Philips BDL4631V User manual

Philips Professional
&
Business Solutions
EN User Manual
TYPE NR. BDL4631V

TABLE OF CONTENTS
SAFETY INSTRUCTIONS......................................................................................................................................................................1
Contents.....................................................................................................................................................................................................7
Elements Name and Functions ..............................................................................................................................................................8
Terminal Panel...................................................................................................................................................................................9
Remote Control.............................................................................................................................................................................10
Operating Range for the Remote Control ..............................................................................................................................11
Handling the remote control ......................................................................................................................................................11
How to Mount or Attach Feet to the LCD Monitor.....................................................................................................................12
Setup Procedure......................................................................................................................................................................................15
Install the LCD Monitor in Portrait M ode ........................................................................................................................................17
Connectivity .............................................................................................................................................................................................18
Connectivity Diagram....................................................................................................................................................................18
Connecting to a Personal Computer........................................................................................................................................19
Connecting to a Digital Interface Equipment..........................................................................................................................20
Connecting to a DVD Player.......................................................................................................................................................21
Connecting to a Stereo Amplifier ..............................................................................................................................................22
Basic Operation.......................................................................................................................................................................................23
Power ON and OFF Modes........................................................................................................................................................23
Power Indicator..............................................................................................................................................................................24
Using Power Management............................................................................................................................................................24
Display Signal ofVideo Source Setting to [VIDEO] ...............................................................................................................24
Picture Size ......................................................................................................................................................................................24
Smart Picture Mode ......................................................................................................................................................................25
Audio Source Switching................................................................................................................................................................25
Control Lock Mode.......................................................................................................................................................................25
OSD Information ...........................................................................................................................................................................25
OSD (On-Scr een-Display) Contr ols ...................................................................................................................................................26
PICTURE..........................................................................................................................................................................................27
SCREEN ............................................................................................................................................................................................29
AUDIO.............................................................................................................................................................................................31
PIP (PICTURE IN PICTURE) ......................................................................................................................................................32
CONFIGUR A TION 1...................................................................................................................................................................33
CONFIGUR A TION 2...................................................................................................................................................................35
ADV ANCED OPTION.................................................................................................................................................................37
NOTE ...............................................................................................................................................................................................40
Featur es .....................................................................................................................................................................................................42
Tr oubleshooting ......................................................................................................................................................................................43
Specifications............................................................................................................................................................................................45
Pin Assignment .........................................................................................................................................................................................46

User Manual BDL4631V/00
1
SAFETY INSTRUCTIONS
WARNINGS AND PRECAUTIONS
KNOW THESE SAFETY SYMBOLS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any
inside part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included
with this product.
Note to CATV system installer: This reminder is provided to call CATV system installer’s attention to Article
820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as
practical.
Caution: FCC/CSA regulations state that any unauthorized changes or modifications to this equipment may void the user’s authority to
operate it.
Caution: To prevent electric shock, match the wide blade of plug to the wide slot, and fully insert the plug.
Attention: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la bome correspondante
de la prise et pousser jusqu’au fond.
Important: One Federal Court has held that unauthorized recording of copyrighted TV programs is an infringement
of U.S. copyright laws. Certain Canadian programs may also be copyrighted and any unauthorized recording in whole
or in part may be in violation of these rights.
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The Socket-outlet shall be installed near the apparatus and shall be easily accessible.

User Manual BDL4631V/00
2
REGULATORY INFORMATION
CE DECLARATION OF CONFORMITY
Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards
• EN60950-1:2001 (Safety requirement of Information Technology Equipment)
• EN55022:2006 (Radio Disturbance requirement of Information Technology Equipment)
• EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment)
• EN6100-3-2:2000+A2:2005 (Limits for Harmonic Current Emission)
• EN6100-3-3:1995+A1:2001+A2:2005 (Limitation of Voltage Fluctuation and Flicker)
following provisions of directives applicable
• 73/23/EEC (Low Voltage Directive)
• 2004/108/EC (EMC Directive)
• 93/68/EEC (Amendment of EMC and Low Voltage Directive) and is produced by a manufacturing organization on
ISO9000 level.
WARNING
This is a class A product In a domestic environment this product may cause radio interference in which case the user may be required
to take adequate measures.
FEDERAL COMMUNICATIONS COMMISSION (FCC) NOTICE (U.S. Only)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
In a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device.
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture.
THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE- CAUSING
EQUIPMENT REGULATIONS.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.

