Philips AZ1326/12 User manual

AZ1326
Register your product and get support at
www.philips.com/welcome
EN User manual

1 Important
Safety
a Read these instructions.
bKeep these instructions.
cHeed all warnings.
dFollow all instructions.
eDo not use this apparatus near water.
fClean only with dry cloth.
gDo not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
hDo not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
iFor countries with a polarized mains, do not defeat the
safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the
other.A grounding type plug has two blades and a third
grounding prong.The wide blade or the third prong are
provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement
of the obsolete outlet.
Caution:To prevent electric shock, match the wide blade
of the plug to the wide slot, fully insert.

jProtect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
kOnly use attachments/accessories specified by the
manufacturer.
lUse only with the cart, stand, tripod, bracket, or
table specified by the manufacturer or sold with the
apparatus.When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-
over.
mUnplug this apparatus during lightning storms or when
unused for long periods of time.
nRefer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
oBattery usage CAUTION – To prevent battery leakage
which may result in bodily injury, property damage, or
damage to the unit:

Install all batteries correctly, + and - as marked on
the unit.
Do not mix batteries (old and new or carbon and
alkaline, etc.).
Remove batteries when the unit is not used for a
long time.
pApparatus shall not be exposed to dripping or splashing.
qDo not place any sources of danger on the apparatus
(e.g. liquid filled objects, lighted candles).
rThis product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental
considerations. For disposal or recycling information,
please contact your local authorities or the Electronic
Industries Alliance: www.eiae.org.
Safety-Important notes for users in the U.K.
Mains plug
This apparatus is fitted with an approved 13 Amp plug.To
change a fuse in this type of plug proceed as follows:
aRemove fuse cover and fuse.
bFix new fuse which should be a BS1362 3 Amp,A.S.T.A.
or BSI approved type.
cRefit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 3
Amp. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 3 Amp.
•
•
•

Note:The severed plug must be disposed off to avoid a possible
shock hazard should it be inserted into a 13 Amp socket
elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following
code: blue = neutral (N), brown = live (L).
As these colours may not correspond with the colour markings
identifying the terminals in your plug, proceed as follows:
Connect the blue wire to the terminal marked N or
coloured black.
Connect the brown wire to the terminal marked L or
coloured red.
Do not connect either wire to the earth terminal in the
plug, marked E (or e) or coloured green (or green and
yellow).
Before replacing the plug cover, make certain that the cord grip
is clamped over the sheath of the lead - not simply over the
two wires.
Copyright in the U.K.
Recording and playback of material may require consent. see
Copyright Act 1956 and The performer’s Protection Acts 1958
to 1972.
•
•
•

Warning
Never remove the casing of this CD Soundmachine.
Never lubricate any part of this CD Soundmachine.
Never place this CD Soundmachine on other electrical
equipment.
Keep this CD Soundmachine away from direct sunlight,
naked flames or heat.
Never look into the laser beam inside the CD
Soundmachine.
Ensure that you always have easy access to the power cord,
plug or adaptor to disconnect the CD Soundmachine from
the power.
•
•
•
•
•
•
Notice
This product complies with the radio interference requirements
of the European Community.
This product complies with the requirements of the following
directives and guidelines: 2004/108/EC, 2006/95/EC.
Any changes or modifications made to this device that are not
expressly approved by Philips Consumer Lifestyle may void the
user’s authority to operate the equipment.

The making of unauthorized copies of copy-protected material,
including computer programs, files, broadcasts and sound
recordings, may be an infringement of copyrights and constitute
a criminal offence.This equipment should not be used for such
purposes.
Recording and playback of material might require consent. See
Copyright Act 1956 and The Performer’s Protection Acts 1958
to 1972.
This CD Soundmachine includes this label:

Disposal of your old product
Your product is designed and manufactured with highly quality
material and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to
a product, it means the product is covered by the European
Directive 2002/96/EC.
Please inform yourself about the local separate collection system
for electrical and electronic products.
Please act according to your local rules and do not dispose your
old products with your normal household waste.The correct
disposal of your old product will help prevent potential negative
consequences for the environment and human health.
Environmental information
All unnecessary packaging has been omitted.We have tried
to make the packaging easy to separate into three materials:
cardboard (box), polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can be recycled and
reused if disassembled by a specialized company. Please observe
the local regulations regarding the disposal of packaging materials,
exhausted batteries and old equipment.

