Philips 21PT136B User manual

PHILIPS
mum
PHILIPS

Installation
Follow the instructions very closely and step by step,
o This circle in front of a sentence indicates that you have to do something.
> This arrow in front of a sentence indicates the result of what you have done.
condition. Only use good quality aerial connectors and cables.
The aerial plugs should be tightly connected.
Connect the TV tightly to the mains supply socket.
Connect the aerial (indoor or outdoor) plug tighdy to the nr socket on the back of the TV.
Remote control
o Remove the battery cover from the remote control.
° Replace the battery cover.
The batteries supplied with the remote control of your TV do not contain the heavy metals
mercury and cadmium. In many countries flat batteries may not be disposed off with your
household waste. Please ensure that batteries are disposed off in accordance with any local

Auto Store
are stored on program numbers in the same sequence as they are found. After Auto Store is
started, the TV starts searching for a TV channel. When a TV channel is found, it will be
through all TV systems and.
The TV syster .— -
TV systems ar
res all TV channels available.
m FRANCE (SECAMLU)
:m EUROPE (PAL/SECAM BG)
:m UK (PALI)
> INSTALLATION menu appears,
o Press + (YES) to start the AUTOSTORE ftinction.
The Auto Store can be stopped by pressing the two buttons 0 and<> simultaneously .
(69.
To reorganize the sequence of the TV channels stored by the Autostore, refer to the se
“Storing TV channels” following steps 1,4, 5.
Operation
On Screen Display
The On Screen Display (OSD) information allows you to see the program number on which a
TV channel is stored, the timer status and a moving bar if the volume is adjusted.
Press G) to display information on the screen.
Press CD again to switch off information.
Selecting TV channels
Volume control^
O Press |J£ to switch off the so
o Press ij$< again or + to;
Menu on screen
You can also set the timer, select the screen format and pre-select the external electronic
equipment connected to the TV.
are initially stored by the factory. Using the menu on screen you can change these values. If you
store these values (by pressing the two buttons ^ and O' simultaneously after a change), the
TV will switch on with your stored picture and sound values.
If you want to leave the menu, for example after changing the contrast setting, you can either wait
approximately 10 seconds or continue to press the MENU button until the menu disappears from the

Program 0 I ^Xideo:
si,

Different volume level for a specific TV char
Not all TV channels broadcast volume at the same level.
With this function you can alter the volume level of one channel with respect to the others.
o Press MENU button for at least 4 seconds.
> Immediately VOLUME appears, keep on pressing until “^/PROGRAM” appears.
> STORED appears for a few seconds.
Peripheral connections
Aerial connection
° Unplug the aerial plug from your TV and insert it into the aerial input ir of your equipment.
° Check in the handbook of the particular equipment to see what the test signal looks like.
Now, refer
Euroconnection (scart) for e.g. videorecorder
on theb^kof’the'TV?KaseaSyowSer fctdw^prapiiaecal
o Connect an
If you do not see the picture, select program number 0 by pressing P + or -
NOTE: If you do not see the picture from the connected videorecorder
screen ” (EXTERNAL item), if program 0 = AV has been selected properly.
Do not use
Euroconnection (scart) for audio amplifier
dealer for an appropriate cable.

Audio/Videofront connections .
o Connect your equipment to the Audio/Video input of your TV.
° Press START or PLAY on your equipment.
Do not use the Audio-Video front socket and the euroconnector socket at the same time.
S-Video front connection
You can connect S-VHS or Hi-8 audio-video equipment to the S-Video socket on the front of
° Connect your equipment to the S-Video socket of your TV.
o Press the MENU button on the remote control several times untill EXTERNAL appears,
o Press + to select S-Video.
° Press MENU several times to leave the on screen menu .
o Press START or PLAY on your equipment.
NOTE: If you do not see the picture from the connected equipment , use the EXTERNAL item . in
the MENU to ensure that program 0 = S-Video is selected
Do not use the S-Video socket and the Euroconnector or Audio/Video socket at the same time.
Headphones
Tips
Clean the TV using a slightly damp chamois leather.
Never use aggressive cleaning agents.
other installed TV in good condition? Do you use good quality aerial connectors and cables?
Double or black and white picture on the screen using peripheral connections:
NOTE: If you do not see the picture from the connected equipment, use the EXTERNAL
VHS or Hi-8 audio-vkko'connecto^for 6 ^ (for euroconnectar'o/front Audfo/Video
No solution:
Switch your TV off and on again with the © button.
Switch off the TV and call your dealer or TV-technician when nothing helps or when:
Environmental information
companies can dismantle the discarded TV to concentrate the reusable materials and to
Please find out about local regulations on disposal of your old TV set.