Philips S9721/41 User manual

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Philips Shaver Series 9000
Wet&Dry S9721/41 o cerca il tuo prodotto tra le migliori offerte di Cura della Persona

20
19
21
23 24
22
4
1
2
3
5
6
7
17
18
25
26
27
29
9
10
12
11
13
14
15
16
28
8

empty page before TOC

English 6
Deutsch 41
Français 80
Italiano 119

English
Contents
Introduction_______________________________________________________ 7
Important safety information_____________________________________ 7
Danger____________________________________________________________ 7
Warning___________________________________________________________ 8
Caution____________________________________________________________ 9
Electromagnetic fields (EMF)_____________________________________ 11
General____________________________________________________________ 11
General description (Fig. 1)_______________________________________ 11
The display________________________________________________________ 12
Personal comfort settings________________________________________ 12
Charging___________________________________________________________ 13
Battery fully charged______________________________________________ 13
Battery low________________________________________________________ 13
Remaining battery charge________________________________________ 13
Cleaning reminder________________________________________________ 14
Travel lock_________________________________________________________ 14
Replacement reminder___________________________________________ 14
Notification symbol_______________________________________________ 15
Charging___________________________________________________________ 15
Charging with the supply unit____________________________________ 16
Charging in the SmartClean system (specific types only)_______ 16
Using the appliance______________________________________________ 17
Switching the appliance on and off______________________________ 17
Shaving____________________________________________________________ 17
Using the click-on attachments__________________________________ 19
Cleaning and maintenance_______________________________________ 23
Cleaning the shaver in the SmartClean system__________________ 23
Cleaning the shaver under the tap_______________________________ 27
Thorough cleaning________________________________________________ 29
Cleaning the click-on attachment________________________________ 31
Storage____________________________________________________________ 33
6English

Replacement______________________________________________________ 34
Replacing the shaving heads_____________________________________ 34
Replacing the cleansing brush attachment______________________ 35
Ordering accessories_____________________________________________ 35
Recycling__________________________________________________________ 35
Removing the rechargeable shaver battery_____________________ 36
Warranty and support____________________________________________ 37
Warranty restrictions______________________________________________ 37
Troubleshooting__________________________________________________ 37
Shaver_____________________________________________________________ 37
SmartClean _______________________________________________________ 39
Introduction
Congratulations on your purchase and welcome to
Philips! To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.
Please read this user manual, as it contains
information about the features of this shaver as
well as some tips to make shaving easier and more
enjoyable.
Important safety information
Read this important information carefully before
you use the appliance and its accessories and save
it for future reference. The accessories supplied
may vary for different products.
Danger
- Keep the supply unit dry.
7
English

Warning
- To charge the battery, only use the
detachable supply unit (type HQ8505)
provided with the appliance.
- The supply unit contains a transformer. Do
not cut off the supply unit to replace it with
another plug, as this causes a hazardous
situation.
- This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. Children shall not play
with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
- Always unplug the shaver before you clean
it under the tap.
- Always check the appliance before you use
it. Do not use the appliance if it is damaged,
as this may cause injury. Always replace a
damaged part with one of the original type.
8English

- Do not open the appliance to replace the
rechargeable battery.
Caution
- Never immerse the cleaning
system or the charging stand in
water and do not rinse it under
the tap.
- Never use water hotter than
60°C to rinse the shaver.
- Only use this appliance for its
intended purpose as shown in
the user manual.
- For hygienic reasons, the
appliance should only be used
by one person.
- Never use compressed air,
scouring pads, abrasive
cleaning agents or aggressive
liquids such as petrol or
acetone to clean the appliance.
- If your shaver comes with a
cleaning system, always use the
original Philips cleaning fluid
(cartridge or bottle, depending
on the type of cleaning system).
9
English

- Always place the cleaning
system on a stable, level and
horizontal surface to prevent
leakage.
- If your cleaning system uses a
cleaning cartridge, always make
sure the cartridge compartment
is closed before you use the
cleaning system to clean or
charge the shaver.
- When the cleaning system is
ready for use, do not move it to
prevent leakage of cleaning
fluid.
- Water may drip from the socket
at the bottom of the shaver
when you rinse it. This is normal
and not dangerous because all
electronics are enclosed in a
sealed power unit inside the
shaver.
10 English

