Philips 8FF3WMI/05 User manual

1
2
3
Quick start guide
8FF3WMI
Connect
Setup
Enjoy
EN
PhotoFrame

What you also need
What’s in the box
Philips Wireless Digital
PhotoFrame
AC power socket
Quick Start Guide
1
2
3
Quick start guide
8FF3WMI
Connect
Setup
Enjoy
PhotoFrame
Digital User Manual
(with Philips PhotoFrame Manager
software and user manual)
AC-DC power adaptor
USB cable
AC
Memory card/USB
Stand
Wireless Router Computer

1Connect
Connect the power
Insert a memory card or a USB flash drive.
• Compact Flash type I
• Secure Digital (SD)
• Secure Digital (SDHC)
• Multimedia Card
• xD card
• Memory Stick
• Memory Stick Pro
• Memory Stick Duo
• Memory Stick Pro Duo
• USB flash drive
B
Install the stand
AInsert a storage device C
1Insert the stand into the PhotoFrame.
1 Connect the power cord to the PhotoFrame.
2
Connect the power cord to a power supply
socket.
2 Turn the stand clockwise 45 degrees to
lock it to the PhotoFrame firmly.

Setup
Turn on the PhotoFrame
Set up wireless connection
Press and hold for more than 1 second.
»
For the first time use
Language selection screen is displayed.
A
B
2
»
For any other time use
The main menu is displayed.
CCaution
We recommend not to connect Philips
Wireless PhotoFrame to an open public
network (instead of a secure home network)
to protect the content on the PhotoFrame
from possibly being explored, modified, or
deleted undesirably.
You can wirelessly connect the PhotoFrame to
a PC/Mac or the Internet to share photos in
one of the 3 methods:
• Manually
• Using WPS button (Suggested)
• Using a WindowsVista PC (For details, see
User Manual in the supplied CD-ROM.)
ENote
What you need:
• A wireless router
• Broadband Internet access
Control buttons
:Turn on/off the PhotoFrame
: Go back to the upper menu
3 / 4 / 1 / 2Navigation buttons:
Select the previous/next/right/left item
OK : confirm a selection
: Menu button

1Press the WPS button on the PhotoFrame.
2Within 2 minutes, press the WPS button on
the router.
»
If wireless network setup is complete, a
confirmation message is displayed.
3Press OK to confirm.
»
If wireless connection is set up, is
displayed on the top-right corner of the
PhotoFrame.
4Share PC photos for wireless display.
WPS
ENote
What you need:
• A wireless router that isWPS-enabled
• Broadband Internet access
Setup
2
Set up wireless connection manually
AOn the PC:
1Check the settings of the wireless network.
2Record the network name (SSID) and
security key for the network.
BOn the PhotoFrame:
1In the main menu, select [Settings], then
press OK to confirm.
2Select [Installation] > [Network] >
[Wireless] > [Use manual
configuration], then press OK to confirm.
Set up wireless connection with WPS-
enabled router
3Select the SSID for the network, then press
OK to confirm.
5
When the security key is complete, select
[Enter], then press OK to confirm.
»
If wireless connection is set up, is
displayed on the top-right corner of the
PhotoFrame.
6 Share PC photos for wireless display.
4To enter the security key to connect to
the network, select an alphabet/number,
then press OK to confirm.

Share PC photos for wireless
display with Windows Media
Player 11
C
5Click [Add].
6Select a photo folder to be added to
Windows Media Player 11, then click [OK]
to confirm.
7Click [OK] again.
8Enable access to shared photos with
Windows Media Player 11.
BEnable access to shared photos
1Open Windows Media Player 11.
2Click [Library].
3Select [Media Sharing ...] from the
dropdown menu.
4Select [Share my media], then click [OK]
to confirm.
5Click [Settings].
6Select [Pictures] under [Media tpyes:],
choose [All ratings] under [Parental
ratings], then click [OK] to confirm.
7Select the PhotoFrame, then click [Allow].
Setup
2
The PhotoFrame only supports JPEG photos.
ENote
• Ensure that Windows Media Player 11 is set
up on your PC.
• Ensure that the PhotoFrame and the PC are
connected to the same network.
ASelect photos on PC to share
1Open Windows Media Player 11.
2Click [Library].
3Select [Add to Library ...] from the
drop-down menu.
4Select [My personal folders] under
[Select folders to the monitor], then click
[Advanced Options>>].
8Click [OK] to confirm.
9On the PhotoFrame, display photos in the
shared folder on a PC on a home network.
ETip
For details on how to set a wireless sharing
center, see User Manual in the supplied
CD-ROM.

Setup
2
Load an RSS feed to the
PhotoFrame
D
The PhotoFrame only supports JPEG photos.
RSS feeds from normal blog do not work
properly on the PhotoFrame. You can
download RSS feeds from some popular
photo web sites, for example::
• www.smugmug.com
• www.flickr.com
• picasaweb.google.com
ENote
• Ensure that Philips PhotoFrame Manager is
set up on your PC.
• Ensure that the PhotoFrame and the PC are
connected to the Internet.
• Ensure that Broadband Internet access is
available.
AOn the PC:
1
Search the RSS photos on the Internet with
a web browser.
2Click [Start] > [PhotoFrame Manger]
to start Philips PhotoFrame Manager.
2Click the +symbol on the [RSS Feed]
panel to add an RSS feed.
3Enter [Category] and [Name] of the RSS
feed.
4Drag and drop (or copy) the RSS icon
to the [Address] field, then click [OK] to
confirm.
5On the PhotoFrame, display RSS photos
posted online.
BOn Philips PhotoFrame Manager:
1
Click the [RSS Feed] panel.