User Manual BDL4631V/00
3
POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE
The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works
together (computer, monitor, printer, and so on) should have the same power supply source.
The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with
a nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be
located near the equipment and easily accessible.
A protection mark “B” confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-
42107 and PN-89/E-06251.
ELECTRIC, MAGNETIC AND ELECTRONMAGNETIC FIELDS (“EMF”)
1. Philips Royal Electronics manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general
have the ability to emit and receive electromagnetic signals.
2. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all
applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.
3. Philips is committed to develop, produce and market products that cause no adverse health effects.
4. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence
available today.
5. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments
in standardization for early integration in its products.

User Manual BDL4631V/00
4
INFORMATION FOR UK ONLY
WARNING - THIS APPLIANCE MUST BE EARTHED.
Important:
This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this
type of plug proceed as follows:
1. Remove fuse cover and fuse.
2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type.
3. Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an
appropriate 3-pin plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5A. If a plug
without a fuse is used, the fuse at the distribution board should not be greater
than 5A.
Note: The severed plug must be destroyed to avoid a possible shock hazard should it
be inserted into a 13A socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured in accordance with the following code:
BLUE - “NEUTRAL” (“N”)
BROWN - “LIVE” (“L”)
GREEN & YELLOW - “EARTH” (“E”)
1. The GREEN AND YELLOW wire must be connected to the terminal in
the plug which is marked with the letter “E” or by the Earth symbol or
coloured GREEN or GREEN AND YELLOW.
2. The BLUE wire must be connected to the terminal which is marked with the letter
“N” or coloured BLACK.
3. The BROWN wire must be connected to the terminal which marked with the letter
“L” or coloured RED.
Before replacing the plug cover, make certain that the cord grip is clamped over the
sheath of the lead - not simply over the three wires.

User Manual BDL4631V/00
5
中国电子信息产品污染控制标识要求 (中国RoHS法规标示要求)
产品中有毒有害物质或元素的名称及含量
○：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006
标准规定的限量要求以下 ◦
×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T11363-2006 标准规定的限量要求 ◦
环保使用期限
此标识指期限(十年)，电子信息产品中含有的有毒有害物质或元素在正常使用的条件下不会发生外
泄或突变，电子信息产品用户使用该电子信息产品不会对环境造成严重污染或对其人身、财产造
成严重损害 的期限。

User Manual BDL4631V/00
6
NORTH EUROPE (NORDIC COUNTRIES) INFORMATION
Placering/Ventilation
VARNING:
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.
Placering/Ventilation
ADVARSEL:
SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE.
Paikka/Ilmankierto
VAROITUS:
SIJOITA LAITE SITEN, ETTÄVERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADVARSEL:
NÅR DETTE UTSTYRET PLASSERES, MÅDU PASSE PÅAT KONTAKTENE FOR STØMTILFØRSEL ER LETTE ÅNÅ.
END-OF-LIFE DISPOSAL
Your new TV/Monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the
amount of reusable materials and to minimize the amount to be disposed of.
Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer.
(For customers in Canada and U.S.A.)
This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations. For additional information on
recycling contact www.eia.org (Consumer Education Initiative)
WASTE ELECTRICAL AND ELECTRONIE EQUIPMENT-WEEE
Attention users in European Union private households
This marking on the product or on its packaging illustrates that, under European Directive 2002/96/EG
governing used electrical and electronic appliances, this product may not be disposed of with normal
household waste. You are responsible for disposal of this equipment through a designated waste electrical
and electronic equipment collection. To determine the locations for dropping off such waste electrical and electronic, contact your local
government office, the waste disposal organization that serves your household or the store at
which you purchased the product.

