Philips AZ2010/10 User manual

CD Radio Cassette Recorder AZ 2010
VOLUME
INCREDIBLE
SURROUND
ULTRA BASS
DYNAMIC BASS BOOST
VOLUME
INCREDIBLE
SURROUND
ULTRA BASS
DYNAMIC BASS BOOST
CD SYNCHRO START RECORDING
AZ2010 CDRADIO CASSETTE RECORDER
CD SYNCHRO START RECORDING
AZ2010 CD RADIO CASSETTE RECORDER
OPEN
OPEN
RECORD
PLAY
SEARCH
STOP-OPEN
PAUSE
RECORD
PLAY
SEARCH
STOP-OPEN
PAUSE
• ULTRABASS
BASS REFLEX SPEAKER SYSTEM
DIGITAL TUNER
• ULTRABASS
BASS REFLEX SPEAKER SYSTEM
DIGITAL TUNER
PROG
PROGR
PRESET
STOP
PLAY/
PAUSE
SEARCH
PROG
BAND
CD MODE
PRESET
STOP
PLAY/
PAUSE
SEARCH
PROG
BAND
CD MODE

INDEX
2 2
English
FrançaisEspañol
English ........................................... 4
Français ...................................... 14
Español ....................................... 25
∑
∑................................................. 35
∫Brasil
Garantia.........................................Página 45
µMéxico 2
Garantia....................................Página 46-47
åAustralia
Guarantee .........................................Page 48
ˆNew Zealand
Guarantee .........................................Page 49
Es necesario que lea cuidadosamente su instructivo de manejo.
Descripción: Radio cassette grabadora con CD
Modelo: AZ 2010/01
Alimentación: 110–127/220–240 V; ~50–60 Hz
Consumo: 22 W
Importador: Philips Mexicana, S.A. de C.V.
Domicilio: Norte 45, # 669, Col. Industrial Vallejo
Localidad y Telefono: C.P. 02300 México D.F., Tel. [phone]
Exportador: Philips HK, Ltd.
País de Origen: China
Nº de Serie: ______________________________
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO.
No abrir, riesgo de choque eléctrico
Verifique que el voltaje de alimentación
sea el requerido para su aparato
ATENCIÓN
Para evitar el riesgo de choque eléctrico, no quite la tapa.
En caso de requerir servicio, dirijase al personal calificado.
PRECAUCIÓN - ADVERTENCIA
México n

3
CD SYNCHRO START RECORDING
AZ2010 CD RADIO CASSETTE RECORDER
OPEN
VOLUME
INCREDIBLE
SURROUND
ULTRA BASS
DYNAMIC BASS BOOST
RECORD
PLAY
SEARCH
STOP-OPEN
PAUSE
• ULTRABASS
BASS REFLEX SPEAKER SYSTEM
DIGITAL TUNER
PROGR
PRESET
STOP
PLAY/
PAUSE
SEARCH
PROG
BAND
CD MODE
2345 6 7
89 0! @#$% ^
1

220
240V
110
127V
)* (&
•
•

CONTROLS
4
English
1p3.5 mm stereo headphone socket
Note: – Connecting headphones will switch off
the speakers
2VOLUME - to adjust volume level
3Bass control - to select a more vivid bass
response: OFF, DYNAMIC BASS BOOST,
ULTRA BASS
4INCREDIBLE SURROUND - to create a
phenomenal stereo effect
5Source selector:
OFF/ TAPE, TUNER, CD- to select source of
sound, and also the power OFF` switch
CASSETTE RECORDER:
6PAUSE ;- to interrupt recording or playback
STOP•OPEN 9/- to stop the tape and to
open the cassette
holder
SEARCH 5or 6- to fast wind/rewind the
tape
PLAY 1- to start playback
RECORD 0- to start recording
CD PLAYER
7OPEN - to open/ close the CD door
8PLAY•PAUSE 2; - to start or interrupt
CD play
9STOP 9- to stop CD playback; to erase a CD
programme
0SEARCH ∞or §
CD - to skip or search a passage/ track
backwards or forward
TUNER - to tune (down/up) to stations
!CD MODE - to select a different play mode
@CD Display - to show the CD functions
#Cassette compartment
DIGITAL TUNER
$PROG
CD - to programme tracks and to review the
programme
TUNER- to programme preset tuner stations
%BAND - to select FM/MW waveband
^PRESET 3, 4- to select a preset tuner
station (up, down)
&Battery door - to open the battery
compartment
*Telescopic aerial - to improve FM
reception
(Voltage selector - to select 110-127 V or
220-240 V
)MAINS V~ - socket for mains lead
BACK PANEL
TOP AND FRONT PANEL
Environmental information
All unnecessary packaging material has been omitted. We have done our utmost to make the
packaging easily separable into three mono materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a specialized
company. Please observe the local regulations regarding the disposal of packaging
materials, exhausted batteries and old equipment.

