Philips HTR5224 User manual

Register your product and get support at
www.philips.com/welcome
HTR5224
EN User manual 3
DE Benutzerhandbuch 3
ES Manual del usuario 3
FR Mode d’emploi 3
NL Gebruiksaanwijzing 3

3
6 Adjust sound 21
Control the volume 21
Select surround sound 21
Select double bass 21
Select a preset sound effect 22
7 Specifications 23
8 Troubleshooting 24
9 Glossary 25
Contents
1 Important 4
Safety and important notice 4
Trademark notice 5
2 Your product 6
Feature highlights 6
Product overview 6
3 Connect 9
Place the product 9
Connect speakers and subwoofer 10
Connect radio antenna 10
Connect HDMI supported devices 11
Connect other devices 12
Connect power cord 14
4 Get started 15
Insert the remote control batteries 15
Control a play source 15
Change speaker settings 15
Use Philips EasyLink 17
Select a play source 18
5 Play 19
Play from portable media player 19
Play from radio 19
Use sleep timer to power off 20
Contents English
EN

4
Mains fuse (UK only)
This Digital Receiver is fitted with an approved
moulded plug. Should it become necessary to
replace the mains fuse, this must be replaced
with a fuse of the same value as indicated on
the plug (example 10A).
1 Remove fuse cover and fuse.
2 The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3 Refit the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be detached from the mains cord.
1 Important
Safety and important notice
Warning
Risk of overheating! Never install the digital•
receiver in a confined space. Always leave a
space of at least 4 inches around the digital
receiver for ventilation. Ensure curtains or
other objects never cover the ventilation slots
on the digital receiver.
Never place the digital receiver, remote•
control or batteries near naked flames or
other heat sources, including direct sunlight.
Only use this digital receiver indoors. Keep this•
digital receiver away from water, moisture and
liquid-filled objects.
Never place this digital receiver on other•
electrical equipment.
Keep away from this digital receiver during•
lightning storms.
Where the mains plug or an appliance•
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Visible and invisible laser radiation when open.•
Avoid exposure to beam.
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirements
of the following directives and guidelines:
2004/108/EC, 2006/95/EC
EN

5
Trademark notice
HDMI, HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic and the
double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital
Surround are registered trademarks and the
DTS logos and Symbol are trademarks of
DTS, Inc. © 1996-2008 DTS, Inc. All Rights
Reserved.
ENERGY STAR and the ENERGY STAR mark
are registered U.S. trademarks.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheeled bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences for the
environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules
on the separate collection of batteries. The
correct disposal of batteries helps prevent
potentially negative consequences for the
environment and human health.
Important English
EN

6
Product overview
Main unit
a (Standby-On)
Turns on the Digital Receiver or•
switches to standby mode.
b SURR (Surround Sound)
Switches audio output to one of•
these modes: multi-channel 7.1
surround, 7-channel stereo, multi-
channel 5.1 surround, 5-channel
stereo or stereo.
c SOUND
Selects a predefined sound effect.•
d PROG (Programme)
In radio mode, resets the list of•
preset stations: press to manually
reset; press and hold to automatically
reset.
In other source mode, accesses•
or exits the audio setup mode for
speaker settings.
e / TUNING
Selects the previous or next preset•
radio station.
Press and hold to start auto search.•
f Display panel
g SOURCE
Selects a connected device to•
enjoy the audio output through the
speaker system.
a bcdef gh
i
2 Your product
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers; register your product
at www.philips.com/welcome.
Feature highlights
Your product supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Note
Philips does not guarantee 100%•
interoperability with all HDMI CEC devices.
Listen to rich uncompressed multi-channel
surround sound
This product supports 7.1 channels of
uncompressed audio that delivers a true-to-
life sound experience as if you are listening to
it live.
MP3 link
Simply plug your portable media player into
the MP3 LINK socket to enjoy the music in
superb sound quality.
Sync the audio output with the video play
Synchronise audio from this Digital Receiver
with video played from other devices by
delaying the audio output from the speakers
to match the video on the TV.
EN

7
Remote Control
a (Standby-On)
Turns on the Digital Receiver or•
switches to standby mode.
b AUDIO SOURCE
Selects an audio input source.•
c HDMI SOURCE
Selects an HDMI input source.•
d RADIO
Switches to FM band.•
e SOUND
Selects a predefined sound effect.•
f /
Selects the previous or next preset•
radio station.
p
q
a
b
c
d
e
f
g
h
i
j
m
l
n
o
k
h VOLUME
Increases or decreases volume.•
i MP3 LINK
Connects a portable audio player.•
Your product English
EN

8
g (Mute)
Mutes or restores audio output.•
h Numeric buttons
Enter the number of a preset radio•
station.
i DOUBLE BASS
Turns dynamic bass enhancement on•
or off.
j SLEEP
Sets a delay after which the Digital•
Receiver switches to standby.
k OK
Confirms an entry or selection.•
l (Navigation buttons)
Navigates through menus.•
In radio mode, press up and down to•
tune the radio frequency.
In radio mode, press left or right to•
start auto search.
m SURROUND
Switches audio output to one of•
these modes: multi-channel 7.1
surround, 7-channel stereo, multi-
channel 5.1 surround, 5-channel
stereo or stereo.
n VOL +/-
Increases or decreases volume.•
o DELETE
Press and hold to erase the current•
preset radio station.
p BACK
Returns to previous step.•
Press and hold to delete selected•
station.
q AUDIO SETUP / PROGRAM
Accesses or exits options for audio•
settings.
In radio mode, resets the list of•
preset stations: press to manually
reset; press and hold to automatically
reset.
EN

9
Place the product
Place the product where it cannot be•
pushed, pulled over or knocked down.
Do not place it in an enclosed cabinet.
Make sure that you have full access to the•
power cord for easy disconnection of the
product from the power supply.
1 Place the Digital Receiver near the TV.
2 Place the speakers system at normal
listening ear-level and directly parallel to
the listening area.
3 Place the subwoofer in the corner of the
room or at least 3 feet away from the TV.
Tip
To avoid magnetic interference or unwanted•
noise, never place this Digital Receiver too
close to any radiation devices.
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
CENTER
LEFT
BACK
RIGHT
BACK
SURR
LEFT
SURR
RIGHT
3 Connect
Make the following connections to use your
Digital Receiver.
Connect this Digital Receiver:
Speakers and subwoofer•
Radio antenna•
Power•
Connect other devices:
HDMI supported devices•
Audio from TV•
Audio from cable box/recorder/game•
console/disc player
Portable media player•
Note
Refer to the type plate at the back or bottom•
of the product for identification and supply
ratings.
Before you make or change any connections,•
ensure that all the devices are disconnected
from the power outlet.
Tip
Different types of connectors may be used to•
connect this product to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your
product is available at www.connectivityguide.
philips.com.
Connect English
EN

10
Connect radio antenna
1 Connect the FM antenna to the FM75
socket on the Digital Receiver (for some
models, this cable is already connected).
2 Extend the FM antenna and fix its ends to
the wall.
Tip
For better FM stereo reception, connect to an•
external FM antenna.
FM
(75 Ω)
ANTENNA
Connect speakers and
subwoofer
1 Connect the speakers and subwoofer
to the matching sockets on the Digital
Receiver.
Note
Ensure that the colours of the plugs and•
sockets are matched.
BACK BACK
BACK BACK
EN