User Manual BDL4631V/00
7
V ideo Signal Cable
(D-SUB to D-SUB Cable)
Contents
The BDL4631V monitor pack* should include:
• LCD monitor
• Power cord (1.8 m)
• VGA Signal Cable (1.8 m)
• DVI-HDMI Cable (1.8 m)
• User Manual
• Remote Control and AAA Batteries
• Clamper x 2 (T o pr event from falling)
• Cable belt x 3 (For tightening cables)
• Screw for Clamper (T o pr event from falling) x 2
• Main switch cover
• Screw for Main Switch cover x 2
• Cable Holder x 2
• BNC TO RCA adapter x 5
User’s
Manual
Screw for Main switch cover
(3 x 6) x 2
Main switch cover Cable Holder x 2 Clamper x 2
(T o pr event from falling)
BNC TO RCA adapter x 5
Screw for Clamper
(M4 x 12) x 2
* The supplied power cord varies depending on destination.
For EU For UK
For North
America
Power cord
* Please make sure that for all other regions, apply a power cord that
conforms to the AC voltage of the power socket and has been approved
by and complies with the safety regulations of the particular country.
Cable belt x 3
(For tightening the power cord
and VGA / HDMI cable)
Remote Control and
AAA
Batteries
Stand x 2
* You might like to save the package box and packing material for shipping
the monitor.
*
The following components are pr epar ed as options.
• External Speakers
• Feet
Xxxxxxxxxxxxxx
xxxxxxxxxxxxxx
xxxxxxxxxxxxxx
xxxxx
DVI-HDMI Cable

User Manual BDL4631V/00
8
Elements Name and Functions
Control Panel
POWER button ( ) :To switch the power on/off.
MUTE button : To switch the audio mute ON/OFF.
INPUT button: To set the function while OSD menu is on or to toggle switch between [HDMI1], [HDMI2], [PC-A], [CVI], [VIDEO<S>] and
[VIDEO] while OSD menu is off .
PLUS (+) button: To increase the adjustment while OSD menu is on, or to increase the audio output level while the OSD menu is off.
MINUS (-) button:To decrease the adjustment while OSD menu is on, or to decrease the audio output level while the OSD menu is off.
UP () button : To move the highlight bar up to adjust the selected item while OSD menu is on, or to activate the OSD menu when the OSD
menu is off.
DOWN () button :To move the highlight bar down to adjust the selected item while OSD menu is on, or to activate the OSD menu when
the OSD menu is off.
EXIT button:To return to previous menu while OSD menu is on or to activate the OSD menu when the OSD menu is off.
Remote control sensor and Power indicator: To receive the IR signal from the remote control. The indicator would show green
when the LCD monitor is active and would turn red when the LCD is POWER OFF. While in the case of the system is in power save mode, it would
show both green and red. When SCHEDULE is enabled, it would blink green and glow red. If the indicator blinks red , it tells that a failure is
detected.
Main Power Switch : To turn the main power on/off.
NOTE: Keyboard Control Lock Mode This function completely disables the access to all Keyboard Control functions. To enable the
keyboard control lock, press both of “” and “” buttons and hold down continuously for more than 3 seconds. To recover back to the user mode,
press both of “” and “” and hold continuously for three 3 seconds.
Buttons

