UP or DOWN to set the values, press
and hold UP or DOWN to increase or decrease quickly.
4. Time mode, press SET to enter time setting, at normal time
display mode, press UP or DOWN to switch 12/24 hr.
5. At date mode, press SET to set year, month and day.
6. At alarm mode, press UP or DOWN to turn on or off the
alarm, when alarm turns on, the alarm symbol () displayed
at any mode, when alarm turned off, the symbol disappears.
When the alarm time is off, it alarms for 1 minute, during
alarming, press any button to stop. No matter whether the
units are put together or separated, when the alarm time is
off, alarm lasts for 1 minute.

7. Countdown timer scope: 99:59 ~ 00:00
8. LED backlight turns on for 10 seconds when both parts of
your PHILIPPI appliance are put together, when separated,
when any button is pressed or when countdown timer
reaches 00:00.
9. Sound controlled LED backlight.
Operation instruction:
1. Mode switch
Put both main unit and subordinate unit of your PHILIPPI
appliance together in a horizontal line, press MODE to switch
in sequence: time mode →date mode →alarm mode →timer
mode →temperature and humidity mode.
When main unit and subordinate unit are separated, only
humidity and temperature are displayed, press the MODE, only
the display of main unit changes.
2. Time mode
Put both main unit and subordinate unit of your PHILIPPI
appliance together in a horizontal line, display the default time
12:00 (AM) at 12h system.
At time display mode, press SET to enter time setting in
sequence: hour →minute →circularly.
Press UP or DOWN to set the values, press and hold UP or
DOWN to increase or decrease quickly.
At setting mode, press MODE or without any button operation
in 15 seconds quit from the setting and display the time.
With 12h display, the PM would appear on the display.
Time setting scope: hour from 1 to 12 or from 0 to 23, second
from 00 to 59, when the minute changed, the second would be 0.
3. Date mode
At time display mode, press MODE to enter date display mode,
the default date display is Jan. 01, 2013
At date display mode, press SET to set the date in sequence:
year →month →day, during setting press UP or DOWN to set the
values, press and hold UP or DOWN to increase or decrease quickly.
When month and day displayed, press UP or DOWN to check
the year, press again to go back to the month and day are
displayed.
Setting scope: month from Jan. to Dec., day from 1 to 31, year
from 2000 to 2099.
When year is displayed, Y is displayed, when month and day is
displayed, M and D is displayed.

At setting mode, press MODE or without any button operation
in 15 seconds quit from the setting and display the set date.
4. Alarm mode
At time display mode, press MODE twice to enter alarm mode,
default alarm time 12:00 AM, with AL on the display.
At alarm mode, press SET to set the alarm and alarm symbol
() displayed.
At alarm mode, press UP or DOWN to turn on or off the alarm.
Even the alarm time is set but the alarm is not turn on without
() displayed, then alarm does not work.
At alarm mode, press SET to set the date in sequence: hour →
minute, during setting press UP or DOWN to set the values,
press and hold UP or DOWN to increase or decrease quickly.
No matter the main part and subordinate part of your PHILIPPI
appliance are put together or separated, when alarm time is off,
it alarms for 1 minute with backlight on for 10 seconds.
When it alarms, press SET to turn on snooze, press MODE/UP/
DOWN to stop the alarm and not turn on the snooze.
When both parts of your PHILIPPI appliance are put separately,
when it alarms, put them together to turn on snooze with
symbol (zz) displayed, the interval is 5 minutes, when the snooze
time is off, the symbol (zz)disappears but alarm symbol ()
kept, the snooze could be repeated endlessly.
When they are put together, when it alarms, separate them
to turn on snooze with symbol (zz) displayed, the interval is 5
minutes, when the snooze time is off, the symbol (zz) disappears
but alarm symbol () kept, the snooze could be repeated
endlessly.
5. Timer mode
Press MODE three times to enter timer mode, the symbol () is
displayed, the default timer is 00:00 (minute:second)
At timer mode, press SET to enter timer setting mode, press
UP or DOWN to adjust the values, press and hold UP or DOWN
to increase or decrease the values quickly. The setting scope:
minute from 0 to 99, the second from 0 to 59.
At setting mode, press MODE to quit.
At timer mode, press UP to start and press UP again to stop, this
operation could be endlessly.
When it is stopped temporarily press SET to enter timer-setting
mode; press DOWN to go back to the set values.
When it is timing, press MODE to exit the timer display and go
to other displays but timer is still working. At any mode when

symbol () is displayed, it means the timer is working.
When timer is off and it alarms, the symbol () disappears from
the display, but at timer display mode when timer is out (00:00
displayed) the symbol () would not disappear.
After exit the setting, press UP to start the timer, the set second
is going down when it reaches 00 the set minute goes off.
When main part and subordinate part are put separately, main
part displays humidity, press MODE to enter timer mode, press
SET to set the minute of timer, after set the second would be 00
When main part and subordinate part of your PHILIPPI appliance
are put separately, only minute of timer is displayed, when timer
works the timer symbol () is displayed and twinkling. After they
are put together, time is displayed with symbol (), press MODE
three times to enter timer mode with timer digits displayed.
When timer reaches 00:00, it alarms for 1 minute with backlight
on for 10 seconds, press any key to stop or wait until it turns off
after 1 minute. If main part and subordinate part are separate,
when timer is off, put them together to stop the alarm,
conversely, if they are put together, when timer is off, separate
them to stop the alarm.
6. Temperature and humidity mode
After power on, it test the temperature automatically, the
temperature scope 0°C ~ 50°C (32°F ~ 122°F).
Test period: 30 seconds
At temperature and humidity display mode, press UP or DOWN
to switch the temperature unit.
When temperature is under 0°C, it displays 0°C, when it is
above 50°C, it displays 50°C.
Humidity test cope: 20%~95%, test period: 60 seconds.
When humidity is under 20%, it displays 20%, when it is above
95%, it displays 95%.
7. Backlight function
Whenever put together or separate the main part to subordinate
part of your PHILIPPI appliance, the backlight turns on.
When main part and subordinate part of your PHILIPPI appliance
are put together, when alarm time is off, both backlights are on
for 70 seconds, when they are separately put, when it alarms,
only main part’s backlight is on for 70 seconds.
When main part and subordinate part are put together, when
timer is off, both backlights are on for 70 seconds, when they
are separately put, when it alarms, only main part’s backlight is
on for 70 seconds.
Backlight also sound controlled.

8. Sound controlled function
Button sound or other strong sound could turn on the backlight
for 10 seconds.
When any button is pressed, sound controlled function does
not work.
9. Display picture:
Time display: Temperature and humidity display
Note: In case of dim display or poor responsiveness, please
replace the batteries.

PHILIPPI GmbH · Am Redder 2 · 24558 Ulzburg / Hamburg · Germany
Tel. + 49 (4193) 880 10 0 · Fax + 49 (4193) 880 10 50
www.philippi.com · [email protected]