1In the main menu, select [PhotoFrame],
then press OK to confirm.
2Select a photo source, then press OK to
confirm.
3Select an album, then press OK to confirm.
ETip
Only JPEG photos can be displayed on the
PhotoFrame.
Display photos on the
PhotoFrame/storage device
Enjoy
3
1In the main menu, select [Shared], then
press OK to confirm.
2Select [Network Servers], then press OK
to confirm.
3Select an access point, then press OK to
confirm.
4Select a shared photo folder from the list,
then press OK to confirm.
Display streaming photos on
shared folders on a home
network
B
1In the main menu, select [Online], then
press OK to confirm.
2Select an RSS feed, then press OK to
confirm.
3Select an album, then press OK to confirm.
ETip
• The PhotoFrame only supports JPEG photos.
The RSS feed from normal blog does not
work properly on the PhotoFrame.
• An RSS feed refreshes frequently (usually at
an interval of an hour) online.
Display Internet photos with
the PhotoFrame
A
C

Enjoy
3
1In the main menu, select [Settings], then
press OK to confirm.
2Select [Slideshow], then press OK to
confirm.
3Select [Transition Effect], then press OK
to confirm.
4Select [Collage], then press OK to confirm.
5Select a collage format, then press OK to
confirm.
• To stop collage display, select [Settings] >
[Slideshow] > [Transition Effect] > [No
effect], then press OK to confirm.
Display collage photos on the
PhotoFrame
1In the main menu, select [PhotoFrame]
> a photo source, then press OK to
confirm.
2 Select an album, then press 1 (Right) to
access the thumbnail mode.
3Select a photo, then press to access
Photo Options.
»
Then you can select an option from the list
to edit photos:
• Rotate
• Effect
• Rename
• Copy
• Move
• Delete
Edit Photos
D
E
You can display photos in the correct
orientation depending the horizontal/vertical
orientation of the PhotoFrame.
1In the main menu, select [Settings], then
press OK to confirm.
2 Select [Installation], then press OK to
confirm.
3Select [Auto Tilt], then press OK to
confirm.
4Select [On], then press OK to confirm.
Set auto orientation
F

Enjoy
3
You can adjust the brightness sensor for
the PhotoFrame to turn on or off the display
according to the brightness of environment.
1In the main menu, select [Settings], then
press OK to confirm.
2Select [Installation], then press OK to
confirm.
3Select [SmartPower Pro], then press OK
to confirm.
4Select [Screen On-Sensor] / [Screen
Off-Sensor], then press 1 (Right).
5
Press 3 / 4 to adjust brightness sensor,
then press OK to confirm.
6
Select [Auto Screen On/Off], then press
OK to confirm.
7Select [Auto Sensor], then press OK to
confirm.
Select display auto on/off by
brightness sensor
ETip
• When the ambient light reaches the set
auto on/off level and lasts 15 seconds, the
Auto Sensor function takes effect.
• If the auto-on brightness level is set too
close with the auto-off brightness level,
the display Auto on/off function may not
work.
With SmartPower function on the
PhotoFrame, you can configure the time for
the PhotoFrame to turn on or off the display
automatically.
1In the main menu, select [Settings], then
press OK to confirm.
2Select [Installation], then press OK to
confirm.
3Select [SmartPower Pro], then press OK
to confirm.
4Select [Screen On-Timer] / [Screen
Off-Timer], then press 1 (Right).
5Press 3 / 4 / 1 / 2to set time, then press
OK to confirm.
6Select [Auto Screen On/Off] and press
OK to confirm.
7Select [Timer], then press OK to confirm.
Select display auto on/off by
time
G
H

Welcome to Philips!
Register your product and get support at
www.philips.com/welcome
Is the LCD screen
touch-enabled?
Why does not the
PhotoFrame go into auto-
off status after I set it?
Can I use the PhotoFrame
during its display auto-off
periods?
The Digital PhotoFrame is
ON but the system does
not respond anymore!
The Digital PhotoFrame
does not show some of my
photos.
Why I can not save the
RSS photos shown on my
Photoframe ?
Can I increase the memory
size to store more
pictures on the
PhotoFrame?
Why cannot I connect the
wireless PhotoFrame?
The LCD screen is not touch-enabled. Use the buttons on the back
to control the PhotoFrame.
• Ensure that you set the current time, auto-off time, and auto-on
time correctly. The PhotoFrame automatically turns off its display
exactly at the auto-off time. If the time has already passed for the
day, it starts to enter auto-off status at the specified time from the
next day.
• Ensure that you adjust brightness sensor correctly. If the auto-on
level is too close to the auto-off level, this function may not take
effect.
Yes. Press any control button to bring the system back to ON status;
then, you can use the PhotoFrame.
Ensure that the PhotoFrame is properly powered. Then, use a pin
to trigger the RESET button located on the back to restore the
PhotoFrame.
The PhotoFrame only supports JPEG photos. Ensure that these JPEG
photos are not damaged.
The PhotoFrame does not save RSS photos online for the online
service and network streaming resources normally have copyright.
No. The internal memory of the PhotoFrame is fixed and cannot be
expanded. However, you could switch between different photos by
using different storage devices on the PhotoFrame.
Make sure that the Internet connection and wireless router are
functional.
Make sure that the SSID and password of the Wi-Fi network are
correct.
Make sure that you have at least 2 available IP addresses (one for
the PC, one for the PhotoFrame).The PC and PhotoFrame cannot
share the same IP address.To get more than 2 available IP addresses,
you need a Wi-Fi router which has capability to assign multiple IP
addresses.
Problem Tip
Frequently asked questions

© Royal Philips Electronics N.V. 2008
All rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Printed in China PDCC-2008