User Manual BDL4631V/00
9
Terminal Panel
AUDIO IN 1, 2, 3
To input audio signal from external equipment such as a computer,VCR or DVD player.
AUDIO OUT
To output the audio signal from the AUDIO IN 1,2 and 3 jack.
EXTERNAL CONTROL (mini D-Sub 9 pin)
This is for serial connection when multiple BDL4631V monitors are connected. To achieve the remote control through RS232 command (refer to the
RS232 remote control user manual), connect the IN connector with the RS-232C OUT connector from the computer or a multi-connected BDL4631V
monitor and connect the OUT connector with the RS-232C IN connector of BDL4631V monitor.
VIDEO IN/OUT
VIDEO IN connector (BNC and RCA): To input a composite video signal. Note that BNC and RCA are not available at the same time.
VIDEO OUT connector (BNC): To output the composite video signal fromVIDEO IN connector.
S-VIDEO IN connector (MINI DIN 4 pin): To input the S-video (Y/C separate signal).
EXTERNAL SPEAKERTERMINAL
To output the audio signal to external speakers from AUDIO IN 1, 2, 3 jack or HDMI.
AC IN connector
To connect with the supplied power cord.
HDMI 1 IN
To input digital RGB signals from a digital equipment or computer.
* This connector does not support analog input.AUDIO is supported via HDMI.
HDMI 2 IN
To input digital RGB signals from a digital equipment or computer.
* This connector does not support analog input.AUDIO is supported via HDMI.
PC-A IN (mini D-Sub 15 pin)
To input analog RGB signals from a computer or other RGB equipment.
RGB OUT (mini D-Sub 15 pin)
To output the signal from PC-A IN.
CVI IN [Y, Pb/Cb, Pr/Cr] (BNC)
To Connect an equipment such as a DVD player, HDTV device, or Laser disc player.

User Manual BDL4631V/00
10
Remote Control
POWER button
To turn the power on/off.
If LED Power Indicator on the monitor is not lightening, then the
remote control will not work.
SMART PICTURE button
To select smart picture mode from [HIGHBRIGHT], [STANDARD],
[sRGB], [CINEMA] .
HIGHBRIGHT : for moving image such as Video
STANDARD: for images (Factory setting)
sRGB: for text based images
CINEMA: for movies.
PIP (Picture In Picture) button
ON/OFF button: To turn PIP mode ON/OFF.
INPUT button: To select the input signal for the sub-picture.
CHANGE button: To exchange between the main picture and sub-
picture.
Note:
The “PIP” and “POP” modes do not work if the screen size is
“CUSTOM” or “REAL”.
CONTRAST button
To start CONTRACT OSD selection, and then push "+" or "-" button
to adjust the value.
DISPLAY button
To turn on/off the setting information displayed on the right-up corner
of the screen.
MINUS button
To decr ease the adjustment with OSD menu.
To move the sub-picture left when in “PIP”mode.
SET button
To activate the setting with OSD menu.
AUTO ADJUST button
T o execute the AUTO ADJUST function.
MUTE button
T o turn the mute function on/off.
VIDEO SOURCE button
To set the video source by toggle selection from [HDMI1], [HDMI2],
[PC-A], [CVI], [VIDEO<S>] and [VIDEO].
AUDIO SOURCE button
To set the audio source by toggle selection from [AUDIO1] to [AUDIO2],
[AUDIO3] and [HDMI] .
Note 1: You cannot select the audio source for video source is set to
[VIDEO<S>] or [VIDEO].
Note 2: [HDMI] is selectable only when the video source is [HDMI 1] or
[HDMI 2].
SIZE button
To select the pictur e size from [FULL], [NORMAL], [CUSTOM] , [DYNAM
IC] and [REAL].
BRIGHTNESS button
To start the BRIGHTNESS OSD selection, and then push "+" or "-"
button to adjust the value.
UP button
To move the highlight bar up to adjust the selected item when OSD menu
is on.
To move the sub-picture up when in “PIP”mode.
MENU button
T o turn the OSD menu on/off.
PLUS button
To incr ease the adjustment with OSD menu.
To move the sub-picture right when in “PIP”mode.
EXIT button
To turn to the pr evious OSD menu.
DOWN button
To move the highlight bar down to adjust the selected item when OSD
menu is on.
To move the sub-picture down when in “PIP”mode.
VOLUME UP button
To incr ease the audio output level.
VOLUME DOWN button
To decr ease the audio output level.