POWER SUPPLY
5
English
Whenever convenient, use the power supply if you want to
conserve battery life. Make sure you remove the plug from the
set and wall socket before inserting batteries.
Batteries (optional)
1. Open the battery compartment and insert six batteries, type
R20, UM1 or D-cells (preferably alkaline) with the correct
polarity as indicated by the “+” and “-” symbols inside the
compartment.
2. Replace the compartment door, making sure the batteries are
firmly and correctly in place. The set is now ready to operate.
Incorrect use of batteries can cause electrolyte leakage and will
corrode the compartment or cause the batteries to burst.
Therefore:
– Do not mix battery types, e.g. alkaline with carbon zinc.
Only use batteries of the same type for the set.
– When inserting new batteries, do not try to mix old
batteries with the new ones.
– Remove the batteries if the set is not to be used for a long
time.
Batteries contain chemical substances, so they should
be disposed of properly
1.
Check if the power voltage as shown on the type plate on
the base of the set, corresponds to your local power
voltage. If it does not, consult your dealer or service
organisation.
2. If your set is equipped with a voltage selector, adjust it so
that it matches with the local power.
3. Connect the mains lead to the MAINS V~ socket and the
wall socket.
– The mains supply is now connected and ready for use.
4. To switch off completely, withdraw the mains lead from the
wall socket.
•Disconnect the mains lead from the wall socket to protect
your set during heavy thunderstorms.
USING THE AC MAINS
Batteries
220
240V
110
127V
•
•
6 x R20•D-CELL•UM-1
220
240V
110
127V
•
•

OPERATION DIGITAL TUNER
6
English
1. Adjust the source selector to your desired sound source:
OFF/ TAPE, TUNER, CD.
2. Adjust the sound using the VOLUME, INCREDIBLE
SURROUND and OFF, DYNAMIC BASS BOOST, ULTRA
BASS controls.
3. To switch off the set, adjust the source selector to OFF/TAPE
position and check that the cassette keys are released.
Note: When the set is switched off the tuner presets will be
retained in the set's memory.
1.
Adjust the source selector to TUNER.
2. Press BAND once or more to select your wave band.
3. To tune to radio stations, press the SEARCH controls ∞or
§ until the frequency in the display starts running, then
release the control.
–Srch appears in the display and the radio automatically
tunes to a station of sufficient reception.
4. Repeat if necessary until you find the desired station.
•To tune a weak transmitter, briefly press ∞or §until
you have found optimum reception or the correct frequency.
– When STEREO appears in the display, you are receiving a
FM-stereo transmitter.
To improve radio reception
• For
FM , pull out the telescopic aerial. Incline and turn the
aerial. Reduce its length if the signal is too strong (very close
to a transmitter).
• For
MW , the set is provided with a built-in aerial so the
telescopic aerial is not needed. Direct the aerial by turning
the whole set.
RADIO RECEPTION
GENERAL OPERATION
VOLUME
INCREDIBLE
SURROUND
ULTRA BASS
DYNAMIC BASS BOOST
SEARCH
STOP-OPEN
PAUSE
FM
AM
TUNER
SWFM
MWLWAM
PROGR
PRESET
PROG
BAND
CD MODE

