Philips HearLink HEA6002 User manual

User Guide HEA6002
HearLink
TV Adapter
HearLink
TV Adapter

Warranty certicate
Date: Model:
Warranty period:
Serial no.:
Hearing center

International warranty
Your TV Adapter is covered by an
international limited warranty issued by the
manufacturer for a period of 24 months from
the date of delivery. This limited warranty
covers manufacturing and material defects
in the device itself, but not in accessories
such as batteries, cables, power supplies,
etc. Problems arising from improper/
incorrect handling or care, excessive use,
accidents, repairs made by an unauthorized
party, exposure to corrosive conditions,
damage due to foreign objects entering the
device or incorrect adjustments are NOT
covered by the limited warranty and may
void it. The above warranty does not aect
any legal rights that you might have under
applicable national legislation governing
sale of consumer goods. Your hearing care
professional may have issued a warranty
that goes beyond the clauses of this limited
warranty. Please consult him/her for further
information.
If you need service
Take your TV Adapter to your hearing
care professional, who may be able to
sort out minor problems and adjustments
immediately.

Introduction to this booklet
This booklet guides you on how to use and
maintain your new TV Adapter. Please read
the booklet carefully, including the Warning
section. This will help you to achieve the
full benet of your new TV Adapter.
If you have additional questions about the
use of your TV Adapter, please contact your
hearing care professional.
Manufactured under licence from Dolby
Laboratories. Dolby and the double-D
symbol are registered trademarks of Dolby
Laboratories.

Intended use
The TV Adapter is intended as a wireless
transmitter of sound from a TV or from
other electronic audio devices to hearing
aids.
The TV Adapter is intended to be used by
children (> 36 months) and adults together
with their hearing solution.

Table of contents
Package content 09
TV Adapter overview 10
Installation 12
Placing the TV Adapter 13
Connecting the TV Adapter to
a power outlet 14
Connecting the TV Adapter to the TV 16
Connecting using TOSLINK 18
Connecting using RCA 20
Connecting using mini jack adapter 22
Connecting using SCART 24
Pairing the TV Adapter with your
hearing aids 26
Start TV sound using your hearing aids 28
Turn o TV sound using your
hearing aids 29
Volume control using your hearing aids 30
Start TV sound
using the hearing aid
Remote Control 32

Turn o TV sound using your
Remote Control 33
Volume control using your
Remote Control 34
Mute using your Remote Control 35
More than one user 36
Removing a user/clear pairings 37
Cleaning and maintenance 38
Warnings 39
Technical information 42

09
Package content
The TV Adapter box consists of the
following elements:
Power supply
RCA cable TOSLINK
cable
Mini jack adapter
This booklet
User Guide HEA6002
HearLink
TV Adapter
HearLink
TV Adapter
TV Adapter

10
TV Adapter overview
Mode Power
indicator
TV
indicator
Power on, not paired to
any hearing aids
Pairing complete
(steady light 30 secs)
Power on, not streaming
RCA inserted and
streaming
No RCA/Audio input
TOSLINK inserted and
streaming (digital)
TOSLINK inserted and
streaming (invalid signal)*
Fault condition**
* Try other input connection
** Contact your hearing care professional
No light Blinking
Fading Steady

11
Front view
Power
indicator TV indicator
Back view
Power supply TOSLINK in
TOSLINK out
Mode*
RCA
connector
port left and
right
OUT
IN
R
L
POWER
Setup
* Reserved for future use

12
Installation
Using the TV Adapter for the rst time
Before you can use your hearing aids with
your TV, the TV Adapter must be connected
to a power outlet, connected to the TV and
paired with your hearing aids.
This is a step-by-step guide on how to
install the TV Adapter.

13
Placing the TV Adapter
Place the TV Adapter close to the TV
horizontally, with free line of sight to the
hearing aids.

14
Connecting the TV Adapter
to a power outlet
Start by connecting the TV Adapter to a
power outlet.
Use the power supply from box 1
1. Plug the power cord into the “power”
connector on the TV Adapter (A).
2. Plug the power supply into the mains wall
socket (B).
3. Check that the power is turned on (C);
after a few seconds both indicators will
fade blue to indicate that pairing with
your hearing aids is needed. See page
26.

15
TUO
IN
POWER R
L
1 2
Box 1
C
A
B

16
Connecting the TV Adapter
to the TV
You can connect the TV Adapter to the TV
in four dierent ways.
Connection Page
TOSLINK (either digital stereo PCM or
Dolby®Digital*) 18
RCA audio output (L + R) 20
Mini jack output
(typically headphone output) 22
SCART audio output (L + R) 24
* Dolby and the double-D symbol are registered
trademarks of Dolby Laboratories.
We recommend using TOSLINK.
Please see the following pages for a
solution which ts your TV.

17
L
TUO
IN
R
1 3
2
1 3
L
TUO
IN
R
L
R
Audio
Out
L
TUO
IN
R
1 3
L
R
Audio
Out
L
TUO
IN
R
1 3
RCA (p. 20)TOSLINK (p. 18)
Mini jack (p. 22) SCART (p. 24)

18
Connecting using TOSLINK
1. Use the TOSLINK cable from box no. 3 (A).
2. Remove the plastic cap from the
TOSLINK cable (B).
3. Connect the TOSLINK cable to the
TOSLINK output on your TV/home theater
system (C).
4. Connect the TOSLINK cable to the pink
TOSLINK input (D) on the TV Adapter.
5. The TOSLINK output (E) may be used to
connect other TOSLINK devices such as
external Dolby Decoders and surround
sound systems.
6. Refer to page 26 for pairing of the TV
Adapter with your hearing aid.
It may be necessary to congure your TV,
DVD player or home theater system so
that the correct audio output is available
on the TOSLINK output.

19
L
TUO
IN
R
L
TUO
IN
R
1 3
2
1 3
2
C
DE
Box 3
AB

20
Connecting using RCA
1. Use the RCA cable from box no. 2 (A).
2. Connect the RCA cable to the RCA output
on your TV (B) or home theater system.
(Typically marked “L – R AUDIO OUT” and
found on the TV back or bottom panel.)
3. Connect the RCA cable to the RCA
connectors (C) on the back of the TV
Adapter.
4. Refer to page 26 for pairing of hearing
aids with the TV Adapter.
It may be necessary to congure your
TV so that the correct audio output is
available on the RCA output.