User Manual BDL4631V/00
11
Operating Range for the Remote
Control
Point the top of the remote control toward the LCD monitor's remote
sensor during button operation.
Use the remote control within a distance of about 7 m/23 ft from the
front of the LCD monitor's remote control sensor and within a
horizontal and vertical angle 30°with a distance of about 3 m/10 ft.
Handling the remote control
* Do not subject to strong shock.
* Do not allow water or other liquid to splash the remote control.
If the remote control gets wet, wipe it dry immediately.
* A void exposur e to heat and steam.
* Other than to install the batteries, do not open the remote
control.
30° 30°
NOTE:
The remote control system may not function when direct sunlight or
strong illumination strikes the remote control sensor of the LCD monitor,
or when ther e is an obstacle in the radiation path.

User Manual BDL4631V/00
12
How to Mount or Attach Feet to the LCD Monitor
You can install the LCD monitor in one of the following two ways:
Way 1: Attach and re move the optional feet
How to install feet
1. Please turn the monitor off.
2. After inserting feet in guide block, fasten the thumbscrews on both sides of the monitor.
NOTE:
Install the feet with their longer portions directing to the front.
Screws
Optional Feet
In the upright position
How to remove the
feet
1. Spr ead the protective sheet on the flat surface.
2. Make the monitor lying on the protective sheet.
3. Remove screws using a screwdriver and place them in a safe place for r euse.
Longer portions directs to the front

User Manual BDL4631V/00
13
To avoid monitor from falling
Take measures to prevent the monitor from falling over in case of an earthquake or other disaster might occur to lessen the probability of injury and
damage.
As shown in the figure below, secure the monitor to a solid wall or pillar using rope (commercially available) strong enough to bear the weight of the
monitor(BDL4631V: approx. 34.6 kg). Screw hooks (commercially available), of ring type rather than C-shaped screw hooks (with opening), are
recommended.
Caution:
Though the recommended prevention from falling is intended to lessen the probability of injury and damage, it doesn’t assure its effectiveness
against any kind of earthquake or disaster.
Before moving the monitor, remove the rope that is securing the monitor.
Way II: Mount the monitor on the wall
Before mounting the monitor to the wall, make sure that the system has been power-off and you have obtain a standard wall-mounting kit
(commercially available). Using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America is recommended.
Tabletop stand
1. Lay a protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch
the screen face.
2. This device cannot be used or installed without the Tabletop Stand or other mounting accessory. Make sure all these stuffs are ready for wall-
mount installation.
3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the
equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation.
4. For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer than the thickness of the mounting bracket) and tighten them
securely. (Recommended torque: 470 - 635N•cm).
Caution:
For preventing the monitor from falling.
Install the monitor with metal brackets for wall or ceiling installation (commercially available) on your own responsibility. For detailed procedures of
installation, refer to the instructions of the metal brackets.
To lessen the probability of injury and damage resulting from fall of the monitor in case of earthquake or other disaster, be sure to consult the
bracket manufacturer for installation location.
To lessen the risk of falling of the monitor, thread commercially available rope (having a load capacity at least 1960N (200kgf)) through the handles
at the right and left of the monitor and secure the rope to the wall mount brackets or ceiling mount brackets.(Refer to the first paragraph of this
page.)
Protective Sheet
Table
Handles
Screw Holes
Screw hook
Clamper
Screw
Rope
* Clamper and Screw here is not supplied.

User Manual BDL4631V/00
14
Ventilation Requirements for enclosure locating
To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.