DIGITAL TUNER CD PLAYER
7
English
1. Tune to your desired station, following steps 1-4 under
‘RADIO RECEPTION’.
™If the frequency is already stored in the memory, the
preset number will be displayed.
2. Press PROG to activate programming.
™PROGRAM flashes in the display.
3. Press the PRESET 4, 3(down/up) to allocate a preset
station number from 1 to 29.
4. Press PROG again to confirm the setting.
5. Repeat steps 1-4 to store all other presets.
• You can clear a preset number by storing another frequency
in its place.
To deactivate programming mode
If during programming you decide not to programme a station,
adjust the OFF/ TAPE, TUNER, CD slider to CD or OFF/TAPE.
Tuning to preset stations
Press the PRESET 4, 3control (down, up) until the desired
number is shown.
– : CD door open
–
Total track number and playing time: in stop mode
–no d1SC: when no disc inserted/ error in CD operation or
with the CD (see Troubleshooting)
–
Current track number and elapsed playing time: during CD
playback.
–
Elapsed playing time freezes and flashes: in PAUSE position.
–SHUFFLE/REPEAT (ALL)
modes: when the respective mode
is activated
–PROGRAM:programme mode active
–:appears briefly and the selected track number (1 -20)
when you programme
–FULL:programme memory full
–:when you cancel a CD programme
–:you press PROG but no track has been selected
CD DISPLAY INDICATION
PROGRAMMING RADIO STATIONS
STEREO
FM
TUNER
CD
CD PROGRAM
CD
CD PROGRAM
REPEAT ALL
SHUFFLE
PROGR
PRESET
PROG
BAND
CD MODE

CD PLAYER
8
English
1. Set the source selector to CD.
2. To open the CD door, press OPEN on the CD door.
3. Insert a CD with the printed side facing up and press the CD
door gently to close.
4. Press PLAY•PAUSE 2; to start playback.
5. Adjust the sound using the VOLUME, INCREDIBLE
SURROUND and BASS controls.
6. To interrupt playback press PLAY•PAUSE 2;. To resume,
press PLAY•PAUSE 2; again
7. To stop CD play, press STOP 9.
8. To switch off the set, adjust the source selector to OFF/
TAPE position (with the cassette keys released)
Note: CD playback will also stop when:
– you press the CD door open;
– the source selector is in OFF/ TAPE/ TUNER position;
– the CD has reached to the end.
During playback, you can use the SEARCH keys to select a
particular track.
1. Press SEARCH §once for the next track, or press
repeatedly until the desired track number appears in the
display.
Press SEARCH ∞ once to return to the beginning of a
current track.
Press SEARCH ∞ more than once for a previous track.
2. If you have selected a track number in the stop or pause
position, you will need to press PLAY•PAUSE 2; to start
playback.
Finding a passage within a track
1. Press and hold down SEARCH ∞or §.
– The CD is played at high speed and low volume.
2. When you recognize the passage you want, release the
SEARCH controls.
SELECTING A DIFFERENT TRACK
PLAYING A CD
CD SYNCHRO START RECORDING
AZ2010 CD RADIO CASSETTE RECORDER
OPEN
RECORD
PLAY
CH
PROGR
STOP
PLAY/
PAUSE
SEARCH
PR
CD MODE
PROGR
STOP
PLAY/
PAUSE
SEARCH
PR
CD MODE