- Do not use the supply unit in or
near wall sockets that contain
an electric air freshener to
prevent irreparable damage to
the supply unit.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
General
- This shaver is waterproof. It is suitable for use in
the bath or shower and for cleaning under the
tap. For safety reasons, the shaver can
therefore only be used without cord.
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
General description (Fig. 1)
1 Protection cap for cleansing brush attachment
2 Click-on cleansing brush attachment
3 Attachment base
4 Comb for beard styler attachment
5 Click-on beard styler attachment
6 Click-on shaving unit
7 On/off button
8 Socket for small plug
9 Notification symbol
10 Replacement reminder
11 Travel lock symbol
12 Cleaning reminder
13 Charge symbol
14 Battery charge percentage
11
English

15 Personal comfort settings bar
16 + and - buttons for personal comfort settings
17 SmartClean system
18 Cap of SmartClean system
19 On/off button
20 Replacement symbol
21 Rinsing symbol
22 Drying symbol
23 Ready symbol
24 Charge symbol
25 Cleaning cartridge for SmartClean system
26 Supply unit
27 Small plug
28 Cleaning brush
29 Pouch
The display
Note: Before you use the shaver for the first time,
remove the protective foil from the display.
Personal comfort settings
The appliance has a feature that allows you to
personalise your settings. You can choose
between three settings depending on your
personal shaving needs (from low to high):
comfort, dynamic or efficiency. When you press the
- or + button, the segment of the personal comfort
settings bar that lights up shows the currently
selected setting. You can press the + or - button to
select a different setting.
12 English

Charging
When the shaver is charging, the battery charge
percentage and the battery symbol flash white.
The battery charge is indicated by the battery
charge percentage shown on the display.
Quick charge: When the battery symbol starts to
flash quickly, the shaver contains enough charge
for one shave.
Battery fully charged
When the battery is fully charged, the battery
charge percentage lights up white continuously.
Note: This appliance can only be used without
cord. When you press the on/off button during or
after charging, you hear a sound to indicate that
the shaver is still connected to the wall socket.
Note: When the battery is full, the display switches
off automatically after 30 minutes.
Battery low
When the battery is almost empty, the battery
charge indicator flashes orange and the shaver
beeps.
Remaining battery charge
The remaining battery charge is indicated by the
battery charge percentage shown on the display.
13
English

Cleaning reminder
Clean the shaver after every use for optimal
performance. When you switch off the appliance,
the cleaning reminder flashes to remind you to
clean the appliance.
Travel lock
When you are going to travel, you can lock the
shaver to prevent it from accidentally switching on.
Activating the travel lock
1Press the on/off button for 3 seconds to use
the travel lock mode.
While you activate the travel lock, the travel lock
symbol lights up briefly and the shaver
produces a short sound. When the travel lock is
activated, the appliance produces a sound and
the travel lock symbol flashes.
Deactivating the travel lock
1Press the on/off button for 3 seconds.
While you deactivate the travel lock, the travel
lock symbol lights up briefly and the shaver
produces a short sound.The appliance switches
on and is now ready for use again.
Note: You can also deactivate the travel lock by
connecting the appliance to the wall socket.
Replacement reminder
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
14 English

The appliance is equipped with a replacement
reminder which reminds you to replace the
shaving heads. The shaver beeps, the replacement
reminder lights up and the arrows flash to indicate
that you have to replace the shaving heads.
Note: After replacing the shaving heads, you can
reset the replacement reminder by pressing the
on/off button for 7 seconds. If you do not reset the
replacement reminder, the shaver resets
automatically after 9 shaves.
Notification symbol
Overheating
If the appliance overheats during charging, the
notification symbol flashes orange. When this
happens, the shaver switches off automatically.
Charging continues once the temperature of the
appliance has decreased to the normal level.
Blocked shaving heads
If the shaving heads are blocked, the notification
symbol lights up orange continuously. The
replacement reminder and the cleaning reminder
flash white alternately and the shaver beeps. In
this case, the motor cannot run because the
shaving heads are soiled or damaged.
If the shaving heads are soiled, you have to clean
them. If the shaving heads are damaged, you have
to replace them.
Charging
Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty. The battery charge is
15
English