User Manual BDL4631V/00
15
Setup Procedur e
1. Install the system on the right location
CAUTION:
THE LCD MONITOR MUST BE MOVED OR INSTALLED BY
TWO OR MORE PERSONS.
Failure to follow this caution may result in injury if the LCD
monitor falls.
CAUTION:
DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY
YOURSELF .
The LCD display must be installed by a qualified technician.
Contact your dealer for mor e information.
CAUTION:
DO NOT MOUNT OR OPERATE THE DISPLAY UPSIDE DOWN,
FACE UP, OR FACE DOWN.
CAUTION:
DO NOT INSTALL THE LCD MONITOR WHERE IT WILL BE
EXPOSED TO DIRECT SUNLIGHT.
Failure to follow this caution will result in display defects.
IMPORT ANT :
Lay the protective sheet, which was wrapped ar ound the LCD monitor
when it was packaged, beneath the LCD monitor so as not to scratch
the panel.
2. Install the remote contr ol batteries
The remote control is powered by 1.5V AAA batteries. T o
install or replace batteries:
1. Press and slide to open the cover.
2. Align the batteries according to the (+) and (–) indications inside
the case.
3. Replace the cover.
CAUTION:
Incorrect use of batteries can result in leaks or bursting. Be
car eful especially about the following points.
• Place “AAA” batteries matching the + and - signs on each battery
to the + and - signs of the battery compartment.
• Do not mix battery types.
• Do not combine new batteries with used ones. It causes shorter
battery life or leakage of batteries.
• Remove dead batteries immediately to pr event battery
liquid from leaking into the battery compartment. Don't touch
exposed battery acid, it cause damage to your skin.
NOTE:
If you do not intend to use the Remote Control for a long period,
remove the batteries.
3. Connect to exter nal equipment
• T o protect the connected equipment, turn off the main power
befor e making connections.
• Please refer to section “Connectivity”P.18~P.22 for operations. .
4. Connect power cord
• The power outlet socket should be installed as near to the
equipment as possible, and should be easily accessible.
• Fully insert the prongs into the power outlet socket. Loose
connection may cause noise.
NOTE:
Please r efer to “Safety Operation”section of this manual for
proper selection of AC power cord.
Cable belt Cable Holder
5. Turn on the power of the
attached exter nal equipment
When connected with a computer, turn on the power of the computer
first.
6. Operate the attached external equipment
Display the signal from the exter nal equipment.
7. Adjust the sound
Make adjustments to lower or to rise the volume as required.
8. Adjust the scr een
Make adjustments to the display position or settings if r e quired.
Use the Cable belt
to secure the
cables firmly.

User Manual BDL4631V/00
16
9. Adjust the image
Make adjustments to brightness or contrast if required.
10. Recommended Adjustment
T o reduce the risk of “image persistence”, please adjust the
following items based on the application being used.
“POWER SAVE”, “PANEL SAVING”, “SIDE BORDER COLOR”,
“DA TE AND TIME” , “SCHEDULE”.
11. To prevent the main power switch
from being changed
T o pr event the possibility of main power switch being carelessly
pushed, please attach the main switch cover (accessory) onto it.
NOTE:
With the main power switch cover in place, the main power switch
can not be turned off. Remove main power switch cover in order to
turn off the display.
Screw
Main switch cover

User Manual BDL4631V/00
17
Install the LCD Monitor in Portrait M ode
BDL4631V can be installed in portrait position, under the following conditions:
Caution:
Portrait mode is ef fective only when wall-mounted or ceiling-mounted. The feet can not be used for the monitor in portrait position.
Placing the monitor in portrait position, will shorten the average life of the LCD backlight.
Operational Envir onment (T emperatur e) shall be limited, as shown below:
Operational
Envir onment
Te mperatur e
5 - 35 °C / 41 - 95 °F
Humidity
20 - 80 % (without condensation)
Please orientate the monitor in the direction shown as the right figure:
Do not place monitor in landscape in any other manner .
How to set-up
1. Remove the feet if they are attached.
2. The “ ” logo should be on the RIGHT side when facing the monitor.
How to Remove the Logo for landscape mode?
1. Prepare a piece of paper with a cutting area of logo as a protector to
prevent the front bezel from scratching.
2. Using an knife, carefully remove the logo sticker with the paper placing
beneath.
3. Tear off the logo sticker.
How to Use the Logo Guider for Portrait Mode?
1. Before applying, make sure the guider is well shaped. The "PHILIPS"
sticker attached on the end of it could be folded back as figure a.
2.Turn back the logo end of the guider and remove the sticky tape of the
logo.
3. Slide the logo guider along the short side of the front bezel as figure c &
then re-turn the logo end of the guider back to the right side.
4. With your left hand fixing the guider, scrunch the logo by your right hand
to make it stuck firmly on the front bezel.
5. Remove the guider and leave the logo over the front bezel.
Counterclockwise Clockwise