2 Your CD Soundmachine Dynamic
Bass Boost
Congratulations on your purchase, and welcome to Philips! To
fully benefit from the support that Philips offers, register your
product at www.Philips.com/welcome.
Introduction
With the CD Soundmachine, you can:
play audio discs
listen to FM/MW radio
program the play sequence of tracks
enhance the sound with the Dynamic Bass Boost feature.
What’s in the box
Check and identify the contents of the package:
CD Soundmachine
AC power cord
User Manual
•
•
•
•
•
•
•

Overview of the main unit
aVOL+/-
Adjust volume level
bMP3 LINK
Socket for connecting an external device
c
•
•
c
e
b
d
a
g
h
f
i
k
d
l
m
jc
e
b
d
a
g
h
f
i
k
d
l
m
j
o
n
o
n

Start or pause CD play
dTUNING /
Tune to radio stations
Select the previous/next track
Search backward/forward
eALBUM/PRESET +/-
For MP3-CDs: skip to the next/previous album in
an MP3-CD
For radio: select a preset station
fTelescopic antenna
Adjust FM reception
gLIFT TO OPEN
Open/close the CD compartment
hMUTE
Mute or restore the volume.
iDBB
Turn the bass enhancement on/off
jSource selector: CD, FM, MW,MP3 LINK
Select CD, FM, MW, or MP3 source
k
Stop CD play
Erase a CD program
lPROG
For MP3-CDs: program tracks and browse the
program
For radio: store preset stations
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

mMODE
Select a play mode: REPEAT or SHUFFLE
nAC MAINS~
Socket for the power cord
oON/OFF
Turn the CD Soundmachine on or off
•
•
•

3 Get started
Caution
Use the controls only as stated in this user manual.
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
•
•
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial
number of your CD Soundmachine.The model number and
serial number are on the bottom of your CD Soundmachine.
Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install batteries
Note
You can use both batteries and AC power as power supply
of this CD Soundmachine.
Batteries are not supplied with the accessories.
•
•
1Open the battery compartment.

2Insert 6 x 1.5V R14/UM-2/C-cell batteries with correct
polarity (+/-) as indicated.
3Close the battery compartment.
6 x 1.5V R-14/UM-2/C-cell6 x 1.5V R-14/UM-2/C-cell

Connect AC power
Warning
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back or
the underside of the CD Soundmachine.
Risk of electric shock! When you unplug the AC adaptor,
always pull the plug from the socket. Never pull the cord.
•
•
Note
Install the unit near the power supply socket and where the
AC power plug can be easily reached.
•
1Connect the power cord to the AC MAINS~ socket on
the CD Soundmachine and to the power supply socket.

To switch the CD Soundmachine off completely,
disconnect the power cord from the power supply
socket.
Tip
To save energy: After use, set the switch to OFF.•
•

4 Use your CD Soundmachine
Play a CD
Note
You cannot play CDs encoded with copyright protection
technologies.
•
You can play commercially available audio CDs:
CD-Recordables (CD-R)
CD-Rewritables (CD-RW)
MP3-CDs
1Switch the source selector to CD.
2Lift the lid of the CD compartment.
3Insert a CD with the printed side facing up.
4Close the CD lid gently.
The total number of tracks is displayed.
5Press to start play.
[]is displayed.
To pause CD play, press .
To resume CD play, press again.
•
•
•
»
»
•
•

To stop CD play, press .
Select a track
1During play, press TUNING /to select a track.
Select an album
For MP3-CDs only.
1During play, press ALBUM/PRESET +/- to select an album.
Find a passage within a track
1During play, press and hold TUNING /.
The CD is played at high speed and with reduced volume.
2Release TUNING /to resume normal play.
Tip
When search reaches the end of the last track, the CD
stops.
•
•
»

Select play modes
Repeat play
You can repeat a track, an MP3 album, a disc, or a program.
[]– Repeat a track
[ALB] – Repeat an album
[ALL] – Repeat an entire CD/program
1During play, press MODE repeatedly until the display
shows the repeat icon.
Repeat a track.
Repeat an album.
Repeat a program.
To stop repeat play, press MODE repeatedly until the
repeat icon is no longer displayed.
•
•
•
•
•
•
•

Shuffle play
You can play all tracks in random order.
1During play, press MODE repeatedly until the display
shows the shuffle icon.
To stop shuffle play, press MODE again.
Program play sequence
You can store up to 20 tracks in the desired sequence.
1In stop mode, press PROG to start to program play
sequence.
[PROG] and [P01] are displayed.
2For MP3-CDs: press ALBUM/PRESET +/- to select an
album.
3Press TUNING /to select a track.
4Press PROG to store the track.
[PROG] and [P02] are displayed.
5Repeat steps 2 to 4 to select and store all tracks.
•
»
»