CD PLAYER
9
English
The CD MODE button allows you to select 4 different play
modes. The modes can be selected or changed during playback.
SHUFFLE - All tracks are played in random order.
SHUFFLE REPEAT ALL - Repeats the entire CD or programme
in random order.
REPEAT - Plays the current track continuously.
REPEAT ALL - Repeats the entire CD or programme
1. During playback or in the STOP position, select your play
mode by pressing CD MODE once or more until the desired
play mode appears in the display.
–You can use SEARCH ∞or §to skip tracks during CD
MODE playback.
2. To return to normal playback press CD MODE until the various
SHUFFLE/ REPEAT modes are no longer shown in the display.
–You can also press STOP 9to quit the play mode.
You may store up to 20 tracks in the desired sequence. If you
like, store any track more than once.
1. In the STOP position, press SEARCH ∞or § for your
desired track.
2. As soon as your chosen track number is displayed, press
PROG once to store the track.
– The display will show ‘ ’ briefly and ‘PROGRAM’,
followed by your selected track number.
3. Repeat steps 1. and 2. to select and store all your desired
tracks.
To review your set programme
1. In the stop position, press and hold down PROG for one
second or more.
– The display will show in sequence all your desired tracks.
2. Start playback of your programme by pressing
PLAY•PAUSE 2;.
Erasing a programmme
You can erase the contents of the memory by:
– pressing the CD door open;
– moving the source selector position;
– pressing STOP 9twice during playback / in stop position
• The display will show ‘ ’ briefly before the programme
is cancelled.
PROGRAMMING TRACK NUMBERS
CD MODE: SHUFFLE & REPEAT
PROGR
STOP
PLAY/
PAUSE
SEARCH
PR
CD MODE
PROGR
STOP
PLAY/
PAUSE
SEARCH
PR
CD MODE
CD PROGRAM

CASSETTE RECORDER RECORDING
10
English
1. Set the source selector to TAPE.
2. Press STOP•OPEN 9/to open the cassette holder and
insert a cassette.
3. Close the cassette holder.
4. Press PLAY 1to start playback.
5. Adjust the sound using the VOLUME, INCREDIBLE
SURROUND and BASS controls
6. To interrupt playback press PAUSE ;. To resume, press the
key again.
7. By pressing 5or 6,fast winding of the tape is possible in
both directions.To stop fast winding, press STOP•OPEN 9/.
8. To stop the tape, press STOP•OPEN 9/.
– The keys are automatically released at the end of the tape,
except if PAUSE ;has been activated.
9. With the source selector in OFF/ TAPE position, the set is
switched off when all the cassette keys are released.
• Recording is permissible insofar as copyright or other rights
of third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC II) or
METAL (IEC IV) type cassettes. For recording you should use
NORMAL type cassettes (IEC I) on which the tabs have not
been broken.
• The recording level is set automatically. Altering the
VOLUME, INCREDIBLE SURROUND and BASS controls
will not affect the recording in progress.
• At the very beginning and end of the tape, no recording will
take place during the 7 seconds, when the leader tape
passes the recorder heads.
• To protect a tape from accidental erasure have the tape in
front of you and break out the left tab. Recording on this side
is no longer possible. To record over this side again, cover
the tabs with a piece of adhesive tape.
General information on recording
PLAYING A CASSETTE
RECORD
PLAY
SEARCH
STOP-OPEN
PAUSE
P
PLAY/
PAUSE
VOLUME
INCREDIBLE
SURROUND
ULTRA BASS
DYNAMIC BASS BOOST
SEARCH
STOP-OPEN
PAUSE
1

RECORDING
11
English
1. Set the source selector to CD.
2. Insert a CD and if desired, programme track numbers.
3. Press STOP•OPEN 9/to open the cassette holder.
Insert a blank tape.
4. Close the cassette holder.
5. Press RECORD 0to start recording.
– Playing of the CD programme starts automatically from the
beginning of the programme.
It is not necessary to start the
CD player separately.
6.
For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ;again.
7. To stop recording press STOP•OPEN 9/.
To select and record a particular passage within a track
1. During playback, press and hold down the SEARCH control
∞or §to find your passage.
2. Press PLAY•PAUSE 2; to put the CD player on pause at the
selected passage.
– Recording will begin from this exact point in the track when
you press RECORD 0.
1. Set the source selector to TUNER.
2. Tune to the desired radio station (see RADIO RECEPTION).
3. Press STOP•OPEN 9/to open the cassette holder.
Insert a blank tape.
4. Close the cassette holder.
5. Press RECORD 0to start recording.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ;again.
7. To stop recording, press STOP•OPEN 9/.
RECORDING FROM THE RADIO
SYNCHRO START CD RECORDING
PROGR
STOP
PLAY/
PAUSE
SEARCH
P
CD MODE
VOLUME
INCREDIBLE
SURROUND
ULTRA BASS
DYNAMIC BASS BOOST
SEARCH
STOP-OPEN
PAUSE
RECORD
PLAY
SEARCH
STOP-OPEN
PAUSE
P
PLAY/
PAUSE
VOLUME
INCREDIBLE
SURROUND
ULTRA BASS
DYNAMIC BASS BOOST
SEARCH
STOP-OPEN
PAUSE

