Philips MCD703/98 User manual

MCD703
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Composite Video Cable
1
ediuG
t
r
atS
k
ciu
Q
Control Cable
Remote control with two
AAA batteries
Remote control with two
AA batteries
FM antenna
MW antenna Quick start guide
2
laun
aM
r
e
sU
User Manual
MCD703 QUG_Eng 2006.2.22, 13:571

5
Tip
– See the User Manual for otherTV
connection options.
– For connecting to a Progressive
Scan TV, refer to the user manual for
proper connections and detailed
setup.
Setting up the TV
1
2
4
3
Connect the speaker cables.
Connect the MW and FM antennas.
Connect the control cable.
Connect the composite video cable to a TV.
Connect the power cords of the system and TV.
1
2
Press SOURCE (DISC on the remote) to select disc source.
Turn on the TV and set it to the correctVideo In channel.
5
2
AC power cord
5
1
1
1
4
3
AC power
FM antenna MW antenna
Speaker
(right)
Speaker
(left)
MCD703 QUG_Eng 2006.2.22, 13:572

Setting the clock
1
2
3
4
In standby mode, press and hold CLOCK on the remote.
When the hour digits flash, turn VOLUME +/- on the system or press VOLUME +/- on
the remote to set the hours.
Press CLOCK again and the minute digits flash.Then turn VOLUME +/- on the system or
press VOLUME +/- on the remote to set the minutes.
Press CLOCK again to confirm the time setting.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support
progressive signals or the cables are not connected accordingly, see the user manual for
proper progressive scan setup or deactivate the progressive scan feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM on the remote to exit the system menu and then DISC to exit
progressive scan.
Tip
See chapters "Getting Started" and "System Menu Options" in the
User Manual for detailed descriptions.
Night Mode
Digital Audio Setup
TV Type
MCD703 QUG_Eng 2006.2.22, 13:573

Playing a disc
Tip
– Detailed playback features and additional
functions are described in the accompany
owner's manual.
PDCC-JS/JW-0607
2005 CKoninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com
1
2
3
Press OPEN•CLOSE (0on the remote) to open the disc tray and load in a disc, then
press the same button again to close the disc tray.
➜Make sure the label side of the disc is facing up.
Playback will start automatically. If not press PLAY/PAUSEÉÅ.
To stop playback, press BAND/9 (9 on the remote).
Notes for remote control:
– First, select the source you wish to control
by pressing one of the source select keys on
the remote control (DISC orTUNER, for
example).
- Then select the desired function ( ÉÅ , í ,
ë ,for example).
MCD703 QUG_Eng 2006.2.22, 13:574