Philips 24PFL3952/V7 User manual

Register your product and get support at
24PFL3952/V7

Contents
1 Notice 2
2 Important 3
5
4 11
5 Play photos, music and videos 16
7 Product information 20
6 Troubleshooting
18
3
o
Product disposal Guidelines 4
Consumer Guidelines
Warranty
8
9
22
23

1 Notice
Pixel characteristics
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen. This is a structural property of
the display (within common industry standards)
and is not a malfunction. Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
Warranty
No components are user serviceable. Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
Service Centres and official repair shops.
or implied.
2 EN

• Two people are required to lift and carry
lbs.
•
the supplied stand. Secure the stand to
surface that can support the combined
•
wall mount that can support the weight of
that can support the combined weight of
Ltd. bears no responsibility
for improper wall mounting that result in
accident, injury or damage.
Risk of injury to children!
Follow these precautions to prevent the
children:
•
by a cloth or other material that can be
pulled away.
•
the edge of the surface.
•
as a bookcase) without anchoring both
suitable support.
• Educate children about the dangers of
Risk of swallowing batteries!
• The product/remote control may
contain a coin-type battery, which can be
swallowed. Keep the battery out of reach
of children at all times!
Risk of overheating!
•
Always leave a space of at least 4 inches
Ensure curtains or other objects never
2 Important
Read and understand all instructions before you
follow instructions, the warranty does not apply.
Safety
Risk of electric shock or fire!
•
Never place liquid containers, such as
the power outlet immediately. Contact
checked before use.
•
batteries near naked flames or other
heat sources, including direct sunlight. To
prevent the spread of fire, keep candles
control and batteries at all times.
• Never insert objects into the ventilation
•
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
Risk of short circuit or fire!
• Never expose the remote control or
batteries to rain, water or excessive heat.
• Avoid force coming onto power plugs.
Loose power plugs can cause arcing or
fire.

•
outlet, ensure that the power voltage
matches the value printed on the back
•
power cord.
•
from the power outlet, ensure that you
have full access to the power cord at all
times.
• When you disconnect the power cord,
always pull the plug, never the cable.
•
outlet and antenna before lightning
storms. During lightning storms, never
antenna cable.
Risk of hearing damage!
• Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
•
room temperature before connecting the
alcohol, chemicals or household cleaners
•
Never touch, push, rub or strike the screen
with any object.
• To avoid deformations and colour fading,
Screen care
• Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
•
•
damp cloth. Never use substances such as
Product disposal Guidelines:
Visit-http://www.philips.com
return this product to a nearby authorized collection center, registered dismantler,
recycler, service center when disposing of this product.
In case of further assistance, you may contact nearest authorized service center.
Or Please see the Company website for further information on collection centers etc.
Visit-http://www.philips.com
( )
Toll: 39 40 40 40( prefix state capital STD code), Via SMS ‐ “SVC” on 53030
Toll: 39 40 40 40( prefix state capital STD code), Via SMS ‐ “SVC” on 53030

Congratulations on your purchase, and welcome to Philips. To fully benefit from the
3.1 Name and Function of Control on Set
3
Note
•
•
MENU
PLAYER/HOME THEATER
HDMI/ARC IN
USB
USB Drive
CABLE
(24PFL3952/V7)

3.2 Name and Function of Control on Remote
1
2
3
4
5
6
7
8
9
10
11
12
13
14 15
16
17
18
19
20
SOURCE TV FORMAT
LIST INFO
OK
ADJUST OPTIONS
6 EN

~5m
~30o
1(Standby-On)
•
unless it is physically unplugged
2Multimedia Control buttons
• Control video or music.
• Selects connected devices.
3
4
•
Access the Channel List.
•
5
(Navigation buttons)
• Navigate through menus and select
6
• Confirm an entry or selection.
7
Access the adjust menu to adjust settings.
8
•
Return to the previous menu or exit
a function.
•
9
Previous/Next)
Switch channels or navigate through
menu pages, tracks, albums or
folders.
•
10
Adjust volume.
+/-
•
Color buttons
Select tasks or options.
12 •
0-9 Numeric buttons
• Select channels.
13
• Not applicable for this series models.
14
•
15
Mute or restore audio.
•
16
17
Access the option menu to adjust settings.
•
18
•
19 ( Home )
• Access the home menu.
20 • Adjust picture format.
3.5 Remote control usage
When you use the remote control, hold it close
sensor. Make sure that the line-of-sight between
furniture, walls or other objects.
Not applicable for this series models.
Displays the source information with
details of input connected .
7

