Philips 10BDL3051T User manual

1.1 Installation of Philips 10BDL3051T:
1.1.1 USB flash drive
1. Download AndroidDS.apk from: http://a.dsig.tv/
2. Copy AndroidDS.apk to the USB-stick.
1.1.2 Screen settings
1. Power On TV
2. Select Language.
3. Select network connection
a. Ethernet
i. Connect the Ethernet cable.
b. Wifi:
i. Select Wifi and press Next
ii. Select SSID
iii. Enter the password
iv. Connect to the network
v. Skip Signage Display settings.
vi. Skip loading configurations from USB or SD.
vii. Select Finish
4. Enter the Configuration Menu. “Stop key, then Volume down key.
Stop and volume keys are located on the back side of the screen.
See figure 1.
Figure 1: Backside of screen
5. Enter pincode. Default pin is: 1234.
6. Select Settings
7. Select Signage Display
8. Select “Change Administrator Password”
9. Enter old pin code. >1234.>
10. Enter new pincode <1111>
11. Exit to Configuration Menu.
12. Connect a USB-stick with the AndroidDS.apk to the screen.
13. Select Apps
14. Select File Manager

R&D 2018-05-14 Page 2 of 2
15. Open mnt/
16. Open usb_storage’
17. Open USB_DISK1
18. Open the AndroidDS.apk
19. Select install
20. After installation, select done and go back to the Configuration Menu.
21. Select Settings
22. Select Signage Display
23. Select Custom app
24. Click Select App, choose Digital Signage and save
25. Return to Signage Display
26. Select “Boot on source”
27. Select Input
28. Select “Custom app”
29. Select Date & Time and Select time zone.
30. Exit the menu
The install code is now showing. Follow Error! Reference source not found.
to complete the installation.