MAINTENANCE
12
English
• Place the set on a hard and flat surface so that the system does not tilt.
• Do not expose the set, CDs, batteries or cassettes to humidity,
rain, sand or excessive heat caused by heating equipment or
direct sunlight.
• Do not cover the set. Adequate ventilation with a minimum
gap of 15 cms between the ventilation holes and surrounding
surfaces is necessary to prevent heat build-up.
• The mechanical parts of the set contain self-lubricating
bearings and must not be oiled or lubricated.
• To clean the set, use a soft, slightly dampened chamois
leather. Do not use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may harm the
housing.
To ensure a good recording and playback of the tape deck, clean
parts A,Band Cshow in the diagram below, after approx. 50
hours of operation, or on average once a month. Use a cotton bud
slightly moistened with alcohol or a special head cleaning fluid to
clean both decks.
1. Open the cassette holder by pressing STOP•OPEN 9/.
2. Press PLAY 1and clean the rubber pressure rollers C.
3. Press PAUSE ;and clean the magnetic heads Aand also the
capstan B.
4. After cleaning, press STOP•OPEN 9/.
Cleaning of the heads can also be done by playing a cleaning
cassette through once.
• The lens of the CD player should
never be touched .
• Sudden changes in the surrounding temperature can cause
condensation to form and the lens of your CD player to cloud
over. Playing a CD is then not possible. Do not attempt to clean
the lens but leave the set in a warm environment until the
moisture evaporates.
• Use only Digital Audio CDs
• To take a CD out of its box, press the centre spindle while
lifting the CD. Always pick up the CD by the edge and replace
the CD back in its box after use to avoid scratching and dust.
• To clean the CD, wipe in a straight line from the centre
towards the edge using a soft, lint-free cloth. Do not use
cleaning agents as they may damage the disc.
•
Never write on a CD or attach stickers to it.
CD PLAYER AND CD HANDLING
TAPE DECK MAINTENANCE
PRECAUTIONS & GENERAL MAINTENANCE
X
A A B C

13
English
TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set for repair. If you are
unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances
should you try to repair the set yourself, as this would invalidate the guarantee
PROBLEM
– POSSIBLE CAUSE
• REMEDY
No sound/power
– VOLUME is not adjusted
• Adjust the VOLUME
– Headphones are connected
• Disconnect headphones
– Mains lead not securely connected
• Connect the AC mains lead properly
– Batteries exhausted/ incorrectly inserted
• Insert fresh batteries/ batteries correctly
CD playback sounds distorted at maximum
level
– Original CD pre-recorded at very high sound
level
• Reduce volume and/or deactivate any added
sound features e.g. bass control
Display does not function properly/ No
reaction to operation of any of the controls
– Electrostatic discharge
• Switch off set, disconnect the mains plug
and reconnect after a few seconds
CD playback does not work
– CD is badly scratched or dirty.
• Replace or clean the CD, see Maintenance.
– Laser lens steamed up
• Wait until lens has acclimatized
The CD skips tracks
– CD is damaged or dirty.
• Replace or clean the CD
– SHUFFLE or a programme is active.
• Quit SHUFFLE/PROGRAM mode(s)
Poor cassette sound quality
– Dust and dirt on the heads, etc.
• Clean deck parts etc., see Maintenance
– Use of incompatible cassette types (METAL
or CHROME)
• Only use NORMAL (IEC I) for recording
Recording does not work
– Cassette tab(s) may be broken out
• Apply a piece of adhesive tape over the
missing tab space
This product complies with the radio interference requirements
of the European Community
The type plate is located on the bottom of the set.