3. Refix the battery compartment door.
3.3 Battery Installation
1. Remove the battery compartment door.
as indicated.
1 2 3
8

3.4 Stand Assembly - 24”
Note: Above images are for representation only.
4. Fix the rubber foots to the stand base (if provided in accessory bag)
Part – 1
Side Stand
Quanty – 1 each
Part – 2
Screws – MC 4X10
Quanty ‐ 4
Place side stand and insert screws as shown below:
Part – 3
9

3.5 Energy Consumption Guideline
10 EN

Press to move, and press to adjust.
: Access predefined smart
: Ideal settings for listening to music
.
: Ideal settings for spoken audio,
[Volume] : The main speaker volume can be
reduces sudden volume changes, for example
4.1 Manually adjust picture setting
4 Use more of
Menus help you to install channels, change
picture and sound settings and access other
1Press
» The menu screen appears.
1
2
•
•
[Contrast] : Adjust the intensity of
backlight areas, while the video contents
are kept unchanged.
• [Brightness] : Adjust the intensity and
details of dark areas.
: Adjust color saturation.
[Hue]: Compensate for color variations.
•
[Sharpness] : Adjust sharpness in the
•
[Color Temperature]: Adjust the color
balance in an image.
•
Press to move, and press to adjust.
Select one of the following settings, then
Press [Picture]>[Picture Mode],
then press okay.
• [Color]
[Backlight] : It varies the backlight intensity.
This function is used
to select the preset picture settings.
.
•
[Personal]
• [Vivid] : Rich and dynamic settings,
ideal for daytime.
•
[Bright]
: Ideal settings for night time.
•
[Soft] : Soft light and mild colors.
picture settings.
[Blue back]
•
: :This function is used to
4.2 Manually adjust sound setting
1Press .
2Select >
[Sound] then press
3 Select one of the following settings, then
•
sound settings.
[Sound Mode]
• [Standard] : Settings that suit most
environments and types of audio.
• [Music]
• [Movie]: Ideal settings for movie.
• [News]
such as news.
• [Personal] : Apply the settings that were
customised in the sound menu.
Auto volume leveler
• [Equalizer]
various frequencies.
• [Bass] :
• [Treble] :
• [Balance] : Adjust the balance of the right
and left speakers.
•
adjusted by varying this volume bar.
• [Speakers] : The main speakers can be
• automatically
when switching channels.
Adjust the bass level.
Adjust the treble level.
]:
Select Fixed for default settings and
variable to vary it.
adjusted by this option.
•
•
EN 11

1Press
2 Select [Setup] > [Features]
then press
3 Select one of the following settings.
.
Press to move, and press to adjust.
Press arrow and
navigation keys to select any language
like English,Hindi,Marathi,Telgu etc.
displayed in this language.
[Input Source] : Select this option for
display current input source and source
can be changed with Up/Down navigation
keys.
[Easy Link]* :
This feature operates only
device
like a is
Sound will be activated
enabled
[Boot logo] :
Press Right navigation key
and Favorite logo will display the
Up/Down /
logo
To keep a photo as favorite boot logo,
play the image through multimedia and
select ‘Logo’ option in guide bar.
6.
7. [Reset]
: Select this option to reset all
Feature, Audio, Video parameters to Default
value.
8. [Software Upgrade] : This is for
:
1.
2.
3.
4.
5.
4.4 Channel Installation
•
[Manual Install] :Select this for manually
channels.
4
[Auto Install]
set will start auto tuning for all available
1Press .
2Select [Channel Installation]
then press
3 Select one of the following settings, then
searching the channels,select the function
from which tuning will start.
Press to move, and press to adjust.
>
[Channel Management]
Note
•oponal
*
*
*
Bootlogo
,
12 EN

audiovisual signals from mobile phones to
supported television sets. Note that it only
operation manual of your phone.
cable, the
screen and some of mobile applications
remote control.
get desired connectivity results. If some
problem occurs in connecting your device
commands.
control. For this you can use blue tooth
compatible keyboard/mouse available in
market.
is more than phone, the video quality may
quality please check content resolution of
your device.
(Home Theater) through high speed
speaker will be deactivated & volume
file transfer feature. To use this feature use
following steps below:
on remote or keypad.
3) Select either Picture, Music, Movie or
Text option in multimedia source
depending upon file to be transferred.
which you want to copy data and open it.
5) Go to the file to be copied and press the
you to paste the copied file.
‘Paste’.
progress bar will be displayed as the copy
Paste operation is being performed.
9) After copying is successful, ‘Copy
Success message is displayed.
1) Copy time will vary depending upon file
size. larger files will need more time.
2)Multiple files can be copied at a time.
from which files was copied. It will not be
‘Cut - Paste’.
enough space.
6) Boot logo image can not read from
7) USB to USB transfer feature is optional.
*
*
*
EN 13

