Charging
-
- when the motor stops or starts running slower
1 Fully charge the shaver and then use it normally until the battery is
completely empty. Repeat this process two more times. If you optimise
the battery capacity in this way, you can also charge the shaver in
between shaves, even if the battery is not completely empty yet.
one cordless shave.
Charging with the adapter
1 Put the appliance plug in the shaver.
2 Put the mains plug in the wall socket.
Note: Make sure the shaver is switched off.
,The charging light goes on.
,HQ6996, HQ6990, HQ6986: Charge the shaver for at least 1 hour,
but not more than 24 hours.
,HQ6976, HQ6950, HQ6947, HQ6927, HQ6926, HQ6925, HQ6923:
Charge the shaver for at least 8 hours, but not more than 24 hours.
The charging light lights up continuously as long as the appliance is
connected to the mains.
Note: Do not leave the shaver connected to the mains continuously.
Note:You can also shave without charging. Simply connect the shaver to the mains.
3 Remove the mains plug from the wall socket and pull the appliance
plug out of the shaver when the battery is fully charged.
Using the appliance
the mains but also without a cord.
the mains.
1 Put the appliance plug in the shaver.
2 Put the mains plug in the wall socket.
ENGLISH 5