indicated by the battery charge percentage shown
on the display.
When you connect the shaver to the wall socket,
you hear a sound.
Charging takes approx. 1 hour. A fully charged
shaver has a shaving time of up to 60 minutes.
Note: You cannot use the appliance while it is
charging.
Charging with the supply unit
1Make sure the appliance is switched off.
1
2
2Put the small plug in the appliance and put the
supply unit in the wall socket.
When you connect the shaver to the wall
socket, you hear a sound.
3After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
Charging in the SmartClean system (specific types
only)
1Put the small plug in the back of the
SmartClean system.
2Put the supply unit in the wall socket.
3Press to open the SmartClean system cap, to be
able to place the shaver in the holder ('click').
16 English

4Hold the shaver upside down above the holder.
Make sure the front of the shaver points
towards the SmartClean system holder.
1
2
3
5Place the shaver in the holder, tilt the shaver
backwards and press down the SmartClean
system cap to connect the shaver (‘click’).
Note: The battery symbol starts to flash to indicate
that theappliance is charging. When the battery is
fully charged, the battery symbol lights up
continuously.
Using the appliance
Note: This appliance can only be used without
cord.
Switching the appliance on and off
- To switch on the appliance, press the on/off
button once.
The display lights up for a few seconds.
- To switch off the appliance, press the on/off
button once.
The display lights up for a few seconds and
shows the remaining battery charge.
Shaving
Skin adaptation period
Your first shaves may not bring you the result you
expect and your skin may even become slightly
irritated. This is normal. Your skin and beard need
time to adapt to any new shaving system. To allow
your skin to adapt to this new appliance, we advise
you to shave regularly (at least 3 times a week) and
17
English

exclusively with this appliance for a period of 3
weeks.
Shaving tips
- Selectyour personal comfort settings (see ‘The
display’).
- For the best results on skin comfort, pre-trim
your beard if you have not shaved for 3 days or
longer.
Dry shaving
1Switch on the appliance.
The display lights up for a few seconds.
2Move the shaving heads over your skin in
circular movements to catch all hairs growing in
different directions. Make sure each shaving
head is fully in contact with the skin. Exert
gentle pressure for a close, comfortable shave.
Note: Do not press too hard, as this can cause
skin irritation.
3Clean the appliance after use.
Wet shaving
For a more comfortable shave, you can also use
this appliance on a wet face with shaving foam or
shaving gel.
To shave with shaving foam or shaving gel, follow
the steps below:
1Apply some water to your skin.
18 English

2Apply shaving foam or shaving gel to your skin.
3Rinse the shaving unit under the tap to ensure
that the shaving unit glides smoothly over your
skin.
4Switch on the appliance.
5Move the shaving heads over your skin in
circular movements to catch all hairs growing in
different directions. Make sure each shaving
head is fully in contact with the skin. Exert
gentle pressure for a close, comfortable shave.
Note: Rinse the shaving unit regularly to ensure
that it continues to glide smoothly over your
skin.
6Dry your face.
7Clean the appliance after use.
Note: Make sure you rinse all foam or shaving
gel off the appliance.
Using the click-on attachments
Note: Attach the click-on cleansing brush
attachment on the attachment base first, before
placing it on the appliance.
Removing or attaching click-on attachments
1Make sure the appliance is switched off.
19
English

2Pull the attachment straight off the appliance.
Note: Do not twist the attachment while you
pull it off the appliance.
3Insert the lug of the attachment into the slot in
the top of the appliance. Then press down the
attachment to attach it to the appliance (‘click’).
Using the beard styler attachment with
comb
You can use the beard styler with the comb
attached to style your beard at one fixed setting,
but also at different length settings. You can also
use it to pre-trim any long hairs before shaving for
a more comfortable shave.
Note: The beard styler is only intended for
trimming facial hair. Do not use on areas below the
neck.
The length settings on the beard styler attachment
correspond to the remaining hair length after
cutting and range from 1 to 5mm (3/64 - 3/16in).
1Attach the attachment to the appliance ('click').
2Slide the comb straight into the guiding grooves
on both sides of the beard styler attachment
(‘click’).
20 English