4.8 Use Philips EasyLink
with Philips EasyLink enhanced control
control.
•
•
device properly
• Switch on EasyLink
Note
•The EasyLink-compliant device must be
switched on and selected as the source.
•Philips does not guarantee 100%
features.
1 Press
2 Select [Setup] > [Features] >
[EasyLink] > [EasyLink].
3
Note
•
unavailable.
1 Press
2 Select [Setup] > [Features] >
[EasyLink]
3
[EasyLink] > [Auto turn off] >
4.12 Control the device using
Now use a single remote to control your
tv remote
1 Press
2 Select [Setup] > [Features] >
[EasyLink] > [Device Menu]
4.11 Search the connected devices
Device list.
1 Press
2 Select [Setup] > [Features] >
[EasyLink] > [Device Search] >
Pause FR FF Prev. Next Stop
Play
Press to select the function icon, press
*
14 EN

1
2 Select one of the following options, then
• [Status]:
Display information
concerning currently viewing
channel/source.
4.13 Use the Options menu
Visit options relevant to current action or
selection.
Status
Energy Saving
Guide Bar
[Energy Saving]: Respective menu
Press
•
[Guide Bar] :
Press to access menu bar.
pop ups
Respective menu
pop ups
refer 5.8 for more details.
refer 4.10 for more details.
Guide Bar only applicable for
Note
4.14 Use the Adjust menu
2 Select one of the following options, then
• [Picture Mode]:
The function is
used to select preset picture
setting.
Visit options relevant to current action or
selection.
[Sound Mode]: The function
setting.
[Picture Format]:The function
select preset audioused to
select any picture format.used to
[Freeze]: The function
freeze the picture.used to
[Sleep Timer]:The function
adjust sleep timer.used to
EN 15

5 Play photos, music and videos
photos, music or videos stored on it.
1
2
3 Press
4
5.2 View photos
1
2 Select a photo or a photo album, then
• To preview the next or previous photo,
press then press to play
5.3 View a slide show of your photos
Press the following buttons to control
play of selected photos.:
• to play.
• to pause.
• to play the previous or next
photo.
5.4 Listen to music
1
2 Select a music track or album, then press
5.5 Watch video
1
2
3To control play, press buttons:
• to play & to pause.
• to play the previous or next
video.
5.6 Text
1
2 Select a Text File, then Press
16 EN

5.7 Music,Photo, video, text
mode control menu bars
You can select the multimedia functions
Stop etc.
To use above functions press
Picture mode menu bar:
Text mode menu bar:
Music mode menu bar:
Video mode menu bar:
Caution
•Follow this procedure to avoid damage to your
1
2
Press to select the function icon, press
Press to select the function icon, press
All
EN 17

Previously installed channels do not appear in
the channel list:
Check that the correct channel list is
selected.
6.3 Picture issues
Check that the antenna is properly
Check that the correct device is selected
There is sound but no picture:
Check that the picture settings are
correctly set.
connection:
Check that the antenna is properly
Loudspeakers, unearthed audio devices,
neon lights, high buildings and other large
objects can influence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
If reception on only one channel is poor,
fine tune this channel.
There is poor picture quality from connected
devices:
Check that the devices are connected
properly.
Check that the picture settings are
correctly set.
flexibility to change and save settings.
The picture does not fit the screen; it is too
big or too small:
The picture position is incorrect:
Picture signals from some devices may
not fit the screen correctly. Check the
signal output of the device.
6 Troubleshooting
This section describes commonly encountered
issues and accompanying solutions.
Disconnect the power cable from the power
Check that the power cable is securely
connected.
The remote control is not working properly:
Check that the remote control batteries
are correctly inserted according to the +/-
orientation.
Replace the remote control batteries if they are
flat or weak.
Disconnect the power cable from the power
reconnecting the power cable. If the blinking
reoccurs, contact Philips Consumer Care.
Enter ‘8202’.
No action is required. The creaking sound is
cools down and warms up. This does not impact
performance.
18 EN